FURUNO SFD-1010/1012 10 12 Flex Function Display User Guide
- September 12, 2024
- FURUNO
Table of Contents
FURUNO SFD-1010/1012 10 12 Flex Function Display
Specifications
- Model : SFD-1010/1012
- Display : Flex Function Display
- Touch Screen : Yes
- Key Operation : Yes
- Sensors: Radar Sensor, Fish Finder Sensor, Multi Beam Sonar
- Maximum Fixed Marks : 20
Product Usage Instructions
Setup Operations:
When turned on for the first time, follow these steps:
- Language Selection: Tap English, then OK.
- Display Selection: Choose LANDSCAPE or PORTRAIT.
- Sensor Selection: Select a RADAR SENSOR, FISH FINDER SENSOR, or MULTI BEAM SONAR.
Menu Operation (Radar Sensor)
- Tap the icon on the top-left to show InstantAccess barTM.
- Short press to access the BRILLIANCE menu.
- Adjust settings by dragging the menu window or using arrow keys.
Other Key Operations
- Change Range: Zoom in/out using the corresponding buttons.
- TX/STBY Button: Toggle between transmit and standby mode.
- Fixed Mark: Record and display cursor longitude and latitude. Use [ ] key to delete marks.
FAQ
Q: How do I lock the touch operation?
A: Long press to activate Touch Lock feature.
Q: How can I turn off the unit?
A: Long press the Power Off button or keep pressing the power key for over
three seconds.
Q: What is the maximum number of fixed marks that can be displayed?
A: A maximum of 20 fixed marks can be displayed. The oldest mark is
automatically deleted when the limit is reached.
This guide provides the basic operating procedures for this equipment. For detailed information, see the Operator’s Manual which can be downloaded from the Quick Response Code on the right side. The brand and product names mentioned in this guide are trademarks, registered trademarks or service marks of their respective holders. The screenshots shown in this Operator’s Guide are taken in the landscape format. The display layout is different in the portrait format. Key operation is available in the portrait format.
Touch screen and key operation
Tap
- Select menu item.
- Move the cursor to tapped location.
- Tap the button shown on the screen and set.
Drag/Swipe
- Move the cursor.
- Scroll the menu.
- Select a range.
- Adjust the setting with the slider bar.
Key Operation
- Setup operations (When turned on for the first time.)
When Radar Sensor is selected
Menu Operation
- Other key operations, function box and display
- Adjustment of Gain, Sea and Rain
- Off-center
When Fish Finder Sensor is selected
When DFF-3D is selected