REGITAL ACH2AX AC EV Charger User Manual

REGITAL AC EV CHARGER
User’s Manual

ACH2AX AC EV Charger

Safety Warning

1. The personnel who install and use this equipment must observe the following principles and regulations to ensure the personal and equipment safety of relevant personnel: 1. Only qualified authorized electrical professionals with relevant training are responsible for installation, commissioning and maintenance;
2. Before turning on the equipment, please ensure that the equipment is well grounded to avoid personal injury or death caused by electric shock;
3. Do not disassemble the product without permission, and do not modify or install any parts by yourself under any circumstances;
4. When the equipment is installed, please keep away from volatile gas or flammable environment;
5. Before powering on the equipment, please ensure that the input voltage and power frequency meet the technical requirements of the equipment;
6. Children should not approach or use the charging station during the charging process to avoid injury;
7. During the charging process, the vehicle is prohibited from driving and can only be charged when it is stationary;
8. Please turn off the electric car before charging;
9. In case of any abnormal situation during use, please immediately press the side emergency stop switch button to cut off the input and output current source;
10. Before the AC charging station operation, you must carefully read the safety precautions for operation and the operating instructions of the AC charging station;
11.  It is strictly forbidden to use the charging station when the charging gun or the charging cable is defective, cracked, worn, cracked, and the charging cable is exposed. Please contact the staff in time if you find any.
12. If you have any questions, please contact E-mail: waizida@regital-newenergy.com

Thank you for your interest in our product. Our company focus on the charging field of new energy electric vehicles, and is committed to providing excellent charging equipment and complete charging operation solutions for customers and many well-known automobile factories. The electric vehicle charging station developed and produced by our company has advanced functions, stable performance, wide application range and strong practicability, and has a matured charging station construction and operation solution, which has a good reputation in the industry.
Please read this instruction manual carefully before using the product.

PRODUCT PARAMETERS

• CHARGING PILE
  TFT screen Easy installation High compatibility Waterproof grade:IP65 Small size, Easy to transport Multiple security protection Certified by authorities Real-time monitor on temperature

• EV CONNECTOR
  Built in temperature monitoring
  Good conductivity
  PVC CABLE
  Durable and anticorrosion
  Easy to bend, Long service life
  High resistance to cold/ high temperature

• CORE ADVANTAGE
  RCD: CCID20
  Directional current regulation
  Repair the disorder of capacitor units
  Full-link temperature monitoring system
  Strong Expansibility

Transport Package

Protection/Over Current Protection/ Leakage Current
Protection/ Ground Protection/Over Temperature Protection/ Short -circuit Protection/ Lightning Protection
Safety Standard| U12231-1.U12231-1-2.U12594 CSA C22.2#281.22021 Ed.1*U1.U21.13.CSA C22.2#280 FCC Part 15.247&15.249
Certification| In Processing
Warranty| One Year
INSTALLATION| Installing Type| Wall Mount/ Pillar Style
Working Temperature| -20T-50t
Working Humidity| 5%-95%
Dimension| 360/250/115mm
Net Weight| 7.3KG
Gross Weight| 8.7KG
CHARGER GUN| Connection Type| Case 0 Mode 3

PRODUCT CHARACTERISTIC

Temperature Monitoring
Monitor the working temperature of the charger at all times, Once the safe temperature is exceeded, the charger will stop working immediately, and the charging system can be auto-resumed when the temperature returns to normal.
Automatically Repair Faults
Smart chip can automatically repair common charging mistakes to ensure stable opera tion of the production.
Complete Certification
The product has passed all relevant certifications, ensuring that the product can be sold and used with confidence.
APP Control
All the charging parameters could be set and showed on the APP. It will be convenient for operation. Also the charging system will be upgrade through APP.

PROTECTION

| Over Voltage Protection
---|---
| Under Voltage Protection
| Over Load Protection
| Short Circuit Protection
| Earth Leakage Protection
| Over-temp Protection
| Lightning Protection

INSTALLATION INSTRUCTIONS

STEPS FOR WIRING

PLAN A

If a power distribution box is used, the L1, L2, and PE ends of the input cable of the plug correspond to the L1, L2, and PE ends of the circuit breaker respectively.

PLAN B

If the joint is connected, the two ends need to be connected
Note that L1, L2, PE correspond to each other Crimping pliers ensure good contact at extrusion joint.

STEPS FOR USAGE

1. Make sure the charging box is connected power.

2. Connect the EV and the charging box with the EV charging cable.

3. Use swipe card or APP to start.

4. The vehicle is charged normally.

5. Click the APP or swipe the card to end.

6. Unplug the device and wrap the cable around the hook

• NOTE: 1.After the vehicle is fully charged,the device will automatically Stop charging
  2.Please read the instructions carefully before use

ABOUT CUSTOMIZATION

| LOGO in the Display
---|---
| Product Nameplate LOGO
| Colour Custaized
| Packing Box Sticker Customization
| Manual Customization

• NOTE: The above customization has quantity requirements, please confirm with sales staff for details.

FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

https://www.regital-newenergy.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>