Kmart B-0458-1 Iridescent Mirror Aroma Diffuser Instruction Manual
- September 12, 2024
- Kmart
Table of Contents
B-0458-1 Iridescent Mirror Aroma Diffuser
“`html
Product Information
Specifications
- Model: B-0458-1
- Dimensions: 14.5cm (L) x 18.5cm (H)
Product Usage Instructions
Getting Started Operating Instructions
-
Remove the glass cover and the reservoir lid.
-
Insert the DC jack of the adaptor into the DC socket at the
bottom of the base. -
Fill the reservoir with water. For maximum run time, fill to
‘Max’ line – 100ml. Always use room temperature water.
Diffuser Settings
- Place the diffuser on a stable and level surface.
- Press Power button (2) to turn the diffuser on.
Light Settings
-
Press Light button (7) to control the light.
-
There are 7 light colours with various brightness. Press the
light button repeatedly to go through different settings. -
You can choose and set the light colour. The colour sequence of
the light button control is: Automatic color changing – current
color – dim red – bright red – dim purple – bright purple – dim
yellow – bright yellow – dim blue – bright blue – dim sky blue –
bright sky blue – dim green – bright green – dim white – bright
white – off.
Moving and Storage Instructions
DO NOT move the diffuser while in use. Spillage may cause damage
to the diffuser and other parts.
FAQ
Can I use any type of essential oils with the diffuser?
No, only use essential oils or water-based fragrances. Acidic
oils can damage the diffuser.
Is it safe to leave the diffuser unattended overnight?
No, DO NOT leave the diffuser on or unattended overnight for
safety reasons.
What is the maximum water capacity for the reservoir?
The maximum water capacity for the reservoir is 100ml, fill to
the ‘Max’ line for maximum run time.
“`
Glass Mirror Aroma Diffuser
0.5H 1H 2H 3H
Model B-0458-1 K: 43390830 T: 69291388
IMPORTANT! Care should be taken with the use of diffusers around animals. Both
the choice of essential oils and where animals are should be taken into
consideration when in use. WARNING- TO REDUCE THE RISK OF BURNS, FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSONS: For filling, please refer to section
“GETTING STARTED OPERATING INSTRUCTIONS” For cleaning and descaling, please
refer to section “CARE AND MAINTENANCE” 1. DO NOT block the air inlet at the
bottom of the
diffuser. 2. DO NOT use the diffuser on flammable
surfaces or near flammable materials, heat sources or open flames. 3. DO NOT
use if the adaptor or diffuser is damaged. If the diffuser malfunctions, is
damaged or is immersed in water, stop using the diffuser. 4. Only use with the
adaptor provided. 5. Indoor dry location use only.
6. DO NOT touch the ultrasonic disc with a finger or scrape it with metal
tools to avoid damage to the disc.
7. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
8. Children should be supervised to ensure that they do not play with the
appliance.
9. DO NOT immerse the diffuser in water or any other liquid.
10. Always use fragrance with water. Do not use fragrance on its own.
11. DO NOT leave the diffuser on or unattended overnight.
12. Only use with essential oil or water-based fragrance. Acidic oil can
damage the diffuser. Check the instructions of the oil or fragrance.
13. The appliance is only to be used with the recommended vaporizing medium.
The use of other substances may give rise to a toxic or create a fire risk.
14. Use provided AC adaptor only. 15. Unplug the appliance during filling and
cleaning.
GETTING STARTED OPERATING INSTRUCTIONS
1. Remove the glass cover and the reservoir lid. 2. Insert the DC jack of the
adaptor into the DC
socket at the bottom of the base. 3. Fill the reservoir with water. For
maximum run
time, fill to ‘Max’ line – 100ml. Always use room temperature water.
CAUTION Do not overfill the reservoir. Do not use water over 45°C. Do not fill
water through the vent. 4. Add 2 to 3 drops of essential oil to a full tank of
water. For a stronger fragrance add more drops of oil, but do not exceed 4
drops. 5. DO NOT add more than 2 drops of essential oil to 20ml of water.
Adding too much oil will damage the diffuser. 6. Replace the reservoir lid and
the cover securely. 7. Plug the AC adaptor into a wall outlet.
