EUROPRO Eurospray XL Piston Pump User Manual
- August 29, 2024
- EUROPRO
Table of Contents
Eurospray XL Piston Pump
“`html
Product Information
Manufacturer
Europe Projection
228, avenue Olivier Perroy 13790 ROUSSET
Product Name
Eurospray XL
Edition
08/02/2024
Website
More information on www.euromair.com
Specifications
- Manufacturer: Europe Projection
- Model: Eurospray XL
- Edition: 08/02/2024
Product Usage Instructions
1. Importance of the Manual
This manual is essential for the proper use of your machine. It
includes instructions for starting up, cleaning, maintenance, and
safety precautions. Failure to follow these instructions may lead
to accidents.
2. Receivers of the Manual
This manual is for anyone handling the machine, including those
responsible for transport, operation, cleaning, maintenance, and
disposal of the machine.
3. Warning – Safety
Using the machine incorrectly or not following the safety
instructions can result in death or serious injuries.
FAQ
Q: Where can I get a copy of the manual if mine is lost or
damaged?
A: You can request a copy of the manual from the machine
manufacturer mentioned on page 4 at any time.
“`
User manual
Eurospray XL
Réf. 51300
EUROPE PROJECTION – 228, avenue Olivier Perroy 13790 ROUSSET – Tél : +33 (0)4
42 29 08 96 SAS au capital de 400 000 – RCS Aix-en-Provence B 394 961 510 –
NAF 2892 Z – Intracom : FR 54 394 961 510
Edition of 08/02/2024
More information on www.euromair.com
You just acquired one of our machines and all the team of Europe Projection thanks you for the confidence you have granted us.
Manufacturer
of
professional equipments
for paint and fillers, we
have put our know-how for
30 years at the service of
the users of our machines.
Our technical & commercial team is at your disposal for any further information you may need about the machine you just acquired.
EUROPE PROJECTION
228, avenue Olivier Perroy 13790 ROUSSET
Tél : +33 (0)4 42 29 08 96 contact@euromair.com
SUMMARY
1. USER MANUAL………………………………………………………. p. 3 1.1. Importance of the manual
……………………………………..p. 3 1.2. Receivers of the manual ……………………………………….p. 3
2. WARNING ………………………………………………………………. p. 4 2.1. Safety
…………………………………………………………………p. 4 2.2. Electric connection ……………………………………………….p. 6
2.3. End-of-life of the product ……………………………………….p. 6
3. YOUR MACHINE …………………………………………………….. p. 7 3.1. Description
………………………………………………………….p. 7 3.2. Technical characteristics ……………………………………….p.
7 3.3. Identification of the components …………………………….p. 8
4. USE OF THE MACHINE ……………………………………………p.11 4.1. Prerequisites
……………………………………………………….p.11 4.2. Preparing the work area………………………………………..p.11
4.3. Preparing the machine ………………………………………….p.12 4.4. Preparing the product to
be sprayed ……………………….p.13 4.5. Starting up …………………………………………………………..p.14 4.6.
Spraying technique ………………………………………………p.15 4.7. Unclogging the tip
………………………………………………..p.17 4.8. Stopping work ……………………………………………………..p.17
5. MAINTENANCE………………………………………………………. p.18 5.1. Cleaning procedure
………………………………………………p.18 5.2. Defects and remedies …………………………………………..p.19 5.3.
Error codes………………………………………………………….p.20
6. DECLARATION OF CONFORMITY………………………….. p.21
7. WARRANTY CONDITIONS ……………………………………… p.22
P2 User manual – Eurospray XL
202402-672-ENG
1. USER MANUAL
1.1. IMPORTANCE OF THE MANUAL
This manual is a key part for the use of your machine. It summarizes the
procedures of starting-up, cleaning and maintenance of the device and also the
safety instructions you need to observe.
Read carefully all the working and safety instructions and the warnings
included in this manual before starting your machine. Most of the accidents
are caused by the non-compliance of the safety standards and rules.
