Charging Systems Africa CS 200 PSI Air Inflator User Manual

Charging Systems Africa CS 200 PSI Air Inflator

SAFETY WARNINGS

• This product is not a toy and should not be used by children under 16 years old. Keep a safe distance from children during inflation.
• The product contains a built-in lithium battery. Do not expose it to fire as it may cause overheating and increase the risk of combustion or explosion. Keep the air inflator away from high temperatures, such as prolonged sun exposure.
• Store the product within the temperature range of -20°C to 60°C. Extremely hot environments may damage the battery or reduce the air pump’s lifespan.
• To maintain battery efficiency, charge the air pump at least once every three months, even during periods of non-use.
• Use this product in a dry and clean environment. Avoid exposing it to sand and dust, as they can damage the product. Do not wash the product with water.
• To charge the product, use a qualified 5V/3A or fast charger along with the provided charging cable.
• After extended operation, the metal joint between the air hose and the air pump may become hot. Avoid directly contact to prevent burns.

Have more questions?
Email us, We are ready to help.

HAZARDOUS SUBSTANCE

BATTERY LEVEL INDICATOR & CHARGING

• Battery Level Indicator
  The battery level is shown by four bars, with each bar representing 25%. 1 bar = under 25%.

  • 2 bars = between 25% and 50%.
  • 3 bars = between 50% and 75%.
  • 4 bars = between 75% and 100%.
    Note: The battery indicator will flash when the battery level is below 25%.

• Charging
  Fully charge the inflater before first use. To charge, please use a certified 5V/3A USB charger or fast charger.
  While charging:

  • 1 bar flashing = under 25%.
  • 1 bar steady on, 2nd bar flashing = between 25% and 50%.
  • 2 bars steady on, 3rd bar flashing = between 50% and 75%.
  • 3 bars steady on, 4th bar flashing = 75% and 100%.
  • All 4 bars steady on = fully charged.1

NOTE

• When fast charging is recognized, the corresponding icon on the display will light up.
• Other functions cannot be used while being charged.

AIR PRESSURE REFERENCE TABLE

DETECTING THE CURRENT PRESSURE

When the inflater is turned on, connect the air hose to the device or tire to be inflated, and then the LED screen will display the current pressure value.

DETERMINING THE RIGHT PRESSURE VALUE
To avoid injuries from bursting items due to over-inflation, make sure you are aware of the maximum inflation pressure before you start.

The recommended air pressure for tires on cars, bicycles, and motorcycles is typically indicated on the sidewall of the tire. For cars, you can also find the recommended tire pressure inside the driver’s side door.
For details concerning load carrying capacity and recommended air pressures, refer to your vehicle’s instructions or manual.

TROUBLESHOOTING

AIR5-200 USAGE INSTRUCTIONS

INSIDE THE BOX

BUTTONS & LED DISPLAY

1. Real-time pressure value
2. Current unit
3. Preset pressure value
4. Preset mode
5. Increment button
6. Power button
7. LED light button
8. Decrement button
9. Fast charging indicator
10. Battery indicator
11. LED light mode
12. High-temperature warning
13. Mode button
14. USB-A charging port
15. LED light
16. Air outlet

SPECIFICATIONS

STEPS TO INFLATE

1. STEP 01 CONNECTING WITH THE HOSE OR A NOZZLE:

   • Connecting with the hose:
   1. Connect the air hose to the product first
   2. After setting the preset pressure, connect the air hose to the tire
   3. Press the power button to inflate
   • Connecting with a nozzle:
   1. Connect the air hose to the product first
   2. After setting the preset pressure, connect the air hose to the nozzle
   3. Attach the nozzle to the tire
   4. Press the power button to inflate

2. STEP 02 TURNING THE INFLATOR ON:
   Long-press 1.5 seconds to turn on.
   To turn off the device, long-press 1.5 seconds.
   The inflator will automatically turn off in the cases below:

3. During charging.

4. When the LED light is turned on and the inflating has not started. To activate the inflator, press any button except the LED light button.

5. When the current air pressure is higher than or equal to the preset air pressure.

6. When high temperature protection occurs during inflation.

7. During the inflation process, if no pressure rise is detected, it will automatically stop inflating in 2 minutes.

8. STEP 03 PRESET PRESSURE VALUE:

   • Switch Modes:
     Click the mode button, the mode status will flash, and then click the mode button to choose from the following five modes.

   • Switch Units:
     Press mode button for 1.58, the unit status will flash, and click again in the flashing state to switch PSI/BAR/KPA.
     NOTES:

   • After completing the inflation of an item, the manual mode will remember the target pressure value as its default pressure setting.

   • The initial value of free mode is 200PSI. Please use the default value carefully according to your needs.

   • Restore factory settings:
     Press and hold the LED light button and the mode button at the same time for 3 seconds.

   • Adjusting the Preset Pressure:
     After selecting a mode, press + or – to increase or decrease the target pressure value. For quick adjustments, press and hold the + or – button.

   • LED Light:
     When the device is powered on, press the LED light button to switch between the light’s On, Flash, SOS and Off modes.
     NOTE: When the LED light is turned on and there is no inflating for 3 minutes, the air inflater will enter the “energy-saving” mode, and the display will only show the battery level icon and the LED light status icon. Press any button other than the LED light button to end the energy-saving mode.

9. STEP 04 START INFLATION:

10. Start Inflating
    Press the power button to start inflating.
    Note: After running for a period of time, the air compressor and hose will become hot. To avoid burns, wait for them to cool down before removing the hose.

11. Stop Inflating
    The air inflater will automatically stop inflating when it reaches the preset pressure value. You can also press the power button to manually stop the process.
    Note: If a high-temperature alarm occurs, the inflater will stop and the alarm will reset after a few minutes of cooling.
    You can then resume inflation.
    Warning: Balloons, swimming rings, inflatable cushions, and similar items cannot be inflated automatically as their air pressure requirements are below the minimum pressure range of the air inflater. These items can only be inflated using the free mode.

12. STEP 05 DISCONNECTING THE AIR HOSE:
    After inflation, the air hose may become very hot. To prevent burns, disconnect the hose from the valve. There may be some air leakage before disconnecting, so remove the air hose shortly once it cools down.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>