nord V2 Piano Monitor System Active Stereo Speakers User Guide
- August 31, 2024
- nord
Table of Contents
nord V2 Piano Monitor System Active Stereo Speakers
Product Usage Instructions
- Making Connections:
- Connect the power cord between the LEFT SPEAKER and a power supply. Secure the power cord with the adjacent metal hook.
- Connect the 1/4 stereo audio cable between your Nord instrument and the LEFT IN and RIGHT IN jacks on the LEFT SPEAKER. Use the appropriate cable length for your setup.
- Connect the single 1/4 cable from the Left SPEAKER OUT jack to the Right SPEAKER IN input.
- Ensure the Nord instrument is powered on and then turn on the Nord Piano Monitor system using its POWER ON/OFF switch.
- Auxiliary Inputs and Outputs:
- The AUX IN jack allows you to connect additional sound sources like smartphones or tablets. Adjust the sound level using the AUX VOLUME knob. For connecting a subwoofer, use the RCA full range SUB OUT jack with a suitable subwoofer with a crossover frequency of 50 Hz.
- Auto Standby Feature:
- Enable AUTO STANDBY to automatically switch to standby mode after one hour of no input signal. The system will reactivate when a signal is detected.
- Monitor Brackets:
- Use the included brackets for optimal placement of the Nord Piano Monitor pair. Attach them using the provided parts for mounting on stands or surfaces.
FAQs
- Q: Can I use the Nord Piano Monitor speakers with any Nord instrument?
- A: Yes, the Nord Piano Monitor speakers are compatible with all Nord instruments.
- Q: How do I adjust the volume level on the Nord Piano Monitor system?
- A: The volume level for the system is set using the MASTER LEVEL control on your Nord instrument.
- Q: What should I do if the system enters standby mode but I want to reactivate it?
- A: Simply play a signal through your connected device again, and the system will automatically reactivate from standby mode.
PRODUCT INFORMATION
THANK YOU!
- Thank you for purchasing the Nord Piano Monitor speakers!
- Designed in Sweden and compatible with all Nord instruments the Nord Piano Monitor is specifically engineered for optimal reproduction of the acoustic and electric pianos in the Nord Piano Library.
MAKING CONNECTIONS
- Connect the power cord between the LEFT SPEAKER and a power supply. Secure the power cord with the adjacent metal hook.
- Connect the 1/4” stereo audio cable between your Nord instrument and the LEFT IN and RIGHT IN jacks on the LEFT SPEAKER.
- There are two stereo audio cables of different lengths included in the box. Use the one that best suits your set-up.
- Connect the single 1/4” cable from the Left SPEAKER OUT jack to the Right SPEAKER IN input.
- The Speaker Out output delivers a high voltage signal, and connections should only be made according to these instructions.
- Make sure the Nord instrument is switched on and then turn on the Nord Piano Monitor system using its POWER ON/OFF switch.
- The volume level for the system is set by the MASTER LEVEL control on the Nord instrument.
AUX IN
- The 1/8” AUX IN jack can be used for connecting an additional sound source, such as a smartphone, tablet, or computer, to the Nord Piano Monitor system. The sound level of the Aux signal is set with the AUX VOLUME knob.
SUB OUT
- The RCA full range SUB OUT jack is intended for attaching a suitable subwoofer with a built-in crossover filter, such as the Audio Pro SW-10, to the Nord Piano Monitor system. For optimal performance, the crossover frequency should be set to 50 Hz.
AUTO STANDBY
- With AUTO STANDBY set to On, the system enters standby mode after one hour if no input signal is being received. The system is activated automatically when the signal is received again.
MONITOR BRACKETS
The included brackets are designed for optimal placement of the Nord Piano Monitor pair and are attached to the instrument according to the figure below. The following parts are included in the box, and should be used to properly mount the brackets to the instrument and speakers:
- 2 x monitor brackets
- 4 x protective rubber pads (corresponding to steps A and B in the figure below)
- 6 x star screws
- The Nord Piano Monitor brackets can be fitted to the Nord Grand 2, Nord Grand, Nord Piano 5,
- Nord Piano 4, Nord Stage 4 and Nord Stage 3 Revision B (on Nord Stage 3 Revision B instruments the text “Rev B” is written in vertical fine print next to the Reverb unit).
- The Nord Piano Monitor brackets can also be fitted to standard – 5/8” thread size – microphone stands, using the threaded hole at the bottom of the bracket.
SPECIFICATIONS
- Dimensions: H x W x D, 220 x 150 x 198 mm
- Weight: 5.5 kg/pair
- Woofer size: 4.5 inch
- Tweeter size: 3/4 inch
- Power consumption ON mode: 6 W
- Power consumption Standby mode: 0.4 W
- Mounting screws short, dimensions: M6 x D38 x 37, 2 pcs (black star plastic + stud)
- Mounting screws long, dimensions: M6 x D38 x 54.5, 4 pcs (black star plastic + stud)
WARNING: Risk of electric shock Do not open
- The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Operating temperature (˚C) 5–45 Humidity (%) no condensation 30–90
- Do not block any ventilation openings. Install by the manufacturer’s instructions.
- Minimum distances around the apparatus for sufficient ventilation, 10cm.
- The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- A. When the power supply cord or plug is damaged
- B. If liquid has been spilled, or objects have fallen into the apparatus,
- C. If the apparatus has been exposed to rain or water,
- D. If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,
- E. If the apparatus has been dropped or damaged in any way, and
- F. When the apparatus exhibits a distinct change in performance this indicates a need for service.
- Object and Liquid Entry Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus. No naked flame sources such as lighted candles etc., should ever be placed on the apparatus.
- The power supply and power cord for this apparatus are intended for indoor use only.
- The mains plug/appliance coupler/direct plug-in adapter is used as a disconnect device, the disconnect device shall remain readily operable.
INFORMATION ON DISPOSAL FOR USERS
- This electronic device must be recycled or discarded according to applicable local and national regulations.
- The symbol shown, applied to the product or on its packing, indicates that, at the end of life, the product is not to be thrown away, or disposed of as unsorted municipal waste, but separately collected.
- Clavia DMI AB encourages owners of Nord musical instruments to responsibly recycle their equipment when they are no longer needed.
- Disposing of this product correctly will prevent potential negative effects on the environment and human health which could arise due to inappropriate waste handling.
INFORMATION ON RECYCLING OF PACKAGING MATERIALS
- Outer box and internal cardboard protection should be recycled as paper.
- Internal plastic foam protection and plastic bags should be recycled as plastics.
FCC
FCC Information (U.S.A)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
CONTACT INFORMATION
- Model Name: Nord Piano Monitor
- Responsible Party: Clavia DMI AB
- Address: P.O. BOX 4214. SE-102 65 Stockholm, Sweden
- Telephone: +46-8-442 73 60
- Version 2.1x
- Edition: E
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>