BYRNE BE010566 Locating Device User Manual

August 31, 2024
BYRNE

BYRNE BE010566 Locating Device

Product Information

Specifications:

  • Total Available Power: 21.6V DC, 10,000mAH, 216WH
  • Charging Input: 100W USB-C / Charging
  • Connections: 3 USB-C, 1 USB-A

Product Usage Instructions

General Use:

  1. Plug devices into the proper port. Use the 3 USB-C connections or 1 USB-A connection as needed.
  2. Charge Thesis by connecting a 100W PD Type C power supply to the indicated Type C Port.
  3. Do not stack more than 5 units of Thesis for safety reasons.

Charging Guidance:

For optimal performance, charge Thesis when the battery level drops to 25%.

If the battery is discharged below its rating, recharge it before use to ensure proper functionality.

Cooling and Ventilation:

Thesis may become warm during use. Ensure proper ventilation by keeping air vents free from debris or obstructions. Do not cover Thesis with materials like blankets or pillows during operation.

LED Battery Display:
The LED lights indicate the charge level while charging. Each light represents 25% of the battery capacity, with all 4 lights on when the battery is fully charged.

Mounts and Accessories:

Use only approved Byrne Mounts and Accessories with Thesis.
Follow the instructions provided with each accessory for proper usage.

PACKAGE INCLUDES

OPERATING INSTRUCTIONS

Please read all the instructions before using Thesis.

GENERAL USE
Plug devices into the proper port. There are 3 USB-C connections, 1 USB-A connection. Thesis can be charged by plugging a 100W PD Type C power supply into the indicated
Type C Port. *Not to be stacked with more that 5 units.

For best results, charge Thesis when the level drops to 25%.
If the battery is discharged below its rating, the unit will not function correctly. Recharge the battery before using.
Thesis may become warm during use. An internal fan may activate to cool Thesis when in use. Keep the air vents free from debris or obstructions. Always allow adequate ventilation around Thesis. Do not place Thesis under a blanket, pillow, or body when in use.

THESIS CAPACITIES

TOTAL AVAILABLE POWER
21.6V DC, 10,000mAH, 216WH

CHARGING YOUR THESIS®

INITIAL CHARGE
The Thesis® is shipped with a 25% charge level. For the best results, charge the battery completely before use.

DEAD TO FULL CHARGE TIME
Thesis will charge fully in 5-6 hours.

CHARGER SPECS

  • 100W PD Type C, 20V at 5A
  • Wireless Charger, 9V at 1.67A

LED BATTERY DISPLAY

WHAT DO LEDs INDICATE?
While charging, the LEDs will cycle through the lights to indicate the level of the charge. Starting with 1 and stopping at the charge level. Each light in the cycle accounting for 25% of the fully charged battery.

All 4 lights will remain on when the battery has reached 100% charge level.

MOUNTS AND ACCESSORIES

Thesis should only be used with approved Byrne Mounts and Accessories.
Read and follow all instructions provided with each accessory.

LOCATING DEVICE

Thesis contains a cavity for the storage of a locating device.
Fold back the bottom pad to access the cavity. A magnetic disc secures the pad in one corner. Only fold the pad back at this corner. Do not remove the pad from the adhesive.

Read and follow all of the locating device manufacturer’s instructions and recommendations.

CARE, STORAGE, AND TRANSPORTATION

  • Do not subject Thesis to mechanical shock, crushing or cutting. Misuse, dropping or excessive force may damage Thesis.
  • Do not clean Thesis with harmful chemicals or detergents.
  • Store Thesis in a cool dry place. Do not store Thesis in a hot or humid environment.
  • Do not store Thesis near fire or in high temperatures such as in direct sunlight or in a vehicle.
  • Refer to the current IATA restrictions before attempting to bring Thesis on an airplane.

DISPOSAL INSTRUCTIONS
Thesis contains Lithium-ion batteries and should not go in household garbage or recycling bins.
Do not dispose of Thesis in heat or fire.
Thesis should be taken to separate recycling or household hazardous waste collection points that accept Lithium-ion batteries.

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using this product, basic precautions should always be followed, including the following:

  • Read all instructions before using Thesis.

  • To reduce the risk of injury, close supervision is necessary whenThesis is used near children.

  • Do not put fingers or hands into Thesis.

  • Use of an attachment not recommended or sold by Byrne may result in the risk of fire, electric shock, or injury to persons.

  • To reduce risk of damage to the electric plug and cord,pull the plug rather than the cord when disconnecting Thesis.

  • Do not use Thesis if it is damaged or modified.
    Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

  • Do not operate Thesis with a damaged cord or plug.

  • Do not expose Thesis to fire or excessive temperature.
    Exposure to fire or temperatures above 265°F may cause explosion.

  • There are no user-serviceable parts inside. Do not disassemble Thesis. Contact Byrne for service options.

  • Do not store or operate at temperatures below 40°F or above 90°F.

  • Do not cover or block ventilation slots.

  • Do not stack more than 5 units

SAVE THESE INSTRUCTIONS

WARNING – For indoor use only. Do not use outdoors.

FAQ (Frequently Asked Questions):

Q: Can I charge Thesis with any USB-C power supply?
A: It is recommended to use a 100W PD Type C power supply to charge Thesis for optimal performance.

Q: How should I store Thesis when not in use?
A: Store Thesis in a cool, dry place away from heat, humidity,fire, or direct sunlight. Refer to IATA restrictions if planning to travel with Thesis.

Q: What should I do with Thesis when I no longer need it?
A: Do not dispose of Thesis in household garbage or recycling bins. Take it to separate recycling or hazardous waste collection points that accept Lithium-ion batteries for proper disposal.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The prototype magnet is just to fix the position, more convenient charging.

320 Byrne Industrial Drive, Rockford, MI 49341
IS010668 © 2024 Byrne Electrical Specialists, Inc. All Rights Reserved

www.byrne.com
P 800.999.3567

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals