We R makers 60000801 Thermal Cinch Binding Machine Owner’s Manual

: August 28, 2024
: We R makers

Table of Contents

We R makers 60000801 Thermal Cinch Binding Machine
DIAGRAMME
FCC
INSTRUCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

We R makers 60000801 Thermal Cinch Binding Machine

We-R-makers-60000801-Thermal Cinch-Binding-Machine-
product

thermal
CINCH

DIAGRAMME

We-R-makers-60000801-Thermal Cinch-Binding-Machine-5 WARNING
Read the instructions before using the machine and keep for future reference.

Keep the binding slot clean and free from strange objects.
For your safety, never touch the bottom of the Binding Slot because it can be hot.
Switch off the machine once the binding operation is completed.
Raise Dustproof Cover when not in use.
Max book size is 12 inch length by 1.4 inch width.
The machine will automatically turn off in 30 minutes without any operation.
The machine must be connected to a supply voltage corresponding to the electrical rating.
Unplug the machine before moving or when not in use.
Do not operate with a damaged cord or plug.
Do not overload the electrical outlet beyond its capacity.
Do not alter the attachment plug.
The plug is configured for the appropriate electrical supply.
The unit is intended for indoor use only.
Neglect of these safety precautions may cause electrical shock, fire, or damage to the machine.

FCC

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

INSTRUCTIONS

$We-R-makers-60000801-Thermal Cinch-Binding-Machine- $1$$

Select your binding spine and trim to desired book length.
Compile your book contents, the included .25 inch binding spines hold up to 50 sheets of copy paper or 25 sheets of cardstock.
Insert pages and covers into binding spine, peel off adhesive liners on either side of binding spine and adhere to front and back cover.
$We-R-makers-60000801-Thermal Cinch-Binding-Machine- $2$$ Insert any accessories by adhering to internal pages with adhesive and clipping to the edge of the book away from the snine
Plug in machine and flip power switch on side panel.
Indicator light will stop blinking and beep when machine is ready (approximately 2 minutes). $We-R-makers-60000801-Thermal Cinch-Binding-Machine- $3$$
Place book in machine and press TIMER.
ready (approximatery 2 minues nd beep when book is ready (approximately 2 minutes)
Remove book & let cool in cooling slot for 5 minutes, or until cool