SONY YY2080C Quad Powered Dolby Atmos Home User Guide
- August 27, 2024
- Sony
Table of Contents
YY2080C Quad Powered Dolby Atmos Home
“`html
Specifications:
- Model: YY2080C
- Serial No: [To be filled by user]
- Dimensions:
- Height: 4mm (3/16in)
- Width: More than 30mm (13/16in)
Product Usage Instructions:
1. Safety Precautions
To reduce the risk of fire or electric shock, do not expose the
product to dripping or splashing, and do not place objects filled
with liquids on the product.
2. Speaker Setup
-
Remove the cover on the rear of the speaker. Open the cover
downwards. -
If mounting the speaker on a wall, follow additional steps
provided in the manual.
3. Power Connection
Connect the AC power cord to the mains socket. Ensure the AC
adaptor is grasped by its adaptor section when unplugging, not by
its cord.
FAQ:
Q: Where can I find the serial number of the product?
A: The serial number is located on the following [specific
location to be mentioned in user manual].
“`
SONY:
Home Theatre System Système Home Cinema
5-049-830-11(1)
Reference Guide
EN
Guide de référence
FR
Guía de referencia
ES
https://rd1.sony.net/help/ht/2080/h_zz/
©2024 Sony Corporation Printed in Malaysia Imprimé en Malaisie
https://www.sony.net/
BRAVIA Theatre Quad
111111 II Ill Ill 11111111
- 5 0 4 9 8 3 0 1 1 * (1) Model, Modèle: YY2080C
ilGI
Home Theatre System
~fo”using th,unit, lasu”to rodlh,EndlJse,Lic:, nwAgr”‘!ment (EULA l suppli,
dwilhth,unit Tht conttntolt~ ag,., mt ntalsoapplies to s,>1akt r$ (1l vailablt
stp;,ratety ) connt <:ltd to tht unit (unlt ssthosts,>1akt f$ha”‘a st
paratelkt nst ag”t mt nl)
Mod.,l : YY2080C
The term ‘ product· in this document refers to the un it or it!; accessories.
Record the model and seria l numlar$ in the space provid.-1 be low. Reie r to
them whenever you ca ll : e : ~ ~ r S o r ; y do l t rr·11ardin11thisunit
S.. rialNo _ __ 1?'”t;:r:~~r;;: ~;;:;’; ~~;ber$ are locat~d on thle following
Dooot installtheproductina confinedsp;,ce,suchasabookc-orbuill·incabinet.
To rtduct tht riskof firt, dOOOICOVt r tht vtnt~alion01>”ningof theun it wilhntwspal>”r$,tablecloths, curtains, He. Do not expo.. th· uni t lo nalc.d fi ame sourcu (for · Xllmpl·. ~11hted amdlu)
To reducetheriskofftre orelectricshock.donot expos,elhisproduc tto dripp ingor splashing, anddo notplace object!; filledwilhliquids.such asva-.es.on the product
The unit is ootdisconnicted from Ihle AC po_, source (mains ) as 101>11 as it is connected to the wall oullt even ifthe unitit<e lf hasbe,ntun,.doff.
Th, ACadaptor is notdis<;onnectedfromthe ACpowe,sourc·[mains] aslongas itisconntctedtoth, wallou tl· t t vt niflht unitit!;t lfhas bffntumtdofl.
