Xinxin 2.4G DC Fan Lamp Controller User Manual
- September 6, 2024
- Xinxin
Table of Contents
Xinxin 2.4G DC Fan Lamp Controller
Product Information
Specifications:
- Compliance : Part 15 of FCC Rules
- Radiation Exposure Limits : FCC approved for uncontrolled environment
- Minimum Distance: 0cm between radiator and body
Product Usage Instructions
Safety Precautions:
- Any modifications not approved by the manufacturer may void your device’s warranty.
- Ensure the device is operated in compliance with FCC regulations.
- Maintain the minimum distance of 0cm between the device and your body during operation
Installation:
- Place the device on a stable surface.
- Connect the necessary cables to power up the device.
- Ensure proper ventilation around the device for optimal performance.
Operation:
- Power on the device using the designated switch or button.
- Follow the user manual for specific instructions on using the device’s functionalities.
- In case of any interference, troubleshoot as per the user manual guidelines.
Maintenance:
- Regularly clean the device exterior with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or humidity.
- Refer to the user manual for any specific maintenance requirements.
Product Introduction
This product uses 2.4Gwireless digital remote control technology, remote control one-to-one control, simple and convenient operation, and strong anti- interference ability.
Technical Parameters:
- Model : 2.4G AC fan light controller
- Wall switch sequence : full light/white light/yellow light
- Input voltage : AC1 OOV – 130V 60Hz
- Output voltage : DC70-110V
- LED output power: 25-3 6 W
- Motor rated power: <25W
- Wind speed: 1 – 6 gears
- Timing : 1 hour / 2 hours
- Receiving method: RF2.4G
- Remote control distance: 8-20 meters
- Remote control battery: No. 7 1 .5V X2
Remote control matching code:
Turn on the power and Press and hold the light pairing key within 5 seconds of
the light on,When you hear a beep or a light flashes, the code match is
successful. If you need to match the code a second time, you need to wait 30
seconds before turning on the power and repeat the above operation.
CAUTION:
- The electronic switch is not an isolated product and needs to be operated by professional personnel during installation.
- The electronic switch is triggered by the remote control, and the wireless frequency of the remote control transmitter is 2.4GHz.
APP operation
-
Download the APP scan the QR code – open Enjoy Home in the browser – select the version to download
-
Open the APP—> select a room—> Click on0—> select “fan light”- enter the equipment name (such as fan light)—> OK
-
Click on enter
-
Language (Chinese and English can be selected)
-
Scan (scan the other party’s QR code to share device control)
-
My QR code (you can share it with the other party)
-
Room management (room name can be added)
-
Instructions (Choose the second interface fan light, instructions for using various symbols of the device)
-
Check for updates
-
Feedbackpoint to enter
APP button function description
- Code matching button (click this button within 5 seconds of turning on the light, such as the light source flashing or the buzzer “di”, it proves that the pairing code is successful; if the pairing code fails, repeat this operation).
- After clicking, you can choose a time to turn off the device regularly.
- After clicking, the wind blown by the fan is like the wind in nature.
- The wind-blown by the fan after clicking is suitable for sleep.
- After clicking, the fan will rotate in the reverse direction.
- Click to change the direction of the wind.
- After clicking, the fan will rotate forward.
- After clicking, the white light and yellow light will light up at the same time, but the brightness is only 10% of the maximum brightness.
- After clicking, the white light and yellow light will light up at the same time, and the brightness is the maximum brightness.
- After clicking, only the yellow light will light up, and the brightness is the maximum brightness.
- After clicking, only the white light will light up, and the brightness is the maximum brightness.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the inter erence by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
FAQ
Q: Can I modify the device without voiding the warranty?
A: No, any changes not approved by the manufacturer may void your warranty.
Q: What should I do if I experience interference during operation?
A: Try repositioning the device or adjusting its placement to minimize
interference. If issues persist, refer to the user manual for troubleshooting
steps.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>