VIVITAR CM-ES15-WD Wood Shaped Wireless Mouse User Manual
- September 6, 2024
- Vivitar
Table of Contents
CM-ES15-WD Wood Shaped Wireless Mouse
Wood Shaped Wireless Mouse
Specifications
- Radio Frequency: 2.4 GHz
- DPI: 800-1200-1600
- Power: 1 AA Battery (not Included)
- Compatibility: Mac and Windows devices
- Operating Distance: 10 meters max
- Size: 107 x 58.5 x 26.5 mm
Product Usage Instructions
Inserting the Battery
-
Push the battery compartment cover sideways to reveal the
battery compartment located on the bottom of the mouse. -
Insert 1 AA battery inside the battery compartment, ensuring
correct polarity (+,-). -
Put the battery compartment cover back on the mouse.
Mouse Setup
-
Remove the USB receiver from the storage slot inside the
battery compartment on the bottom of the mouse. -
Insert the USB receiver into a USB port on your computer.
-
Your mouse is now ready to use within a 10-meter operating
distance.
Notes:
-
The mouse will stop working if the receiver is pulled out or
the computer is turned off. -
You can store the USB receiver inside the mouse for portability
when not in use.
FAQs
My Mouse Is Not Working Properly, What Should I Do?
If your mouse is not working properly, please follow these
steps:
-
Ensure both mouse and computer are powered on.
-
Check that the distance between devices is less than 10m.
-
Verify that your computer has suitable drivers for a USB
mouse. -
Confirm batteries are correctly inserted in the mouse.
What Is Covered by Warranty?
The warranty covers products that fail due to defects in
material or workmanship under normal usage. Repairs or replacements
are provided at no charge for parts or labor for one year.
To Obtain Warranty Service and Troubleshooting
Information:
Call 1-877-397-8200 or visit www.sakar.com
125mm
177mm
WOOD SHAPED
Thank you for purchasing the Wood Shaped Wireless Mouse, item CM-ES15-WD. A
2.4GHz USB receiver is included inside of your mous FIRST in order to get the
most out of your mouse.
ITEM: CM-ES15-WD USER’S MANUAL
e. Please read this manual carefully
INSERTING THE BATTERY
In order to operate your mouse successfully, you will need to insert 1 AA
battery (not included). To do so, follow the steps below.
1. Push the battery compartment cover sideways to reveal the battery
compartment. The battery compartment cover is located on the bottom of your
mouse.
MOUSE SETUP
In order to connect your mouse to your computer, follow the steps below:
1. Remove the USB receiver from the storage slot inside the battery
compartment on the bottom of your mouse.
2. Insert the USB receiver into one of your computer’s USB ports.
NOTES
-The mouse will stop working once you pull the receiver out of the USB port or the computer is turned off.
-You can store your mouse’s USB Receiver inside your mouse making it even extra portable and easy to store when not in use.
2. Insert 1 AA battery inside the battery compartment,
3. Make sure that your computer is powered on.
making sure to insert it with the correct polarity (+,-) as
shown on the battery compartment.
3. Once your battery is properly inserted, you can put the battery compartment cover back on your mouse.
BATTERY WARNING:
· Do not mix old and new batteries. · Do not mix alkaline, stand (carbon-zinc)
or
rechargeable (nickle-cadmium) batteries. · Batteries are not to be inserted
with the wrong polarity. · Exhausted batteries are to be removed. · The supply
terminals are not to be short-circuited.
Please recycle or dispose of the battery properly. Contact local recycling
facilities and/or the manufacturer of your battery for further information
2.4 GHz
Open for battery compartment and USB receiver
WOOD SHAPED
ITEM: CM-ES15-WD USER’S MANUAL
FEATURES AND SPECIFICATIONS
Radio Frequency: 2.4 GHz DPI: 800-1200-1600 Power: 1 AA Battery (not Included)
Compatibility: Mac and Windows devices Operating Distance: 10 meters max Size:
107 x 58.5 x 26.5 mm
PACKAGING CONTENTS
Wireless Mouse (with USB receiver) User Manual with Warranty Information
IMPORTANT SAFETY PRECAUTIONS
When using your mouse, basic safety precautions should always be followed,
including the following:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR MOUSE. 2. Never expose your mouse
to high temperatures, extreme cold, high humidity or any moisture or water. 3.
In order to avoid the risk of electric shock, never attempt to open your mouse
or repair it without the assistance of certied professionals. 4. Your mouse is
not to be used by children or the inrm without suitable adult supervision. 5.
Do not use your mouse at temperatures under 32°F (0°C) or over 104°F (40°C).
6. Do not drop your mouse, throw it, or subject it to strong impacts or
physical trauma. 7. If you detect any abnormalities when using your mouse,
contact the manufacturer for support. 8. Keep this manual and all relevant
information for future reference. 9. Clean your mouse using a soft cloth or
paper towel. Do not use harsh chemicals when cleaning your mouse, and never
submerge your mouse in water. 10. Please recycle or dispose of your mouse
properly based on the laws and rules of your municipality. Contact local
recycling facilities and/or the manufacturer of your mouse for further
information.
CAUTION
Risk of Fire and Burns. Do Not Open, Crush, Heat Above 104°F (40°C) or Incinerate. Always Follow All Manufacturer’s Instructions When Using.
TROUBLESHOOTING
If your Mouse is not working properly, please try the following: -Make sure
that both your mouse and your computer are powered on. -Make sure the distance
between the two devices is less than 10m. -Make sure that your computer has
suitable drivers for recognizing a USB mouse. -Make sure the batteries in your
mouse have been inserted correctly.
SAKAR ONE YEAR WARRANTY
This warranty covers the original consumer purchaser only and is not
transferable. This warranty covers products that fail to function properly
UNDER NORMAL USAGE, due to defects in material or workmanship. Your product
will be repaired or replaced at no charge for parts or labor for a period of
one year.
What Is Not Covered by Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unatuhorized parties, tampering, modication or accident.
To Obtain Warranty Service and Troubleshooting Information: Call 1-877-397-8200 or visit our website at www.sakar.com.
To receive warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER
DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH
RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT,
OR REFUND OF THE ORIGINAL PURCHASE PRICE – AT DISTRIBUTOR’S SOLE DISCRETION –
ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS
MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT,
SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO,
DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE
USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER
WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY
AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY
DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation
of incidental or consequential damages or allow limitations on warranties, so
limitation or exclusiomnasy not apply to you. This warranty gives you specic
legal rights, and you may have other rights that vary from state to state or
province to province. Contact your authorized retailer to determine if another
warranty applies.
FCC STATEMENT
Wireless Mouse FCC ID: 2AAPK-WD Mouse Receiver FCC ID: 2AAPK-JUSWMPO22R
Changes or modications not expressly approved by the party res ponsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna. — Increase the separation
between the equipment and receiver. — Connect the equipment into an outlet on
a circuit different from that to which the receiver is
connected. — Consult the dealer or an experienced radio/TV technician for
help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or conjunction with any other antenna or transmitter.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>