This manual must be kept near the machine, within reach of the user and held
in good condition until the final destruction of the machine. In case of loss
or deterioration of the manual, you can ask the machine manufacturer mentioned
on page 4 for a copy at any moment.
1.2. RECEIVERS OF THE MANUAL
This manual is intended to any staff which will manipulate the machine : –
people in charge of the transport of the machine – people in charge of the use
of the machine – people in charge of the cleaning and maintenance of the
machine – people in charge of the final destruction of the machine
202402-672-ENG
User manual – Eurospray XL P3
2. WARNING
2.1. SAFETY
Using the machine in an incorrect way or in non-compliance of the safety
instructions indicated in this manual can cause death or serious injuries.
Read carefully all the working and safety instructions and the warnings
contained in this manual before starting your machine.
· Respect all the safety standards before running the equipment. · Use the equipment only for the applications specified in the manual. · Always remain alert when using the equipment. · Transport the machine using the handles or the appropriate grips. · During the breaks, disconnect electrically the machine.
· Run the equipment to its nominal voltage. · Let at least 50 cm of free space
between the equipment and any obstacle so that the air
flow is not blocked. · Know how to quickly stop the equipment in case of
necessity. · Never use the equipment while it is running abnormally or it is
defective. · Do not direct a water jet or flammable liquid on the machine. ·
Never direct an air jet or product jet on a person or an animal. · Do not
touch warm surfaces of the equipment. · Never touch moving parts. · Do not
insert any object or the hands inside the protection grids to avoid any
accident or
damage to the machine. · For any outside job, only use appropriate extension
cords.
· Always wear adequate body protections (glasses, gloves, overall and mask) and pay attention to long hair.
· Maintain the equipment carefully and clean it properly after every use. ·
Disconnect the equipment before any intervention. · Avoid absolutely to
unscrew any connection while the machine is under pressure. · Check the
damaged parts. · Do not clean the plastic parts with solvant. · In case of
damage of the electric cable or the plug, do not run the machine and contact a
licensed After-Sale Service to put genuine parts instead of the defective
ones. · In case of needed After-Sale Service, always specify the machine model
and its serial
number. · For any replacement of parts, only use genuine parts.
· Do not modify the machine. · Do not cut or dismantle the protection grids. ·
Do not open the electric box.
P4 User manual – Eurospray XL
202402-672-ENG
2. WARNING
2.1. SAFETY
WORKSPACE · Maintain the workspace clean and clear. · Ambient operating
temperature must be from 5°C and 35°C. · Do not use the equipment in a
potentially explosive area. · Do not place any potentially inflammable objects
in close proximity to the machine. · Take away every not qualified person from
the working area of the machine, as well as children
and animals. · In case of installation of the machine on scaffolding or a plan
above ground level, attach the machine
to avoid any fall while operating. · Do not install the equipment on an
inclined surface to avoid the risks of unexpected moves or falls.
HOSES · Always use hoses and connections adapted to the used product (genuine
parts), do not try to fix it. · Do not walk on the hoses, do not bend them. ·
Do not use the hoses to pull the machine.
STORAGE · Keep the equipment in a clean and clear area in which the
temperature does not exceed +35°C. · After every use, necessarily grease the
pump with a mixture of water + storage liquid to avoid it
blocking up. The storage of a not greased pump can damage it seriously.
IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL
MODIFICATION WITHOUT ADVANCED NOTICE.
202402-672-ENG
User manual – Eurospray XL P5
2. WARNING (continued)
2.2. ELECTRIC CONNECTION
The electric connection of the machine must be on a 16A – 230V plug with a
differential circuit breaker.
Before any intervention on the machine, make sure that every energy supply is
cut (air and electricity).
GROUND CONNECTOR All the machines must be connected to the ground when they
work to protect the operator from electric shocks. Our machines are all
equipped with standardized connection plugs.
Electric connection must be made by a qualified technician. It is fobidden to
modify or dismantle the machine, especially the electric box. Repairs must be
made by an authorized center or our After-sale Service. During any
intervention on the machine, make sure that the ground is well reconnected.
