MAJORITY P100 Party Speaker User Manual

MAJORITY P100 Party Speaker

Box Contents

What’s in the Box?

• A. The Majority P100 Party Speaker
• B. Wired Microphone
• C. USB Type-C Charging Cable
• D. User Manual

Controls & Functions

Front & Top View

• 1. Mode/Lighting
• 2. Previous
• 3. Play/Pause/TWS
• 4. Next
• 5. EQ
• 6. Volume +/-

Back View

• 7. Charging LED light
• 8. Microphone Port
• 9. Switch ON/OFF
• 10. TF Card Playback Port
• 11. USB Type-C Charging Port (DC5V)
• 12. USB Playback Port

Basic Information

Please note that the instructions within this user manual will refer to the button number on the speaker (Ref ‘number’), in accordance with the diagrams from pages 4-5.

Basic Information

• Remove the packaging and prepare your Majority P100 Party Speaker for use.

Charging Time

• Insert the USB-C type cable at the back of the unit (Ref.11) and connect with a plug (DC5V) to the mains for charging. The charging LED light (Ref.7) will show a red light.
• It takes up to 8 hours to fully charge the Majority P100. The charging LED light will switch off when the battery is fully charged.
• When you have finished charging, disconnect the party speaker from the power source and take advantages of its portability.

Please Note

• It is recommended to charge the P100 when not in use for longer battery life.

Playtime

• The Majority P100 has an internal rechargeable battery. Once fully charged, the speaker can be used on battery power for up to 7 hours.

Please Note

• The playtime may vary based on the volume level and lighting modes usage while operating on battery power.

Microphone

• Insert the wired microphone included in the box into ‘MIC’ port (Ref.8) at the back of the unit. The microphone can be used in all modes: Bluetooth, TF Crad, USB or FM Radio.

Power ON/OFF

• Slide the ‘Switch’ button (Ref.9) to the left or the right to power on/off the Majority P100.

Party LED Lighting:

• Press and hold the ‘Mode/Lighting’ button (Ref.1) for 2-3 seconds to change the Light Mode.
• There are four lighting modes available to choose from which can be used in all modes: BT, FM radio, USB & SD.

Control Buttons Functionality

‘Mode/ Lighting’ Button (Ref.1)

• Press this button repeatedly to change the Party Speaker Modes: Bluetooth, TF Card, USB or FM Radio.
• Press and hold this button for 2-3 seconds to change the Party Speaker Lighting Modes.

‘Previous’ Button (Ref.2)

• Press to skip and play the previous audio track in Bluetooth, TF Card or USB Playback Mode.
• Press this button in FM Radio Mode to play the previous FM radio station listened to.

Play/Pause/TWS Button (Ref.3)

• Press the ‘Play/Pause/TWS’ button (Ref.3) to play or pause music.
• Press and hold for 2-3 seconds to process an automatic radio stations scan while in FM Mode.
• The ‘TWS’ function can only be used with two Majority P100 Party Speakers which you can connect and use as two Bluetooth party speakers.

Please note: Each package contains one Majority P100 Party Speaker.

To connect two Majority P100 Party Speaker’s you should first ensure that both speakers are powered on and not paired individually with other devices via Bluetooth. Press the ‘TWS’ button (Ref.3) twice on one of the speakers, and both will connect wirelessly with each other. A voice-prompted message will then be heard. Once both Majority P100’s are connected, switch on the Bluetooth connectivity on your phone, and then search for the ‘Majority P100’. Select and pair with the speakers. You can now play audio on both party speakers. To disconnect, press the ‘TWS’ button (Ref.3) twice on one speaker.

‘Next’ Button (Ref.4)

• Press the ‘Next’ button (Ref.4) to skip and play the next audio track while in Bluetooth, TF Card or USB Playback Mode.
• Press to play the next radio station while in ‘FM Radio’ Mode.

EQ button (Ref.5)

• Press the ‘EQ’ button (Ref.5) to toggle in between equalisers sound modes for more bass or treble as per your preferences. There are 6 equalisers modes in total.

Volume rotary knob (Ref.6)

• Control the volume level -/+ by rotating the ‘Volume’ knob to the left or to the right.

Bluetooth, TF & USB Playback Mode

Bluetooth Mode

• The Majority P100 can be paired via Bluetooth with a phone or a tablet to play audio from via your party speaker.
• Press the ‘MODE’ button at the top of the speaker (Ref.1) repeatedly to change the speaker mode to Bluetooth. A voice-prompted message will prompt the speaker mode.
• Once in Bluetooth mode the speaker is ready to pair. Activate Bluetooth on your device and search for ‘Majority P100’. Select the speaker to pair with your device.
• Once connected, you can start playing audio from your device via your party speaker.

Please Note

• The Majority P100 cannot be paired with Bluetooth earbuds or earphones.

USB Playback Mode

• Press the ‘Mode’ button (Ref.1) repeatedly to change into USB Mode. A voice message will be prompted confirming the mode.
• The USB stick size should be of up to 32GB and must be formatted in FAT32 before adding audio files on it, in supported formats MP3 or WAV.
• Insert the USB stick into the USB port (Ref.12), and the Majority P100 will automatically start playing audio from it.

Please note

• The Majority P100 USB port cannot be used as a connection port with other devices as this is just for playback.

TF Playback Mode

• Press the ‘MODE’ button (Ref.1) at the top of the unit repeatedly to change the speaker mode to ‘TF’. A voice-prompted message will prompt this mode.
• The TF Card should be of up to 32GB, which must be formatted in FAT 32 before adding audio files in supported formats MP3 or WAV.
• Insert the TF card into its port (Ref.10) at the back of the speaker.
• The Majority P100 will then start playing audio form your TF card.

