LENSLOCK GEN 12.5 Design Law Enforcement Body Cameras Instruction Manual

LENSLOCK GEN 12.5 Design Law Enforcement Body Cameras

Specifications:

• Resolution: Full HD
• Storage: 64GB internal memory
• Battery Life: Up to 8 hours
• Connectivity: Bluetooth, WiFi, GPS

Product Usage Instructions

Power On/Off:
To power on the Gen 12.5 BWC, press and hold the blue power button for 3-4 seconds. The BWC will emit a vibration and the LED screen will illuminate. To power off, press and hold the blue power button again for 3-4 seconds.

Start Recording:
To start a recording, single press the center record button. The BWC will emit a single vibration, display recording information on the LED screen, and activate a red LED on top of the BWC.

Stop Recording:
To stop a recording, double press the center record button. The BWC will emit three vibrations, stop the recording, and reset the LED screen display.

Photo Capture:
To capture a photo, single press the photo button located above the power button. The BWC will emit a single vibration to indicate the photo capture.

Enable/Disable WiFi:
To enable WiFi for mobile application access, press and hold the Fn (function) button for 2-3 seconds. To disable WiFi, repeat the action. Note that enabling WiFi may reduce battery life.

Device/Firmware Information:
To view Device ID and firmware version, double press the Fn (function) button. Double press again to return to normal LED screen display.

Stealth Mode:
To toggle stealth mode (disabling all LED indicators and audio tones), press and hold the eye icon for 2-3 seconds. Repeat to exit stealth mode.

PRODUCT OVERVIEW

1. LCD Screen
2. Status LED
3. Photo Button
4. Power Button
5. Speaker
6. Infrared Lights (IR)
7. Microphone
8. Lens
9. Record Button
10. Mini-USB Connector/Reset
11. Function/WiFi Button
12. Stealth Button
13. Mute Button
14. Castellation Mount
15. Docking Plate

BUTTON FUNCTION

Power On/Off

To power on the Gen 12.5 BWC, press and hold the blue power button for 3-4 seconds. The BWC will emit a vibrate and the LED screen will illuminate. The LED screen will remain illuminated until it has reached 30 seconds of inactivity. Activation of any button will illuminate the LED screen.

To power off the Gen 12.5 BWC, press and hold the blue power button for 3-4 seconds.

Pre-Record

The on the LED screen indicates the BWC is powered on and currently set in pre-record. The BWCs are configured with a 30-second pre-record feature. Upon activating a recording, the recording will include an additional 30-seconds of video prior to the recording activation. While 30-seconds of video will be included prior to the recording activation, audio will be muted during the 30-second prerecord.
Once a recording is activated, video and audio will be present until the recording has concluded.

Start Recording

To start a recording, single press the center record button. The BWC will emit a single vibration, will appear on the LED screen, as well as a red LED on top of the BWC. In addition, the recording duration will appear on the LED screen. After 30 seconds of inactivity, the LED screen will appear dormant, however the red LED on top of the BWC will remain while recording. While recording, a vibration notifier at a select interval will alert the user that a recording is present.

Stop Recording

To stop a recording, double press the center record button. The BWC will emit three vibrations, will reappear on the LED screen, and the red LED will disappear on top of the BWC. The recording duration will revert to 00:00:00 on the LED screen.

Photo Capture

To capture a photo, single press the photo button located above the power button. The BWC will emit a single vibration and a still-image will be captured via the BWC.

You may capture a photo while in pre-record and/or while recording.

Enable/Disable WiFi

(*to connect to the mobile application)

To enable WiFi to access the mobile application, press and hold the Fn (function) button for 2-3 seconds. The BWC will emit two vibration and will appear on the LED screen to indicate WiFi is enabled.
To disable WiFi, press and hold the Fn (function) button. will appear on the LED screen indicating the WiFi is disabled.

Device/Firmware

To toggle between the Device ID on the BWC as well as the firmware version on the BWC, double press the Fn (function) button.
The Device ID and firmware version will appear on the LED screen. To revert to the normal LED screen, double press the Fn (function) button.

Stealth Mode
Stealth Mode will disable all LED indicators (LED screen/LED) and audio tones/chirps. Vibration alerts will remain while in stealth mode.
To toggle the BWC to stealth mode, press and hold the “eye” icon for 2-3 seconds. Repeat to toggle out of stealth mode.

If your BWC emits a vibration when you attempt to power on, however the LED screen does not illuminate, it is most likely in stealth mode. Press and hold the “eye” icon and the LED screen should illuminate.

Mute Function

To mute the audio during a recording, press and hold the “microphone” icon for 2-3 seconds. The LED screen will display indicating that the BWC is recording, however audio is currently muted. To resume audio, press and hold the “microphone” icon for 2-3 seconds where will reappear, indicating the recording has resumed with audio.

USB Mini-USB Charging/Reset Button

In addition to charging while docked within the LensLock docking station, the BWC can be charged remotely via a USB mini-USB connector cable. Insert the mini-USB into the input located within the USB cover.

Located within the USB cover, is a small reset button. If you are having issues with your BWC, please insert a fine tip tool into the reset button and press for one second. The BWC should run through a power reset.

Accessories Bundle

Troubleshooting

Frequently Asked Questions (FAQ):

Q: How do I know if the BWC is recording?
A: When recording, a red LED on top of the BWC will be active,and the LED screen will display recording information.

Q: How can I capture a photo while recording?
A: You can capture a photo by single pressing the photo button during recording or pre-record mode.

Q: How do I connect to the mobile application?
A: Refer to the Mobile Application training document for detailed connection instructions.

LensLock Support

• The LensLock Support team is ready and available for any questions that may arise.

• To reach the support team via email, please send a detailed email to support@lenslock.com and a representative will promptly get back with you.

• To reach the support team via phone, please contact
  866- LENSLOCK and press “3” for Client Support.

• To reach the support team via Live Chat, please access the Live Chat feature located within the LensLocker Portal.

FCC STATEMENT

Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>