EXTENSION CORDS During the use of an extension cord, make sure that it is not
crushed or damaged and that it contains a ground. Check that the section of
the used extension cord is sufficient to support the machine when it is
working. A too thin extension cord can cause voltage drops or overheating of
the machine.
In case of use of a cable reel, it is imperative to unwind it entirely,
otherwise, the equipment can be damaged. The section must be proportional to
the length of the cord.
2.3. END OF LIFE OF THE PRODUCT
At its end-of-life, the machine must not be eliminated with the other
household waste. The uncontrolled elimination of waste can harm the
environment or human health. Individuals are invited to contact the
distributor which sold them the product or to inquire with their city hall to
know where and how to get rid of the product so it can be recycled while
respecting the environment.
Under the regulation of Waste of Electrical and Electronic Equipments (WEEE),
we undertake to process the used EEEs according to the following provisions:
applicable only to products on the market since 08/13/05, under the brands
EUROPE PROJECTION or VOLUMAIR, products of other brands sold by our company
(upon presentation of the corresponding invoices), products that operate using
electrical energy (for example, thermal washers or compressors do not fall
into this category).
Treatment modality WEEE returns collected by our clients/distributors at their
own expense to our collection points in Antony (92) or Rousset sur Arc (13).
Upon receipt, the products are sorted by our employees and directed to the
most appropriate processing channels.
For any further information, please contact our hotline +33 4 42 29 08 96 or
conseil@euromair.com.
P6 User manual – Eurospray XL
202402-672-ENG
3. YOUR MACHINE
3.1. DESCRIPTION
Powerful, ergonomic airless sprayer designed for applying paint and ready-to-
use film plasters on large worksites.
Its large-diameter wheels make it easy to transport and handle. The
retractable arm makes it easy to roll up the hose.
It’s very practical on site: quick-release pump, tilting stand, carrying
handles, accessible controls, etc.
APPLICATIONS Water-based or solvent-based paints: lacquers, woodstains,
varnishes, primers, ceiling mattes, disinfectants, enamels, wood treatment,
etc. Ready-to-use film-plasters.
Do not use abrasive products, acids, alkalis, combustible products, facade
paints, etc.
3.2. TECHNICAL CHARACTERISTICS
Max. working pressure Max. product flow rate Power Supply Max tip (new)
Dimensions (L x w x h) Weight
Delivered with
220 bar
6,5 L/min
3 kW
230 V / 50-60 Hz
0,039″
68 x 61 x 85 cm
56 kg – a Ø3/8″ x 15 m hose, 250 bar – a CoatSpray gun with tip holder – a 417
standard tip – a 100 mL bottle of oil for piston pump – a case containing :
· a Ø3 Allen key · a 17/19 open-end spanner · a 19/22 open-end spanner
202402-672-ENG
User manual – Eurospray XL P7
3. YOUR MACHINE (continued)
3.3. IDENTIFICATION OF THE COMPONENTS (continued)
F A
B2
B1
R
G
I
JK J
A On/off switch B Potentiometer B Display selection button C Product suction
rod D Return hose E Power cable F Product outlet connector G By-pass valve H
Pump filter I Pump lubrication slot J Pump removal nuts K Bucket support
P8 User manual – Eurospray XL
E
C
D
202402-672-ENG
3. YOUR MACHINE (continued)
3.3. IDENTIFICATION OF THE COMPONENTS (continued)
COATSPRAY SPRAY-GUN
R
TS M
P
Q
L Trigger M Trigger locking pin N Product intlet connector P Trigger
protection Q Tip support R Tip S Tip gasket T Tip seat
202402-672-ENG
N L
User manual – Eurospray XL P9
3. YOUR MACHINE (continued)
3.3. IDENTIFICATION OF THE COMPONENTS (continued)
PAINTSPRAY SPRAY-GUN (OPTIONAL)
TS R Q
P
M L
O
L Trigger M Trigger locking pin N Product intlet connector O Grip filter P
Trigger protection Q Tip support R Tip S Tip gasket T Tip seat
P10 User manual – Eurospray XL
N
202402-672-ENG
4. USE OF THE MACHINE
4.1. PREREQUISITES
· The electric connection has to be 230 V – 16 A – 50 or 60 Hz with a 3 x 2,5
mm² cable reel of 40m maximum, completely unreeled.
