HUI PANG H600 Table Tennis Robot User Manual

HUI PANG H600 Table Tennis Robot

Product Information

Specifications

• Type: Portable Device
• RF Exposure: General RF exposure requirement compliant
• Usage: Suitable for portable exposure conditions

Product Usage Instructions:

Safety Precautions
Before using the device, carefully read all safety instructions in the user manual.

Power On/Off
To power on the device, press and hold the power button for 3 seconds. To power off, repeat the same step.

RF Exposure Compliance
Ensure that the device is used in compliance with general RF exposure requirements. Avoid prolonged exposure in close proximity.

Cleaning and Maintenance:
Regularly clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.

Frequently Asked Questions (FAQ)

• Q: Can the device be used in all weather conditions?
  A: The device is designed for indoor use or in dry conditions. Avoid exposing it to extreme weather conditions.

• Q: How often should I recharge the device?
  A: It is recommended to recharge the device when the battery level is low to ensure uninterrupted usage.

HUI PANG SPORTS
H600 Using manual

HUI PANG TABLE TENNIS ROBOT –Light up Your Games

Technical Parameters

• G.W.:9KGS
• N.W.:5.5KGS
• Packing Dimensions:L88W41 H40CM
• Rated Voltage:100-240V
• Rated Power:50W
• Rated Frequency:50/60HZ
• Can serve 9 kinds of spin balls+ 1 kind of non-spin balls
• Can be up and down to adjust the angle of serving ball
• Can be left and right to adjust the angle of serving ball Comes with ball-recycling system
• Spin:non-spin, Topspin,backspin,left and right spin,
• left and right sidespin
• Serving Frequency:30-90/min
• Serving speed :4-40m/s
• Point of fall:Fixed point/Random
• Operation method:2.4G wireless romote control Colour:Black

Standard Accessories

• A.Table tennis robot
• B.Remote control
• C.Power D.Post set *2
• E. Two serving wheels (spare parts)
• F. Small clip: a small fixed piece between the recovery trough and the ball collecting net to prevent leaking balls(2-3 holes install one Small clip to avoid leaking balls ,not need to completely install)
• G. Measuring tool: test whether the table tennis balls is standard 40+

Installation steps

Functional Instructions

1. Serve strength
2. Serving frequency
3. Oscillation
4. No spin, topspin, underspin and sidespin
5. Fixed point
6. Long-short ball(one jump two jump)
7. One button turn to up topspin
8. One button turn to under spin
9. Directly ball( non-spin)
10. lrregular
11. Unload the ball

Fixed point
Press the Oscillation speed buttom on the remote control,When the robot head is turned to the desired position, close the Oscillation speed button and the value is O that’s ok.

Long-short ball (one jump two jump)
loosen the copper knob, adjust the elevation of the robot head and tighten (please don’t take it down, adjust it and tighten it), can make one jump balls (serve directly) or two jump balls (serve indirectly).

One button upspin
one button quickly turn to the topspin

One button underspin
one button quickly turn to the underspin

Directly ball (non-spin)
one button quickly turn to non spin

lrregular
The ball from the table tennis robot suddenly left or right, near or far

Unload the ball
you don’t want to play table tennis robot for sometimes, you can unload the ball

1. serve strength

2. serving frequency

3. Oscillation

4. no spin, topspin, underspin and sidespin

5. fixed point

6. long-short ball(one jump two jump)

7. one button turn to up topspin

8. one button turn to under spin

9. directly ball( non-spin)

10. irregular

11. unload the ball

12. Serve strength: Press remote control top spin and bottom spin are simultaneously up to increase the serve strength.Press remote control top spin and bottom spin are simultaneously down to decrease the serve strength.

13. Serving frequency: adjust the serving speed, that is the number of balls from the robot serve. The higher the frequency is, the number of balls is more and faster

14. Oscillation:adjust the left and right Oscillation speed of the robot head,the higher the number, the faster left and right Oscillation speed. Number O is fixed point

15. No spin, topspin, underspin and sidespin:top and bottom wheel setting the same number is non spin when top wheel speed is much higher than bottom wheel speed, the serve ball is top spin. when top wheel speed much lower than bottom wheel speed,the serve ball is under spin.

• when topspin , you turn left ,is left spin
• when topspin, you turn right 45 degrees , is right sidespin. the up and down spin can be adjusted by the remote control;
• when topspin , you turn right ,is right spin
• when topspin, you turn left 45 degrees, is left sidespin.
• the left and right spin needs to adjust robot head by yourself.

Remote control instruction

• One button topspin
• One button underspin
• direct service (non-spin)
• irregular service

Functional Instructions

Server Type Drawing

• Serve type :Can serve ball directly and indirectly
• Indirect type:With a proper speed and spin ,it is much more suitable for beginner to practice different skill of serving and returning ball
• Direct type:Compared with indirect type, it is much stronger on its speed and spin. At a proper speed and spin,it can give loop. smash and lob etc.It is suitable for daily practice  loosen the copper knob, adjust the elevation of the robot head and tighten(please don’t take it down, adjust it and tighten it)
• Don’t adjust when the table tennis robot is working.

Manually adjust the table tennis robot head to the angle you need

• when topspin
• you turn left 90 degrees.is left spin
• you turn right 90 degrees.is right spin
• you turn left 45 degrees, is left sidespin.
• you turn right 45 degrees, is right sidespin.

Troubleshooting

• Please use the standard 40MM or 40+ balls. You can choose HUIPANG balls or other more than one star balls. Please don’t use the balls that are too soft or irregular to avoid clamping balls.
• Please clean the balls with clear water and dry them before you use them. And clean the balls and the ball groove regularly to keep robot clean and reduce the failure.
• Remove balls when it is clamp,then cleck parts of sending balls and clean ball groove.
• If you don’t use robot for a long time, please clean it up and with good storage bag.

Spare parts replacement

In the case that the serving ball wheel is damaged or out of shape.might you need to exchange the wheel.

1. Check which serving ball wheel is damaged. Then remove the cover on both sides of the table tennis robot head and replace it.
2. If it is necessary to replace up serving ball wheel, use a screwdriver to remove the screw.
3. Disassemble the screw from the serving wheel.take out the damaged wheel.
4. Take a new wheel,and put it inside follow the process before.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition, compliance with exposure requirements.

HUI PANG SPORTS
Address: N0.169 Jinxing street,Guihu town,Chaozhou,GD province Phone: +86-768-6754188
Email: huipang22@126.com
Web: www.huipong.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>