ERKUL FM183 5.2 Running Boards Instruction Manual
- September 3, 2024
- ERKUL
Table of Contents
ERKUL FM183 5.2 Running Boards
Specifications
- Product: Hyundai Tucson 2020 Running Board
- Components: A, B, C, D, Front Bracket D, Middle Bracket, Rear Bracket D
- Hardware: M8 screws (x12), M10 screws (x16)
Product Usage Instructions
Installation Steps:
-
Begin by identifying the specific location for each component based on the provided labels.
-
Attach A and D components together to form the front right section.
-
Secure B component to create the middle right section.
-
Combine C and D components to assemble the rear right section.
-
Install the front bracket D followed by the middle bracket and rear bracket D.
-
Attach A to the front bracket, B to the middle bracket, and C to the rear bracket.
-
FRONT BRACKET
-
MIDDLE BRACKET
-
REAR BRACKET
Hardware Installation:
- Use M8 screws for securing A and D components.
- Utilize M10 screws for attaching B and C components to their respective brackets.
Frequently Asked Questions
Q: How do I ensure proper alignment during installation?
A: To guarantee correct alignment, carefully match the labels on each component with their designated positions.
Q: Can these running boards be installed on other vehicle models?
A: The Hyundai Tucson 2020 running boards are specifically designed for that model and may not be compatible with other vehicles.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>