THERMAL PROTECTION · The machine is equipped with a thermal protection which
stops the motor in the event of overheating.
If this happens, the display on the housing will show an error code (see 5.3.
Error codes).
TOOLS REQUIRED FOR USE · A mallet. · An empty receptacle. · A large piece of cardboard. · Masking kit (protective film + adhesive).
DISPLAY · By default, the display on the machine housing shows the working
pressure in bar. Press the
SELECT button to obtain further information:
Default
Pressure (in bar)
1st press
Pressure (in psi)
2nd press
Operating time (in hours)
3rd press
Motor temperature
(in °C)
4th press
5th press
Last error code Return to default
recorded
display
4.2. PREPARING THE WORK AREA
· When spraying, a mist may form. Use the masking material to cover all the
areas and objects to be protected or remove them from the spraying area if
possible (door and window frames, furniture and objects, electrical sockets
and switches, etc.).
Any penetration of the sprayed product into an electrical socket or switch
could lead to an electric shock which could cause serious injury and/or
damage.
If a product containing silica is used, ensure that glass or ceramic surfaces that could be damaged by such a product are properly masked.
Avoid using masking tape that is too strong on sensitive areas (wallpaper, painted surfaces) to avoid damaging them when the tape is removed.
202402-672-ENG
User manual – Eurospray XL P11
4. USE OF THE MACHINE (continued)
4.3. PREPARING THE MACHINE
ASSEMBLY 1. Screw the hose onto the high-pressure filter support (F) using the
spanners supplied. 2. Screw the other end of the hose onto the spray gun
connector. 3. Fit the tip gasket (S) and tip seat (T) into the tip support,
then screw the tip support onto the spray
gun and screw it in as far as it will go to secure it.
CONTROLS · The on/off switch (A) is located on the machine side.
· The 2-position valve (G) is located near the high-pressure filter:
Vertical position (priming)
Preliminary filling of the product circuit.
Pressure release.
Horizontal position (spraying)
Spraying onto the surface to be covered.
· The potentiometer (B1), located on the housing, is used to adjust the spraying pressure according to the product and the work to be carried out and to start the motor for pumping.
SPRAY GUN
The trigger must always be locked when the gun is not in use or for any
manipulation on the gun (tip change, repair, etc.).
· To lock or unlock the spray gun trigger, press the locking pin (M) (trigger
released).
· The tip must be inserted with the point facing forward.
· Replacement of the filter in the gun grip: (PaintSpray spray-gun only) –
Release the trigger protection. – Unscrew the product inlet connector and pull
the grip downwards to release the filter and remove it. – Install the new
filter in its place, pierced side up. – Refit the handle in reverse order.
The filter must be replaced without any pressure in the gun. Carry out a
pressure relief (see next page) before this operation.
Depending on the product to be sprayed, it may be necessary to change the size of the tip and/or the grip filter.
P12 User manual – Eurospray XL
202402-672-ENG
4. USE OF THE MACHINE (continued)
4.3. PREPARING THE MACHINE (continued)
PRESSURE RELIEF
It is essential to release the pressure from the hose and gun when the machine
is switched off (for any reason). This procedure avoids the risk of injury
when resuming work.
1. Lock the gun trigger. 2. Switch off the machine (button (A) in position
0). 3. Turn valve (G) to vertical position. 4. Unlock the trigger, place the
gun over an empty container, then press the trigger to release the
pressure. 5. When all the pressure has been released, lock the trigger again.
4.4. PREPARING THE PRODUCT TO BE SPRAYED
· To ensure optimum atomisation of the product, it is important to dilute it
if necessary in accordance with the manufacturer’s dilution recommendations
(refer to the technical data sheet for the product to be sprayed).
· Mix the product (by hand or using a portable mixer) and dilute it directly
into the bucket.
