eberry G21 Digital Safe Instructions
- August 28, 2024
- eberry
Table of Contents
eberry G21 Digital Safe
Product Specifications
- Model: G21
- Power Source: Battery-operated
- Code Length: 3-8 digits
- Color: Black
Product Usage Instructions
First Use
- Set the User Code:
- Locate the green reset button on the back of the safe door.
- Press the reset button; the yellow light will flash twice with two beeps.
- Enter a new user code of 3-8 digits immediately and press # to confirm.
- If set successfully, the yellow light will flash twice with two beeps.
- Set the Master Code:
- With the door unlocked, input 00 and press the reset button.
- Start setting the master code when the yellow light goes on.
- Input a new master code of 3-8 digits and press # to confirm.
- If set successfully, the yellow light will flash twice with two beeps.
Opening and Closing the Safe:
- Open the Door:
- Enter the user code or preset password and press #.
- If correct, the green light will flash for 6 seconds with two beeps.
- Turn the knob clockwise to open the door.
- Close the Door:
- Turn the knob anticlockwise to close the door.
Automatic Lock:
- If there are three continuous wrong entries, warning beeps will activate for different durations.
- Follow instructions in the manual to resolve this situation.
Undervoltage Warning:
- If the red light flashes during operation, replace the batteries immediately to ensure normal use.
Mounting Process:
- Place the safe securely and drill holes for dowels.
- Use appropriate screws based on the wall type (expansion for concrete, clamping for wood).
- Ensure the safe is correctly attached and tight to the wall.
FAQ
Frequently Asked Questions
- Q: What should I do if I forget my user code?
- A: You can reset your user code by following the instructions in the manual for setting a new user code.
- Q: How can I disable the automatic lock feature?
- A: The automatic lock feature is a security measure. It cannot be disabled, but you can refer to the manual for steps to handle lockouts due to wrong entries.
Introduction
Thank you for purchasing our product.
Before using this unit, please read this manual in order to avoid improper
handling and use of the device.
You have just made an important step to protect your property. Each of our
safes is professionally produced and ensures the greatest possible security.
Before using read carefully the instructions on the following pages of this
manual.
PLEASE KEEP THE KEY IN A SAFE PLACE
First use
Method one:
- Find the accessories bag in the package and take out the emergency keys.
- Remove the battery cover, the key hole is on the right side of the battery box.
- Insert the emergency key into the key hole, rotate the key anti-clockwise and the knob clockwise to open the door.
Method two:
- Find the accessories bag in the package, take out four AAA batteries and put them in the battery box.
- The safe should have electricity now, input preset user code “159” to open the door. Every time you press the number, yellow light will flash once with one beep. If the code is correct, green light flashes for 6 seconds with two beeps.
- Rotate the knob clockwise and open the door within 6 seconds of entering the code.
WARNING: take care about the right polarity of inserted batteries. If there is a failure of the voltage supply longer than 3 minutes, the safe will be reset and it is necessary to proceed according to “First use” chapter.
Set the user code
- Find the green reset button on the back of the safe door. Press it, yellow light will flash twice with two beeps.
- Enter new user code with 3-8 digits immediately and press “#” to confirm.
- If set successfully, yellow light will flash twice with two beeps.
Set the master code
- With the door unlocked, input “00” and press the reset button. Start setting the master code when yellow light goes on.
- Input new master code with 3-8 digits and press “#” to confirm. The code is set successfully when yellow light flashes twice with two beeps.
- If the light flashes with three beeps, the code change was not effective and you need to try again.
Open the door
- Enter the 3-8 digit user code and press “#”. If it is correct, green light will flash for 6 seconds with two beeps. Turn the knob clockwise to open the door.
- Enter the preset password “159” and press “#”. If it is correct, green light will flash for 6 seconds with two beeps. Turn the knob clockwise to open the door.
CAUTION: Entering wrong code leads to yellow light flashing three times with three beeps.
Close the door
- Turn the knob anticlockwise to close the door.
Automatic lock
- Three continuously wrong entries will activate the warning beeps for 20 seconds.
- Another three continuously wrong entries will active the warning beeps for 5 minutes.
CAUTION
- The keypad would be disabled during the beeping. You can only stops the beeps by opening the safe with emergency keys and power-cut by removing the batteries.
UNDERVOLTAGE AND MOUNTING PROCESS
UNDERVOLTAGE WARNING
- If the battery power is lower than 4.5 V, red light flashes during operation. Batteries should be replaced immediately to ensure normal use.
Mounting process
- Put the safe to a place that cannot be easily manipulated.
- Drill holes for the dowels.
- Turn in expansion screws counterclockwise.
- Fix the safe on the wall using expansion or clamping screws.
- Make sure the safe is correctly attached to the dowels and tight.
WARNING: Use expansion screws for concrete walls and clamping screws for wooden walls.
The English version of the manual is an exact translation of the original manufacturer‘s instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>