ERKUL 2005-2013 Roof Side Rails Rack and Cross Bar Instruction Manual
- September 3, 2024
- ERKUL
Table of Contents
ERKUL 2005-2013 Roof Side Rails Rack and Cross Bar
Specifications
Component | Quantity | Image Description |
---|---|---|
Yellow Gasket | 2 | Yellow rectangular gasket |
Allen Key | 1 | Black Allen key with a handle |
Plastic Cap | 6 | Black plastic cap |
Washer | 6 | Silver washer |
M6x60 Screw | 6 | Silver screw for front, rear, and middle |
Instructions
Follow these steps to install the Skyport Roof Rail on your Range Rover Sport (2005-2013):
- Identify the mounting points on the roof of your vehicle. There are three points: rear, middle, and front.
- Place the yellow gaskets (2 pieces) on the mounting points to ensure a secure fit.
- Use the provided Allen key to secure the M6x60 screws (6 pieces) into the mounting points. Ensure that the screws are properly tightened.
- Place the plastic caps (6 pieces) over the screws to cover them.
- Check the stability of the roof rail to ensure it is securely attached.
Diagram
The following diagram shows the placement of the roof rail on the vehicle:
- Rear: Shows the rear mounting point with the screw and cap in place.
- Middle: Shows the middle mounting point with the screw and cap in place.
- Front: Shows the front mounting point with the screw and cap in place.
FAQ
- What tools are needed for installation?
- The Allen key provided in the kit is the only tool required for installation.
- How many screws are included in the kit?
- There are 6 M6x60 screws included in the kit.
- Are the gaskets necessary for installation?
- Yes, the yellow gaskets ensure a secure fit and prevent damage to the vehicle’s roof.
- Can I install the roof rail by myself?
- Yes, the installation process is straightforward and can be done by one person.
PARTS AND TOOLS
RANGE ROVER SPORT 2005-2013 SKYPORT ROOF RAIL
INSTALLATION INSTRUCTION
INFORMATION CONTACT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>