DILUTION RECOMMENDATIONS
Products Water-based or solvent-based paints
Wall paints (water-based or solvent-based)
Varnishes Wood protection products, oils, stripping products, disinfectants,
phytosanitary products Ready-to-use film-plasters
Dilution from 5 to 10% from 0 to 10%
none none none
The values given in the table above are for guidance only. Dilution must comply with the recommendations on the product packaging and can be adjusted by carrying out spray tests (see Spraying technique section).
202402-672-ENG
User manual – Eurospray XL P13
4. USE OF THE MACHINE (continued)
4.5. STARTING UP
When using the machine for the first time, start it up with water to check
that it is working properly and to remove any impurities.
1. Lubricate the pump using the burette supplied (through the slot (I)). 2.
Disconnect the return hose (D) from the suction rod (C). 3. Place the return
hose (D) in an empty bucket and the suction rod in the bucket of product to be
sprayed (or water for the first use). 4. Plug the machine into the mains.
Before connecting the machine to the mains, check that the voltage is suitable
for the machine’s needs.
5. Turn the valve (G) to the vertical position (priming). 6. Set switch (A)
to position I to switch on the machine. 7. Adjust the pressure using the
potentiometer (B1), suction will start. 8. As soon as the product flows into
the empty container through the return hose, stop the machine
(potentiometer on 0). 9. Attach the return hose to the suction rod. 10. Turn
the valve (G) to the horizontal position (spraying). 11. Point the spray gun
at a piece of cardboard and start the machine using the potentiometer. 12.
Unlock the spray gun and press the trigger to spray the cardboard until the
product comes out
evenly. 13. Release the trigger and lock the gun. 14. When the red light on
the control panel is on, the machine is ready to work.
P14 User manual – Eurospray XL
202402-672-ENG
4. USE OF THE MACHINE (continued)
4.6. SPRAYING TECHNIQUE
Make sure that the hose is not pinched or bent and that it is not in contact
with objects with sharp edges that could damage it.
It is advisable to carry out test sprays on a piece of cardboard to obtain the
optimum spray pattern and to familiarise yourself with the use of the gun.
During use, it is normal for the pump to stop and restart. This is a matter of
pressure regulation and not a malfunction of the machine.
If the product dilution and pressure setting are correct, the product jet will be regular.
If the product jet shows irregularities or spray cords :
· Increase the pressure gradually.
· Dilute the product further (in 5% increments, without ever exceeding the
dilution limit recommended by the product manufacturer).
· Reduce the tip size.
202402-672-ENG
User manual – Eurospray XL P15
4. USE OF THE MACHINE (continued)
4.6. SPRAYING TECHNIQUE (continued)
To achieve optimal results, the surface must be covered as evenly as possible,
using the right gestures: · The arm must move at a regular speed, without
interruption, and the distance between the gun and
the surface to be covered must be constant (25 to 30 cm). · Press the trigger
only after starting the gun movement and release it before ending the
movement.
· To obtain an even coverage, overlap the strokes by approximately 30%. · Move
your whole arm, not just your wrist, to limit irregularities. · The spray gun
should be perpendicular to the surface to be covered to avoid differences in
the
thickness of the product layer.
25 – 30 cm 25 – 30 cm
P16 User manual – Eurospray XL
202402-672-ENG
4. USE OF THE MACHINE (continued)
4.7. UNCLOGGING THE TIP
If, during spraying, the product jet becomes distorted or stops completely,
the tip may be blocked. In this case, proceed as described below.
Never try to unclog the tip with your fingers. The pressurised product can
cause serious injection injuries.
1. Lock the gun trigger. 2. Turn the tip 180° in the tip support (with the
tip pointing towards the back of the gun). 3. Place valve (G) in horizontal
position. 4. Unlock the gun and press the trigger (gun pointing towards a
cardboard box). The pressure in the
hose will remove the obstruction. 5. When the tip is unclogged, the product
jet becomes straight and regular again. Release the trigger
and lock the gun. 6. Turn the tip back to its original position (pointing
forward) and resume spraying as normal.
