KUQIBAO K25 Helmet Headset Instruction Manual

: September 6, 2024
: KUQIBAO

Table of Contents

K25 Helmet Headset
Specifications
Product Usage Instructions
Phone Features
Power On/Off
Pairing
Music Features
Voice Assistant/LED Light
- FAQ
Important Notes:
Instruction Warning:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

K25 Helmet Headset

Specifications

Work indicator: Green, Blue
Charging indicator: Red
Power on/off button
Play/Pause button
Next song button
Answer/Hang up button
RGB lighting

Product Usage Instructions

Phone Features

To manually toggle auto answering when Bluetooth is not
connected, double-click the Answer/Hang up button.
To answer an incoming call, short press the Answer/Hang up
button. For auto-answering, wait for 10 seconds.
To refuse an incoming call, press and hold the Answer/Hang up
button for 2 seconds.
To end a call, short press the Answer/Hang up button while on
the call.
To activate the voice assistant, long press the Answer/Hang up
button.
For RGB lighting effects, long press the Voice Assistant button
to switch between lighting effects.

Power On/Off

To power on the device, double-click the Power button to switch
between Chinese and English voice broadcast (when Bluetooth is
disconnected). Press and hold for 3 seconds to turn on.
To power off the device, press and hold the Power button for 3
seconds until the LED light flashes quickly.

Pairing

To pair the device, follow the instructions in the manual. The
LED light goes out when successfully paired.

Music Features

To control music playback, use the Play/Pause button. Short
press to play or pause music.
Use the Volume buttons to adjust volume levels and skip
tracks.

Voice Assistant/LED Light

To wake up the voice assistant when Bluetooth is connected,
short press the Voice Assistant button. Double-click to activate
illumination.

FAQ

Important Notes:

Avoid exposing the product to open flames to prevent
explosions.
Do not disassemble the product to prevent damage to internal
electronics.
Avoid contact with sharp objects that may damage the
product.
Store the product in a dry place when not in use for extended
periods of time.

Instruction Warning:

Reorient or relocate the receiving antenna if experiencing
connectivity issues.
Increase separation between equipment and receiver to improve
signal quality.
Connect the device to a different circuit than the receiver for
stable operation.
Seek assistance from a professional if facing difficulties with
radio/TV reception.

K25 QUICK INSTRUCTION MANUAL

Product overview

Work indicator (green, blue)

Previous song

Charging indicator (red)

Power on/off button Play/Pause button Next song Answer/Hang up button

Phone features
Double-click to toggle manual auto answering (When Bluetooth is not connected)

automatic ( After 10 seconds)

(Incoming call)

Answer

(Incoming call)
Manually answer “short press”

Answer

Press and hold for 2 seconds

(Incoming call) Refusal to answer

“Short press” while on a call

(On a call)

End the call

voice assistant

Long press

(Loop long press to switch lighting effects Finally, you can turn off the light effect, RGB light is
turned off by default every time you turn on)
Voice Assistant button

RGB lighting

List of items
K25Host*1

Speaker microphone*1

Clip-on base*1

Charging Interface

RGB

Speaker/microphone interface

Important Notice: Before installing the headphones, follow the Quick Manual instructions to connect your phone and listen to the sound and volume.If there is a large difference in sound effect and volume after installing it on the helmet, please adjust the position of the speaker in the helmet.

Double-click

Last-code replay

Charging mode

(When the call goes on)

Short press

Cancel outgoing calls

The red light keeps on, when charging

lf you plug in the charger, the device will shut down automatically when the device is turned on
Light goes out after fully charged

Velcro installation package*1

Type-C charging cable*1

Instruction manual*1 Instruction manual

Contact information
Company: Chenzhou Kuqibao Trading Co., Ltd Address: 4/F, Daxia, Hongxing Yiheng, Changchong Industrial Park, Yuxi Town, Yizhang County Chenzhou City, Hunan Province Mobile phone number: 0086-13336483428

