FITUEYES P14L1651B Camera Sync Strip Light Installation Guide

Table of Contents

Specifications

What’s in the Box:

Easy Installation:

Preparation Before Installing:

Installing Steps

Wipe the installation surface (normally back of TV/PC) to ensure it is dry and clean.
Stick the strip light to the back of the TV, following the arrow direction of the LED strip light.
Position the camera to the top-center of the TV horizontally.
Insert the cable of the strip light and the power into the device.
Power on the strip light, tear off the protective film, and try connecting with the FITUEYES app.

App Operation Instructions:

What you need

A Wi-Fi router supporting 2.4GHz and 802.11 b/g/n bands (5GHz is not supported).

Steps

Download the FITUEYES app from App Store (iOS) or Google Play (Android).
Register an account and connect to the 2.4GHz Wi-Fi.
Select Screen Sync Controller, enter Wi-Fi network name and password.
Follow instructions to connect the light strip with the app using AP or EZ mode.

FAQ

Q: What do I do if the light strip does not connect to the app?
A: If the light strip does not connect, ensure you are using a 2.4GHz Wi-Fi network and follow the instructions to switch between AP and EZ modes until successful connection is established.
Q: Can I install the strip light on any surface other than a TV or PC?
A: While TV/PC back is recommended, you can install the strip light on other dry and clean surfaces. Ensure proper adhesion for optimal performance.

CAMERA SYNC STRIP LIGHT
P14L1651B / P14L1851B

On/off button|

Press to turn On/Off.
Long press the On/Off button for 5 seconds till the strip light is off.Wait for around 10 seconds.

Strip light will blink slowly or blink quickly to enter AP or EZ pairing mode.

---|---
Indicator light| Indicator light
USB Type-C| Connect to extra device (eg.light bar)
Power| DC power
Strip light port| Connect LED strip light

Preparation Before Installing:
- Unbox the strip light check all items listed in the packing list.
- Power on the strip light and check whether it lights up.
Installing Steps:
- Wipe the installation surface (normally back of TV/PC) to ensure it is dry and clean.
- Stick the strip light to the back of the TV. Press them firmly and then reinforce them with the provided clips. Please follow the arrow direction of the LED strip light.
  Note: You can also stick the strip light from any corner of the TV clockwise or anticlockwise. But please configure likewise in app later.
- Position the camera to the top-center of the TV horizontally.
- Insert the cable of the strip light and the power into the device.
- Power on the strip light, tear off the protective film and try connecting them with the FITUEYES app.

What you need:

A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

Download the FITUEYES app from the App Store (iOS devices）or Google Play (Android devices).
Register an account.
Connect to the 2.4GHz Wi-Fi.

Download the FITUEYES app. Register and log in.
Click “+” or “Add Device”.
Select the Screen Sync Controller.
Enter 2.4GHz Wi-Fi network name and password, then tap “Next”.
When the light strip flashes quickly, click “Confirm the strip light blinks slowly or rapidly”, and then click “Next”. Go to step: 10
If the light strip is flashing slowly, please click “EZ Mode” in the upper right corner and select “AP Mode”.
When the light strip shows slow flashing status, select “AP Mode”, then click “Confirm the strip light blinks slowly or rapidly”, and then click “Next”. Go to steps: 8/9/10
Click “Go to Connect” to go to the hotspot connection.
Select the corresponding “SmartLife-XXXX”, wait until the status is connected, and click “Back”.
Wait a moment.
You can edit the camera name and click “Done”.
Click “Next”.
Select the light strip input position, then tap “Next”.
Select the winding direction of the light strip, then tap “Next”.
Read “Add the guide”, then tap “Next step”.
If you need delete the boot, click “Got it”.
Click “Full Screen”.Click on 8 anchor points, see the illustration for details.
Click “Next”.
Observe the synchronization status of screen and lighting effect, then tap “Complete”.
Connection is successful. Open Multiple Color choose lntensity you like.