4.8. STOPPING WORK
Carry out a pressure relief (see 4.3.) after stopping the machine and before
carrying out any work on it.
· Stop the machine (switch (A)), then disconnect the power cord (E). · Place
the gun in a plastic bag and seal the bag. · Use a little water to lightly
dampen the surface of the product in the bucket. This prevents a layer of
dried product forming.
202402-672-ENG
User manual – Eurospray XL P17
5. MAINTENANCE
5.1. CLEANING PROCEDURE
The machine must be cleaned immediately after each use to ensure optimum
performance. Dried product residues can cause malfunctions.
Never use a combustible product for cleaning.
1. Carry out the pressure relief procedure (see 4.3.). 2. Lock the gun
trigger. 3. Remove the tip holder. 4. Place the suction tube and return hose
in a bucket of water (or a solution suitable for cleaning the
product). 5. Turn the valve (G) to the horizontal position, then set the
pressure to maximum with the
potentiometer (B1). 6. Point the gun at an empty container.
If rinsing with a solvent, use a metal container placed on the floor and maintain contact between the gun and the container.
7. Unlock the gun and press the trigger until the water (or solvent) comes
out clean from the gun. 8. Stop the machine and disconnect the power cable. 9.
Turn the valve (G) to the vertical position. 10. Pull the trigger to release
the pressure, then lock the gun. 11. Remove the gun from the hose using the
spanners supplied. 12. Dismantle the connector (N) and remove the grip
filter. (PaintSpray spray-gun only) 13. Clean the grip filter using a soft
brush and a suitable product. 14. Refit the clean filter (pierced side up)
and refit the gun grip.* 15. Clean the tip holder, seal, seat and tip. 16.
Replace the gasket and seat in the tip holder and refit it to the gun. 17.
Pinch the hook to remove the suction pipe (C) and clean it with a cloth. 18.
Also clean the return hose (D) with a cloth. 19. Remove the hose from the
connector (F) using the spanners supplied. 20. Pour approximately 60 ml of
cleaning and storage liquid into the bucket of water (respecting the
dilution indicated on the bottle), then plug in the power cord. 21. Switch on
the machine and run it for a few seconds so that the liquid flows into the
circuit and
preserves it until the next time it is used (place a cloth over the connector
(F) to prevent the liquid dripping onto the floor).
*PaintSpray spray-gun only.
P18 User manual – Eurospray XL
202402-672-ENG
5. MAINTENANCE (continued)
5.2. DEFECTS AND REMEDIES
Defects
The machine does not start.
The machine runs but does not suck in product when the valve (G) is in
the vertical position.
The machine sucks in product but, when the gun is activated, the pressure
drops. The gun is leaking. The tip support is leaking. The gun does not work.
The product jet is dripping.
Causes
The machine is not plugged in. The machine is stopped.
The machine has been switched off while under pressure.
The mains plug does not supply any voltage.
The electric extension cable is unsuitable or damaged.
The machine is overheating. Motor fault.
The machine does not prime. The suction rod (C) is not fully immersed in the
product bucket or the product bucket is
empty. The suction rod is blocked.
The suction rod is not fitted correctly.
Ball(s) stuck. Valve (G) is blocked.
The tip is worn.
Pump filter (H) clogged.
Gun filter (O) clogged. Product not sufficiently diluted.
Impurities in the product. Ball(s) stuck
Some parts of the gun are dirty or worn. The tip is incorrectly fitted. The
seal is worn. The gun or tip are blocked.
The tip is mounted upside down. The product is too viscous or contains
impurities. Gun or tip clogged.
The tip is worn.
Pump filter (H) clogged.
Gun filter (O) clogged.
Remedies
Plug in the power cable. Turn switch (A) to position I. Release the pressure,
then return the valve (G) to the horizontal position.
Check the mains plug.
Change the extension cable.
See procedure 4.1. Contact the After-Sales Service. Try to prime the machine
again.
Immerse the suction pipe in the product or replace the product bucket.
Clean the suction pipe. Pinch the hook to dismantle the rod and
reassemble it correctly. Unblock.
