Mareda MAQS821 Two Door Wardrobe Installation Guide
- August 28, 2024
- Mareda
Table of Contents
Mareda MAQS821 Two Door Wardrobe
Specifications
- Model: MAQS821
- Battery Life: 150 minutes
- Speed Settings: 10
- Product Dimensions: 995mm x 529mm x 1957mm
Product Usage Instructions
Assembly
- Assemble the product according to the manufacturer’s instructions provided in the manual to ensure safety.
Indoor Air Quality
- Furniture containing wood-based panels may emit substances into indoor air.
- After assembling the furniture, it is recommended to ventilate the room for approximately four weeks or until any residual smell dissipates.
FAQ
- Q: How long should I ventilate the room after assembling the furniture?
- A: It is advised to ventilate the room where the furniture stands for about four weeks or until any smell is eliminated.
Dimension
- Follow the manufacturer’s assembly instructions, otherwise, danger may occur.
Precaution
Furniture containing wood-based panels (particle board, fibreboard, plywood, etc.) may emit into indoor air in considerable amounts of substances used in the production processes. The level of this emission is examined and it meets the applicable standards. After assembling the furniture, it is advised to regularly ventilate the room where the furniture stands, which should last about four weeks or until the smell is eliminated.
Service
Parts And Tools
DEAR CUSTOMER
After full assembly and set up of the furniture made of high gloss elements,
you must remove the protective foil. In the case, where such elements are
connected during assembly, then the foil must be removed partially only from
the places of connection. Removal of the foil should be completed after full
assembly and set up of the furniture.
WARNING! After the removal of the foil, the elements can be cleaned and
used only after 72 hours. The cleaning must be conducted with the use of
delicate and soft fabrics and if it’s necessary, the fabrics may be slightly
moistened with water or a cleaning agent intended for cleaning the furniture.
Installation Instructions
Before suspending or fixing furniture to the wall (to prevent falling over), check the type and strength of the wall. Select wall plugs and screws appropriate for the given type of the wall. In the case of doubts, contact a specialist. The installation must be performed by a competent person.
WARNING! If the rawlplugs with screws are attached to the product, then they are intended only for walls made of solid and homogeneous materials.
- To prevent the piece of furniture from falling over, please attach it permanently to the wall.
GUIDELINES FOR FURNITURE CARE
- Please follow the below-specified remarks in order to properly take care of your furniture:
- A clean dry soft fabric must be used for cleaning. If the furniture requires a thorough cleaning, then you can slightly moisten it with water or a cleaning agent designed for furniture cleaning, and subsequently, the cleaned elements must be wiped until they’re dry.
- Metal and glass parts must be cleaned using commercially available cleaning agents designed for cleaning of this type of materials, in accordance with the included instructions.
- Do not use corrosive agents, scouring agents, and other agents if their intended use is unknown.
- The cleaning agents must have clear markings that they are intended for cleaning the furniture.
WARNING! High gloss elements, from which the protective foil was removed, may be cleaned and used only after 72 hours.