Power on/off
Power on
Double-click the button to switch the Chinese and English voice broadcast (Disconnect Bluetooth)

Press and hold for 3 seconds to turn on the device
Power off

Power-on tone

The LED light flashes quickly

Press and hold for 3 seconds to turn off the device
Pairing

Shutdown tone

The LED light goes out

Connection failure, the Bluetooth icon blinks quickly

Bluetooth mode tone
Connection failure, the Bluetooth icon blinks slowly

Music features

(music stops)
Short Press Volume down button

Play

(music playing)

Pause

Volume up button

(music playing)
Turn the previous one clockwise

(music playing)
Long(short)press to reduce the volume

(music playing)

Turn the previous one clockwise

Long(short) press to increase the volume

voice assistant/LED light

Voice Assistant button
(When Bluetooth is connected)

Short Press

Double-click

Wake up voice assistant

Illumination

Notes
1. Do not put the product into the open flame to avoid explosion; 2. Do not disassemble the product. Avoid damage to product electronics; 3. Do not approach the sharp object, the object will cause damage to the product; 4. Do not use for a long time, please place in a dry place.
instruction warning
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmfulinterference to radio communications. However, there is no quarantee that interference wil not occur in a particular installation. ifthis equipment does cause harmful interference to radio or television reception. whichcan be detemined by tuming the equipment offand on, the user is encouraged totry to correct the interference by one or more of the following measures.
-Reorient or relocate the receiving antenna -Increase the separation between the equipment and rereiver. -Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. -Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment. This device complies with Part 15 ofthe FcC Rules. Operation is subject to the following two conditions. (1) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caut i on: Thi s devi ce compl i es wi t h par t 15 of t he FCC Rul es. Oper at i on i s subj ect t o t he f ol l owi ng t wo condi t i ons: ( 1) Thi s devi ce may not cause har mf ul i nt er f er ence, and ( 2) t hi s devi ce must accept any i nt er f er ence r ecei ved, i ncl udi ng i nt er f er ence t hat may cause
undesi r ed oper at i on. Any changes or modi f i cat i ons not expr essl y appr oved by t he par t y r esponsi bl e f or compl i ance coul d voi d t he user ‘ s aut hor i t y t o oper at e t he equi pment . NOTE: Thi s equi pment has been t est ed and f ound t o compl y wi t h t he l i mi t s f or a Cl ass B di gi t al devi ce, pur suant t o Par t 15 of t he FCC Rul es. These l i mi t s ar e desi gned t o pr ovi de r easonabl e pr ot ect i on agai nst har mf ul i nt er f er ence i n a r esi dent i al i nst al l at i on. Thi s equi pment gener at es, uses and can r adi at e r adi o f r equency ener gy and, i f not i nst al l ed and used i n accor dance
wi t h t he i nst r uct i ons, may cause har mf ul i nt er f er ence t o r adi o communi cat i ons. However , t her e i s no guar ant ee t hat i nt er f er ence wi l l not occur i n a par t i cul ar i nst al l at i on. I f t hi s equi pment does cause har mf ul i nt er f er ence t o r adi o or t el evi si on r ecept i on, whi ch can be det er mi ned by t ur ni ng t he equi pment of f and on, t he user i s encour aged t o t r y t o cor r ect t he i nt er f er ence by one or mor e of t he f ol l owi ng measur es: – – Reor i ent or r el ocat e t he r ecei vi ng ant enna. – – I ncr ease t he separ at i on bet ween t he equi pment and r ecei ver . – – Connect t he equi pment i nt o an out l et on a ci r cui t di f f er ent f r om t hat t o whi ch t he r ecei ver i s connect ed. – – Consul t t he deal er or an exper i enced r adi o/ TV t echni ci an f or hel p. The devi ce has been eval uat ed t o meet gener al RF exposur e r equi r ement . The devi ce can be used i n por t abl e exposur e condi t i on wi t hout r est r i ct i on.