14.5cm(L)X18.5cm(H)
1. Ultrasonic disc 2. Power button 3. 0.5-hour light 4. 1-hour light 5.
2-hour light 6. 3-hour & steady on light 7. Light button 8. Vent 9. Reservoir
lid 10. Reservoir
9
10 7
DIFFUSER SETTINGS 1. Place the diffuser on a stable and level surface. 2.
Press Power button (2) to turn the diffuser on.
µPress once for 30 mins µPress 2 times for 60 mins µPress 3 times for 2 hours
µPress 4 times for 3 hours & steady on 3. Press and hold Power button to turn
off the diffuser. AUTO-OFF FUNCTION The diffuser will turn off automatically
when the reservoir is out of water or the timer is up.
LIGHT SETTINGS 1. Press Light button (7) to control the light. 2. There are 7
light colours with various
brightness. Press the light button repeatedly to go through different
settings. 3. You can choose and set the light colour. The colour sequence of
the light button control is : Automatic colour changing-current colour-dim
red-bright red-dim purple-bright purple-dim yellow-bright yellow-dim blue-
bright blue-dim sky blue-bright sky blue-dim green-bright green-dim white-
bright white-off.
MOVING AND STORAGE INSTRUCTIONS
1. DO NOT move the diffuser while in use. Spillage may cause damage to the
diffuser and other parts.
2. Always hold both the base and the cover when moving the diffuser.
3. Empty the reservoir and clean the diffuser before storing.
CARE AND MAINTENANCE 1. Always turn OFF and unplug the diffuser for
care and maintenance. 2. Clean the reservoir before using a different
essential oil.
3. Empty the reservoir using the drain side. 4. Clean the reservoir with a
soft cloth. 5. Clean scale deposits on the ultrasonic disc
with clean water. 6. DO NOT use metal or hard abrasive to scrape
the ultrasonic disc. 7. Clean the ultrasonic disc regularly to avoid
scale building up. 8. If the ultrasonic disc becomes excessively
scaled, clean it repeatedly to descale. 9. Dry the diffuser completely before
using it
again. 10. DO NOT use vinegar or other corrosive
cleaning agents. 11. Wipe off the fan inlet regularly at the bottom
with a dry, soft cloth.
12 Month Warranty
Thank you for your purchase.
Your new product is warrantied to be free from defects in materials and
workmanship for the period stated above, from the date of purchase, provided
that the product is used in accordance with accompanying recommendations or
instructions where provided. This warranty is in addition to your rights under
the Australian Consumer Law.
Troubleshooting
Problem Unit does not work
Possible Reasons Power cable not connected Power device failure
Solution Re-connect power with cord cable and press the button
Change power device
Water reservoir might be dirty
Clean the water reservoir
Unable to Spray mist
Too much water inside the reservoir Cover is not closed properly
Make sure water inside the reservoir is not over max water level
Make sure the cover is tightened
Is the bottom air inlet dirty?
Clear away the dust in the bottom air inlet
Water level very low
Fill with more water
Caution: DO NOT shake or tilt the product when there is water in the reservoir or else the product will not work properly
14.5cm(L)X18.5cm(H)
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
We will provide you with your choice of a refund, repair (where possible) or
exchange (availability dependent) for this product if it becomes defective
within the warranty period. The business will bear the reasonable expense of
claiming the warranty.
This warranty will no longer apply where the defect is a result of alteration,
accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre as listed below, for the entity you purchased this product
from, for any difficulties with your product. Warranty claims and claims for
expense incurred
in returning this product can be addressed to the respective Customer Service
Centre.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major
failure.
Contact for Kmart purchases
Kmart Australia Ltd. C/- Customer Service Centre 690 Springvale Road, Mulgrave
Vic 3170 Customer Service: 1800 124 125 (Australia) or 0800 945 995 (New
Zealand) or via Customer Help at kmart.com.au
Contact for Target purchases
Target Australia Pty Ltd C/- Customer Service Centre 2 Kendall Street,
Williams Landing, Vic, 3027 Customer Service: 1300 753 567 or via Customer
Help at target.com.au/help/contact-us