Contact the After Sales Service. Replace the tip with a new one. Unscrew the
cover and remove the filter to
clean it. Clean or replace the filter. Dilute the product further.
Filter the product. Unblock.
Contact the After Sales Service. Remove the tip and refit correctly.
Clean the seal. Clean the filter (O) or the tip.
Replace the tip.
Dilute the product further or filter it.
Clean the filter (O) or the tip. Replace the tip with a new one. Unscrew the
cover and remove the filter to
clean it. Clean or replace the filter.
In case of an unknown defect or a doubt on the good running of the machine, do not try to repair it by yourself or to dismantle it. Contact an authorized After-Sale Service or our hotline : +33 4 42 29 08 96.
202402-672-ENG
User manual – Eurospray XL P19
5. MAINTENANCE (continued)
5.3. ERROR CODES
The various error codes are displayed on the display on the housing.
Codes ???u E03
E04
E05 E12 E14 E15
Causes
Remedies
Low voltage warning.
Unplug the machine and set the pressure control to minimum. Wait for the
display to turn off. Reconnect and start the machine.
Check the power cable.
Connect to an electrical socket with sufficient power.
Contact after-sales service.
Clean the pressure sensor.
Damaged pressure sensor.
Check that the sensor cable is properly connected. Replace the pressure sensor.
Contact after-sales service.
Check the power supply, try to connect to another socket.
Increase tip size.
Control board overcurrent.
Dilute the product (follow the manufacturer’s recommendations).
Replace the pressure sensor.
Replace the control board.
Contact after-sales service.
Switch the machine off and wait for it to cool down.
Control board overheating.
Check the electrical supply. Increase tip size.
Contact after-sales service.
Check that the product bucket is full.
Machine is running empty.
Check that the product is not cavitating.
Switch the machine off and restart.
Check the electrical supply.
Motor blocked.
Check that the product pump is not blocked (breakage or dry product).
Contact after-sales service.
Switch the machine off and restart.
General card error.
Check the electrical supply. Replace the control board.
Contact after-sales service.
P20 User manual – Eurospray XL
202402-672-ENG
6. DECLARATION OF CONFORMITY
THE MANUFACTURER : EUROPE PROJECTION 228, avenue Olivier Perroy 13790 ROUSSET
DECLARES THAT THE EQUIPMENT DESIGNATED BELOW: Trademark : EUROPE PROJECTION
Type : Airless sprayer Model : EUROSPRAY XL
COMPLIES WITH THE DIRECTIVES: · Machines 2006/42/CE · Low voltage 2014/35/UE ·
CEM 2014/30/UE · ROHS 2011/65/UE
ROUSSET, JANUARY 20th 2024 Patrick BOREL President
EUROPE PROJECTION – 228, avenue Olivier Perroy 13790 ROUSSET
Tél : +33 (0)4 42 29 08 96 – www.euromair.com SAS au capital de 400 000 – RCS
Aix-en-Provence B 394 961 510 – NAF 2892 Z – Intracom : FR 54 394 961 510
202402-672-ENG
User manual – Eurospray XL P21
7. WARRANTY CONDITIONS
Each equipment is delivered inspected and tested. We exclude any warranty for
visible defects, not notified by the customer within 48 hours.
The equipment sold is guaranteed during the manufacturer’s warranty from the
date of purchase, as specified on the original proof of purchase, and under
the conditions defined by the manufacturer.
This warranty covers any equipment against any manufacturing or material
defect, under normal conditions of use. Insofar as the customer is presumed to
be a professional of the same field of specialty, this warranty covers only
the defect of conception of the equipment rendering it unfit for its use,
which could not be detected by a professional buyer.
The defects or deteriorations caused by natural wear, external accident or a
modification, use, storage or treatment of the equipment not planned by the
manufacturer, nor specified by ourselves, are excluded from any warranty.
Are expressly excluded from the warranty the defects resulting from an
improper use, the application of abrasive or corrosive products, an
inappropriate installation, the negligence, an insufficient maintenance or
cleaning, inappropriate conditions of storage, chemical, electronical or
electric influences, any change in the normal process of use.
