FITUEYES S02M1221N Floor Tv Stand Installation Guide
- September 3, 2024
- FITUEYES
Table of Contents
FITUEYES S02M1221N Floor Tv Stand
Product Specifications
- Model: FT48
- Part Numbers: S02M1221N, S02M1222B, S02M1223A
- Package Contents:
- A x4
- B x2
- C x4
- D x1
- E x1
- F x1
- Screw Sizes:
- M8x20
- M6x6
- M6x12
- Dimensions:
- Length: 72mm
- Width: 5-6mm
Product Usage Instructions
Step 1: Assembly
- Distinguish the front of the product using the provided guide.
- Start by attaching components A, B, and C as indicated in the manual.
- Use the specified screws for each component:
- A x4 – M8x20
- B x2 – M6x6
- C x4 – M6x12
Step 2: Finalize Installation
- Proceed to attach component D using the provided screw size.
- Secure component E with the appropriate screw size.
- Complete the assembly by attaching component F.
Important Note:
Do not tighten the screws excessively to avoid damaging the product. Refer to the manual’s warnings before proceeding.
Frequently Asked Questions
Q: How should I move the brake on the product?
A: To move the brake, follow the instructions outlined in the manual’s “Move Brake” section. Ensure to handle with care to prevent any damage.
What’s in the box
Accessories for installing TV
Easy to install
Select appropriate screws from M-A to M-G and install part #2B on the four screw holes on the back of the TV. The back of the TV is flat, and the A1 installation method without gasket can be used; If the back is uneven, A2 installation method with washers (M-H to M-J) can be used, and thick washers can be superimposed according to the situation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>