BLACK LION AUDID TRS-BT 46 Point Gold Plated TRS Patchbay Instruction Manual
- September 9, 2024
- BLACK LION AUDID
Table of Contents
TRS-BT 46 Point Gold Plated TRS Patchbay
“`html
Product Specifications
- Model: PBR TRS-BT
- Power Requirement: Power supply needed for Bluetooth audio
- Bluetooth Version: Compatible with Bluetooth devices
- Outputs: Left and Right TRS jacks for Bluetooth audio
Product Usage Instructions
Connecting Bluetooth
-
Install the PBR TRS-BT in the desired location and plug it into
a power source (only required for Bluetooth audio). -
Connect your equipment to the appropriate outlets on the PBR
TRS-BT. -
To activate Bluetooth, plug in the power supply and press and
hold the Bluetooth Sync button. -
When the Bluetooth Status LED blinks, the device is ready to
pair with other Bluetooth devices.
Buttons and LEDs
-
Power Inlet: Connect power supply here. Only
necessary for Bluetooth connection. -
Bluetooth Sync: Press and hold to set the
device to sync mode for pairing new devices. -
Bluetooth Status: Blinking LED indicates
readiness to pair; lit LED indicates device is synced. -
Bluetooth Left Output: TRS jack for left
channel of Bluetooth audio. -
Bluetooth Right Output: TRS jack for right
channel of Bluetooth audio.
Important Safety Instructions
- Read and keep the instructions for reference.
- Follow all warnings and instructions provided.
- Avoid using near water or heat sources.
- Clean with a dry cloth only.
- Install according to manufacturer’s guidelines.
Compliance and Warranty Information
The product complies with safety and emissions standards
including IEC62368 and FCC Part 15-B. Do not attempt to service the
unit yourself to avoid voiding the warranty. Check the product upon
receipt and contact customer service in case of any issues.
Contact Information for Service
If service is required, obtain a Return Authorization number (RA
) before shipping the unit back. Pack the unit securely using
original materials to prevent damage during shipping.
FAQ
Q: Can I use the PBR TRS-BT without a power supply?
A: The power supply is required for Bluetooth audio
functionality, so it is recommended to use it with a power
source.
Q: How do I know when the PBR TRS-BT is ready to pair with a
device?
A: The Bluetooth Status LED will blink when the device is in
pairing mode and ready to connect with other devices.
“`
PBR TRS-BT
46-Point Gold-Plated TRS Patchbay plus Bluetooth®
CONNECTING BLUETOOTH
Once you have installed your PBR TRS-BT where you need it, plug it in to an
appropriate power source. Note: The power supply is only needed for Bluetooth
audio.
Plug in your equipment to the correct outlets on the PBR TRS-BT.
Once the power supply is pluged into the power inlet, the PBR TRS-BT Bluetooth
is active. To sync your device to the PBR TRS-BT, press and hold the Bluetooth
Sync button. Once the Bluetooth Status LED has started to blink, devices are
able to find the PBR TRS-BT via Bluetooth connection.
1. Power Inlet: Connect power supply here. Power is only necessary for
Bluetooth connection.
2. Bluetooth Sync: This button operates the Bluetooth Sync. Press and hold
this button to set the PBR TRS-BT to “sync mode”, when connecting new devices.
3. Bluetooth Status: When this LED is blinking, the PBR TRS-BT is ready to be
paired. When this LED is lit, the PBR TRS-BT is synced to a device.
4. Bluetooth Left Output: This TRS jack outputs the left channel of the
Bluetooth audio.
5. Bluetooth Right Output: This TRS jack outputs the right channel of the
Bluetooth audio.
To sync another device to the PBR TRS-BT, press and hold the Bluetooth Sync button.
4
1
5
On phantom power We advise against running phantom power through your
patchbay, as this makes it possible to send phantom power to a device not
designed to handle it; expensive damage could result! If you decide to route
phantom power through your patchbay, always ensure that your phantom power
source is turned off before changing any connections. Failure to do so can
cause unbalanced shorts when a plug is inserted or removed, damaging input
transistors of hardware processors, or damaging the transformer or ribbon of a
ribbon mic.
3
2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. 2. Keep these instructions 3. Heed all warnings.
4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean
only with dry cloth. 7. Install in accordance with the manufacturer’s
instructions. 8. Do not install near any heat sources such as radiators, heat
regis-
ters, stoves, or other apparatus that produce heat. 9. Do not defeat the
safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The wide blade
or third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet. 10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus. If the power cord becomes frayed, stop using immediately.
11. Use only attachments/accessories specified by the manufacturer 12. Use
only with a cart, stand, tripod, bracket or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over. 13.
Unplug this apparatus during lightning storms or when unused for long periods
of time. 14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped. 15. This apparatus shall not be exposed
to dripping or splashing, and no object filled with liquids, such as vases,
shall be placed on the apparatus. 16. The mains plug or power inlet on the
product is used as the disconnect device, so the disconnected device shall
remain readily operable when reconnected. 17. Any changes or modifications not
expressly approved in this manual could void your authority to operate this
apparatus.
IMPORTANT !
The lightning flash with an arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
This product complies with all international standards for safety and
emissions including IEC62368 and FCC Part 15-B.
Do not attempt to service this unit yourself, as it will void your warranty.
Please check your unit carefully upon receipt and return to place of purchase
immediately if there are any problems with the product. After that, the
standard Black Lion Audio 3 YEAR warranty will apply to defects in materials
and workmanship.
U.S.A. Should your Black Lion Audio product require service, please contact us
on our customer service site: https://www.blacklionaudio.com/contact. You must
obtain an RA # (Return Authorization number) from us before shipping a unit
back to us. This RA # must be clearly written on the outside of the box.
Please safely pack the units…It is best to use the original packing materials.
Black Lion Audio cannot be responsible for any damages incurred in shipping to
us due to poor packaging. PLEASE PACK CAREFULLY and FULLY INSURE THE SHIPMENT.
INTERNATIONAL For service or warranty assistance, please contact the Black
Lion Audio distributor in your country through the dealer from whom you
purchased this product.
LIMITED 3 YEAR WARRANTY Black Lion Audio’s PBR TRS-BT is warranted by Black
Lion Audio to be free from defects in materials and workmanship for the period
of THREE (3) YEARS to the original purchaser. In the event of such defects,
the product will be repaired without charge or, at our option, replaced with a
new one if delivered to Black Lion Audio prepaid, together with a copy of the
sales slip or other proof of purchase date. The warranty excludes problems due
to normal wear, abuse, shipping damage or failure to use the product in
accordance with the specifications.
All parts and labor are covered under this Limited Warranty. However, if it is
determined by Black Lion Audio that the device was damaged or made defective
through abuse, we reserve the right to charge the customer for the cost of the
repair.
Black Lion Audio shall not be liable for damages based upon inconvenience,
loss of use of the product, loss of time, interrupted operation or commercial
loss or any other damages, whether incidental, consequential or otherwise.
This warranty gives you specific legal rights, and you may have other rights,
which will vary from state to state.
This warranty is not transferable.
RAD Distribution 180 Carpenter Ave. Middletown, New York, 10940 USA
Revised 07-31-24
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>