The following wearing parts are not covered by the warranty (non-exhaustive
list): rotors, stators, driving shafts, connecting rods, seals, cleaning
balls, spray guns, lance, nozzle, hose, needle kits, cylinders, piston rods,
prime/spray valve assy, seal kits, membranes, suction and delivery valves,
carding machine vanes, filters, oils, chains and quick-release clip.
The warranty also excludes the equipment on which the serial number was erased
or made illegible, on which unauthorized people made attempts of repair, which
were totally or partially dismantled.
Our equipment are covered by a manufacturer’s warranty (parts and labor) of 12
months following the purchase date by the final customer, without exceeding 24
months from the date of purchase by the client. This manufacturer’s warranty
shall automatically cease if the customer does not resell the equipment within
24 months of its purchase. The cases of exclusion of warranty mentioned in
articles above are also applicable to our own equipment.
The manufacturer’s warranty shall always be subject to the presentation of the
purchase invoice.
If the defective equipment is covered by the manufacturer’s warranty, it shall
be repaired or replaced at our discretion free of charge.
If the defective equipment is not covered by the manufacturer’s warranty, we
shall issue a quote for the repair that we shall submit to the customer for
approval.
Except as otherwise required by law, this manufacturer’s warranty is exclusive
of all other warranties, including the statutory warranty of hidden defects.
In case of intervention of our services on a breakdown caused by the customer
or an incident excluded in the conditions referred to above, the costs of
repair and transport shall be invoiced to the customer. We exclude all
liability for indirect damages suffered by the customer, such as, but not
limited to, loss of income, turnover, loss of profits, loss of image, of any
kind whatever.
P22 User manual – Eurospray XL
202402-672-ENG
7. WARRANTY CONDITIONS (continued)
In all cases, our liability shall be limited to the amount paid by the
customer for non-compliant equipment.
Any legal action of the customer against us relating to the warranty of the
equipment shall be barred 1 year after the date of discovery of the defect.
The customer shall have to prove the date of this discovery.
Request for Warranty For any request related to the repair of an equipment
covered by the manufacturer’s warranty, the customer shall have to fill the
warranty form, available on our website, under After-Sale Service. For a full
dossier, the following documents shall have to be attached:
· the purchase invoice of the final user · pictures of the defective parts of
the equipment · a description of the breakdown · the quote of labor if the
customer is certified by EUROMAIR for repairing the equipment No invoice of
labor shall be taken into account without our prior approval.
Analysis of the breakdown by our technical department A file number shall be
given to the customer and an answer shall be provided within 48 working hours
after reception, provided that the request for warranty is considered as full.
In the event the equipment is covered by the manufacturer’s warranty, we shall
confirm the warranty to the customer and send him a quote (without price)
detailing the parts to be changed and any comments.
Return of replacement parts Replacement parts must be ordered with a warranty
agreement number and will be made available to the customer at our factory.
The conditions of return of the equipment are detailed in our Delivery terms.
In the case of a warranty claim on an on-board component such as a Kohler,
Honda or Vanguard engine in a machine manufactured by us, only the
manufacturer of the component is able to validate the warranty coverage. In
this case, the request must be addressed directly to the manufacturer of the
component or to its nearest authorised representative. The Euromair, Euromair
MPC or Mixer service centres may be considered as the manufacturer’s
representatives if they are the closest. As this principle also applies to
batteries, our supplier Parts Holding Europe, or one of its sister companies,
remains your contact for your requests (https://www.partsholdingeurope.com/).
202402-672-ENG
User manual – Eurospray XL P23
EUROPE PROJECTION – 228, avenue Olivier Perroy 13790 ROUSSET – Tél : +33 (0)4 42 29 08 96 SAS au capital de 400 000 – RCS Aix-en-Provence B 394 961 510 – NAF 2892 Z – Intracom : FR 54 394 961 510
More information on www.euromair.com
P24 User manual – Eurospray XL
202402-672-ENG