POPFAN 52k096 Natural 52 Inch Modern Ceiling Fan with Led Lights User Guide
- August 3, 2024
- POPFAN
Table of Contents
USE AND CARE GUIDE
Safety Information
READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN
INSTALLING THE FAN AND SANE INSTRUCTIONS.
Warning:
Kindly turn off the power when connecting cables.
- To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin
- All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician
- The outlet box and support structure must be securely mounted and capable of reliably supporting 35 Ibs. (15.9 kg} Use only UL Listed outlet boxes marked “Acceptable for Fan Support of 35 Ibs. (15.9 kg) or less”
- The fan must be mounted with a minimum of 7 ft. (2.1 m} clearance from the trailing edge of the blades to the floor.
- Do not place objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan
- Electrical diagrams are for reference only. Light kits that are not packed with the fan must be Ul-listed and markec suitable for use with the model fan you are installing Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductar on one side of the outlet box
- All set screws must be checked and re-tightened where neccessary before installation.
WARNING: To reduce the risk of personal injury. do not bend the blade
brackets (also referred to as flanges) during assembly or after installation.
Do not insert objects in the path of the blades.
WARNING: To reduce the risk of fire or electric shock, this fan is NOT
suitabl for use with solid-state speed controls.
WARNING: To avoid possible electrical shock, make sure that the
electricily is lurned off at the main power box before starting work_f you
feel you do not have enaugh electrical wiring knowledge or experience, contact
a licensed alectrician.
WARNING: Electrical diagrams are for reference only. Optional use of any
lignt kit shall be UL-listed and marked suitable for use with this fan
WARNING: To reduce the risk of fire, elecirical shock or personal injury,
ensure that the fan mounting bracket is supported directly from the building
structure or the outlet box marked “Acceplable for Fan Support of 35 1bs.
(15,9 kg) or less”. Use only the screws provided with the ouliet box.
Warranty
The supplier warrants the fan motor to be free from defects in workmanship and
material present at time of shipment from the factory for a lifetime after the
date of purchase by the original purchaser. The supplier also warrants that
all other fan parts, excluding any glass or acrylic blades, to be free from
defects in workmanship and material at the time. of shipment from the factory
for a period of two years after the date of purchase by the original
purchaser. We agree to correct such defects without charge or at our option
replace with a comparable or superior model if the product is returned. To
obtain warranty service, you must present a copy of the receipt as proof of
purchase. All costs of removing and re-installing the product are your
responsibility. Damage to any part such as by accident, misuse, improper
installation, or by affixing any accessories, is not covered by this warranty.
Because of varying climatic conditions this warranty does not cover any
changes in brass finish, including rusting, pitting, corroding, tarnishing, or
peeling. Brass finishes of this type give their longest useful life when
protected from varying weather conditions. A certain amount of “wobble” is
normal and should not be considered a defect. Servicing performed by
unauthorized persons shall render the warranty invalid. There is no other
express warranty. Sofucor hereby disclaims any and all warranties, including
but not limited to those of merchant ability and fitness for a particular
purpose to the extent permitted by law. The duration of any implied warranty
which cannot be disclaimed is limited to the time period as specified in the
express warranty. Some states do not allow a limitation on how long an implied
warranty lasts, so the above limitation may not apply to you.
The retailer shall not be liable for incidental, consequential, or special
damages arising out of or in connection with product use or performance except
as may otherwise be accorded by law. Some states do not allow the exclusion of
incidental or consequential damages, so the above exclusion or limitation may
not apply to you. This warranty gives specific legal rights, and you may also
have other rights which vary from state to state. This warranty supersedes all
prior warranties. Shipping costs for any return of product as part of a claim
on the warranty must be paid by the customer.
Three ceiling installation methods
Accessory drawing
Installation procedure
WARNING: Tum off the electric power during installation and making wire connection.
- Connect the wire which from ceiling fan into the recejver.
- Connect the wire from receiver with the wire from house.
Remote control manual
- Turn off the light and fan at the same time
- Light on/off Light color temperature switch (Press twice with an interval of 2 seconds toswitch a color temperature after turning on the light.)
- 6 Wind Speeds
- Fan off
- 3 Kinds of Timing Turning off the light and the fan when the time is over
- Fan Reverse Mode
- Natural Wind Mode
Note: the remote control must match the same code receiver
When the reversible button is pressed, the fan slowly slows down to a stop and
then begins to reverse.
Fans Balance
Care and Cleaning
Slide the balancing clip on the trailing edge of any blade, halfway between
the holder and tip. Run the fan to check the wobble. If the wobble persists,
repeat with each blade, noting which one most reduced the wobble. Slide the
clip in small increments away from the center of that blade. Move the clip,
operate the fan, then move it again until you eliminate as much wobble as
possible. Stick the adhesive-backed balancing weight on the top center of the
blade directly in line with the balancing clip.Add more weight if needed to
get a smooth-running fan.
WARNING:
Because of the fan’s natural movement, some connections may become loose.
Check the support connections brackets, and blade attachments twice a year.
Make sure they are secure. It is not necessary to remove the fam from the
ceiling.
Clean your fan periodically to help maintain its new appearance over the
years. Do not use water when cleaning, as this could damage the motor, or the
wood, or possibly cause an electrical shock. Use only a soft brush or lint-
free cloth to avoid scratching the finish. The plating is sealed with a
lacquer to minimize discoloration o tarnishing You can apply a light coat of
furniture polish to the wood for additional protection and enhanced beauty.
Cover small scratches with a light application of shoe polish
The motor has permanently-lubricated sealed ball bearings.
Trouble shooting
Problem|
Solution
---|---
The fan will not start.| o Check the main and branch circuit fuses or
breakers.
o Check the line wire connections to the fan and switch wire connections in
the switch housing.
The fan is noisy.| o Ensure all motor housing screws are snug.
o Ensure the screws that attach the fan blade bracket to the meta’ hub are
tight.
o Ensure the wire nut connebons are not ratting against each other or the
interior wall of the switch housing. o Mows 24-hour ‘breaking in* period. Most
noises associated with a new fan disappear– during this time.
0 If you are using the Cenng Fan light lokensure the screws securing the
glassware are tictit.Check that the light
❑ bulbs are also secure.
o Ensure the canopy is a short distance from the ceiling.tt should not touch
the calling.
o Ensure your outlet box is secure and rubber isolator pads wereused between
the ma-wiling plate and outlet box.
The fan wobbles.| ci Please check and follow the Instructions: ChapItre No.13
Fan balance on page 16.