FM Radio

FM Radio Mode

• Press the ‘MODE’ button (Ref.1) at the top of the unit repeatedly to change the speaker mode in ‘FM Radio’. A voice message will prompt this mode.
• Press and hold the ‘Play/Pause/TWS’ button (Ref.3) for 2-3 seconds to start processing an automatic scan for the FM radio stations available at your location.
• Once the search has been completed, the FM radio stations found will be automatically saved and the party speaker. The Majority P100 will then start playing the first FM radio station found.
• Press the ‘PREVIOUS’ (Ref.2) or ‘NEXT’ (Ref.4) buttons to play the next or the previous stored FM radio station.

Troubleshooting

No power/function

| Check the switch button on the back of the speaker and make sure is set to ‘ON’.

Ensure the speaker battery is fully charged.

No sound

| Increase the volume using the rotary on the speaker. If paired via Bluetooth with other device and there is no sound, increase the volume level from your device at maximum, and then increase the volume on your speaker as well.

Bluetooth not connecting

| Ensure the Majority P100 is not paired with other devices and is set into Bluetooth Mode.

Ensure your device has

Bluetooth activated and search for the ‘Majority P100’. Select and connect. You will now play audio via your party speaker.

Support

• If you require further assistance with your Majority product, please contact our support team on the Majority website: www.majority.co.uk/support

Specification & Warranty

Specification

Warranty

• Register your product within 30 days of purchase at www.majority.co.uk to activate your extended warranty. Terms and conditions apply.

Safety Information

1. Read these instructions.
2. Keep these instructions. Instructions are also available for download at www.majority.co.uk.
3. Heed all warnings.
4. Follow all instructions.
5. Do no clean the apparatus near or with water.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use accessories specified by the manufacturer.
11. Unplug this apparatus during light storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel.
13. No naked flame sources, such as a lit candle should be placed on the apparatus.
14. Dispose of used electrical products and batteries safely according to your local authority and regulations.

ADDITIONAL WARNINGS

• The apparatus shall not be exposed to dripping, splashing or objects filled with water.
• The main plug is used to disconnect the device. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely.
• Battery shall not be exposed to excessive heat.

RECYCLING ELECTRICAL PRODUCTS

You should now recycle your waste electrical goods and in doing so help the environment.

This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished.

IMPORTANT: Please read all instructions carefully before use and keep for future reference.

• Risk of electric shock. Do not open.
• Read all instructions carefully before use and keep for future reference.
• When servicing, use only identical replacement parts.

ATTENTION

• RISK OF ELECTRIC SHOCK
• DO NOT OPEN

IMPORTANT: Please read all instructions carefully before use and keep for future reference

Warranty

• 3 Year Warranty

Register your product online for a FREE 3 year extended warranty at: www.majority.co.uk

FAQ

Frequently Asked Questions

• No power/function or No sound:
  • Potential Cause/Solution: Check the switch button on the back of the speaker and ensure it is set to ‘ON’. Make sure the speaker battery is fully charged. If there is no sound, increase the volume using the rotary on the speaker or your connected device.
• Bluetooth not connecting:
  • Potential Cause/Solution: Ensure the Majority P100 is not paired with other devices and is set into Bluetooth Mode. Activate Bluetooth on your device and search for ‘Majority P100′. Select and connect to play audio via your party speaker.

EU Declaration of Conformity

I hereby declare that the product:

• Product Name: Majority P100 Party Speaker
• Model: 1000002991
• Brand Name: Majority

Satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/35/EU and 2014/30/EU, 2009/125/EC, 2012/19/EU, 2014/53/EU, 2011/65/EU, 1907/2006.

2014/35/EU (LVD Directive)

• EN62368-1:2014+A11:2017

2014/30/EU (EMC Directive)

• EN55032:2015+A11:2020, Class B, EN IEC 61000-3-2: 2019, EN61000-3-3: 2013+A1:2019, EN55035: 2017, EN 301 489-1 V2.2.3 (2019-11), EN 301 489-17 V3.2.2 (2019-12)

2009/125/EC (ERP Directive)

• EN50564: 2011, EN62311: 2008

2012/19/EU (WEEE Directive)
2014/53/EU (RED Directive)

EN55032:2015+A11:2020, Class B, EN IEC 61000-3-2: 2019, EN61000-3-3: 2013+A1:2019, EN55035: 2017, EN 301 489-1 V2.2.3 (2019-11), EN 301 489-17 V3.2.2 (2019-12), EN 303 345-1 V1.1.1 (2019-06), EN 303 345-3 V1.1.0 (2019-11), EN 303 345-4 V1.1.0 (2019-11), ETSI EN 300 328 V2.2.2 (2019-07), EN62368-1:2014+A11:2017, EN 62479: 2010, EN 50663:2017

2011/65/EU & 2015/863/EU (RoHS Directive)
1907/2006 (REACH Directive)

All essential test suites have been carried out.
This declaration is issued under the sole responsibility of iZilla Ltd.

Point of Contact: Eddie Latham | Founder

Signed:

Date: Nov 2023

• UK: Newton House, 2 Pioneer Court, Histon, Cambridge, CB24 9PT
• EU RP: AR Experts, P.O. Box 5047, 3620 AA Breukelen, The Netherlands
• US: iZilla Ltd, C/O A.N. Deringer, Inc., 19520 Wilmington Ave, Rancho Dominguez, CA, 90220
• Majority is owned and operated by iZilla Ltd. Registered in England with Company No: 08520738

www.majority.co.uk

References

• Majority – Home Audio | DAB & Internet Radios | Soundbars
• Support – Majority

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>