Z and Z Medical Radiography General Sponge Positioning Bundle Instructions
- August 28, 2024
- Z and Z Medical
Table of Contents
Z and Z Medical Radiography General Sponge Positioning Bundle
Product Information
Specifications
- Product Type: Coated Positioners & Table Pads, Closed Cell Positioners
- Manufacturer: Z&Z Medical, Inc.
- Recommended Use: Medical imaging accessory
- Material: Coated sponges, closed cell foam
Product Usage Instructions
Cleaning Instructions
- For coated positioners & table pads, gently wipe the surface with a damp cloth and mild soap to remove any dirt or stains.
- For closed-cell positioners, use a mild detergent and water solution to clean the surface, avoiding harsh chemicals.
Care Instructions
- Store the positioners and table pads in a clean and dry environment to prevent mold or mildew growth.
- Avoid exposing the products to direct sunlight or extreme temperatures to prolong their lifespan.
Storage Recommendations
- When not in use, store the positioners and pads in a designated storage area away from moisture and potential damage.
- Ensure proper ventilation in the storage area to maintain the integrity of the foam materials.
FAQ
-
Q: How often should I clean the coated positioners and table pads?
A: It is recommended to clean the coated products after each use or as needed to maintain hygiene and longevity. -
Q: Can I machine wash the closed cell positioners?
A: It is not recommended to machine wash closed cell positioners as it may damage the foam material. Hand cleaning with a mild detergent is advised. -
Q: Where can I find more information on Z &Z Medical’s Exclusive Foam Products?
A: Visit www.zzmedical.com/blog for blog posts and frequently asked questions related to Z&Z Medical’s Exclusive Foam Products.
Thank you for choosing Z&Z Medical, Inc. for your medical imaging accessory needs. To ensure the proper care of your new coated or closed cell sponges and/or coated table pads, we recommend the following guidelines for cleaning, care, and storage.
CLEANING
- TO CLEAN the surface of coated and closed cell sponges and/or coated table pads that have become dirty or dusty with normal use and storage, wash with cold water and a block of mild general-purpose soap (409 spray, etc.).
- Avoid using detergent cleaners that contain hydrocarbon solvents like acetone or ammonia.
- Avoid rigorous scrubbing, abrasive pads, or stiff brushes as they can damage the surface.
- TO DISINFECT the surface of your coated and closed cell sponges and/or coated table pads that have become soiled with blood, bodily fluids, barium, betadine, or other fluids, we recommend the use of hospital-approved disinfectant wipes or sprays. Allow the manufacturer’s recommended drying time in between patients.
- A 10% Bleach solution can be used as a disinfectant if the manufacturer’s guidelines are strictly followed. Failure to comply with these guidelines will result in a void of warranty.
- Do NOT autoclave, steam, soak, launder, or submerge in water.
CARE & WARRANTY
- Z&Z Medical foam products are designed to provide aid to technologists when positioning a patient, and comfort for the patient during imaging procedures. The surface provides a barrier that can be cleaned in between patients. If your coated foam product is punctured or torn, this barrier does not provide a barrier of protection for infection control and should be taken out of service immediately and replaced. This does NOT apply to closed-cell foam products as the crosslink polyethylene foam is non-porous and resistant to fluid even if punctured or torn.
- Because of the nature of foam products, there is a 30-day manufacturing warranty on sponges and/or table pads to be free from defects in material and workmanship under normal use. The warranty does not cover damage from misuse, mishandling, or neglect.
STORAGE
- Store sponges in a clean dry area when not in use.
- Table pads should be kept on a flat surface to prevent creases.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>