~/:t
unit”‘ that I t-.. po_, cord cant,,, unplu1111ed from th, wall socket im mediately in tho! ev ent
Asthe mainplu,;iofthleACad aptorisus.,dtodisconnectlh,;, ACadaptorfromthi
mains,conn,ict it to aneasilyacc;;ssibleACoutlet.Shouldyouooticianaboorma
lityinitdisconnectitfromtheACoutlit im,,..,.diately
ForR<tmote(ommandtf CAUTION Riskof explosionifbattuyis,.,pt.,c.,dt,yan
incorrecltyl>” 0i 5,l)O$eof u-.e dt>;,tt,eriesa<:eordingtobral
rulesandregul.11ions
Dooote~thlebatteries ( batl<lrypackorbatteriols irr..tall<.d )
toixC<issiveheatsuchassunshine,fire o r the like foralo”lltim,
This product hM magnol(s) which may interfere with pacema~rs. programmab”‘
shunt valves for hydnxephalU$ trutm, n~ or oth, r me-dkal devicu . Do not
plae@ this product close to f”‘r$0nS who use such med ica l devku. Consult
/Our doctor befo”‘ using this product iflOU u… any su(h m<tdkal d,vk”
Th· nam· plate and impOrtlnl information conc· ming safety are di5playe-d on
th· bottom of tht
~ ll::i~~lrol b<»< · thl’ speaker$ · theAC..claptor
Fordetailson the «fleet!; of contact with the human body from the mobile phone
or other wirekass d, vic:.,scoon.,ct, dtot he unil, reftr
loHwinstructionmanualofth, wi ” l” »doic·
For customers in the U.S.A.
NOTE Thisunithasbeentested andloundtocomptywilhthtlimilsforaClassBd i9itald”
vict,pur$u.an tto PartlS of the FCC Rulu. Thes· Wm its a”‘ desiln· d to
provid, rnsonab l· protection a11ainst harmful interfe,..nce in
a,..sidentialinstallation.Thisunit generates.
us.es,andcanradiateradiofrequency
:~: : ,: ::~ ~ ni~·:~!!~t:.~t i,ccordanc” with tt-.. instructions, may
caust harmful 0
However, thereisooguaranteethatinterference willnot occurinap;,rticula
rinstallation. lflhisunil doe scau,;e harmful interference lo
radioortelevision receptlon . whichcanb,,determ inedbyturning the unitoff
andon, 1he us,,ris ., ncou@gli’d to trytocorr” ct th1’interf,i rl’ n<i t,yone
ormor,eofthe fo llow i”llmeasures · Rrori.,nt0< relocat1′ th.,
r…:eivingant,>nna · lncr«asethes«p;,rationbet.wintheunitar>dreciivir. ·
Conn.,ctth,unitintoanoutlet onadrcuitdifforentfromthattowhi<hthe”‘”‘iveriscomw
ct..d · Consultthedu lt , o, ..ntxperitne@dradio/TVt.ech ni< ianforht ~
Propertyshltkl.,dandground<tdcablesandcor.ne<:tor$mU$t laus.-:lforconn”
cliontohostcomput,ef$ and/or periphu als in o rdu to meet FCC “mission ~m ils
Thisd .,vk” complili’ s with pan 1Sof the FCC Rulli’S. Ope,ation is subject to
thli’ fo llow ing two conditions (1) Thisdi vi<e maynotcausl’ harmful
interferenc”, and (2) 1hisdevice must acc, pt anyint, rterenc,
r,,ceiv<“d.includingint.. rfe”‘nce thatmaycau-.eur>d,siml ope@tion
llyouhavt ar;yquestionsaboutthis product V i s i t : h t t p s : / / w w w .
~.c o m / el” ‘tr on ic s / s u p p o r t Contact : Sor;yCustomt
rlnformationSer’llic,Ctnte r at 1·800·222·7669
~;:’J:li~c:~~on ol Conformity
Model : YY2080C Responslb l, Pllrty : SonyE.,ctronicslnc Ad-Oress
:16S3SViaEsprillo, San0iego.CA92127US.A Te~ phon,Numt,,,,BSB-942-2230
Youaricautionedthatar;y
changisormodificationsnotexpresslyapprovedinthismanualcouldvoid
yourauthoritytoop,,ratelhisunil
ThisunilmU$1notlaco·locatedoroperated,nconjunctionwilhar;yothtr_.nt·
nnaortrans,n itttr
This unit complies with FCC radiation exposure limit!; s-o t forth tor an
uncontrolled environment and meets th, f’CCradiofreq ue ncy
lRFJExpo,u”‘Guidelin es. Thisun it shoukl b,, lnstllledandoperated keeping
thle ,adiato, at lust 20 cm or more awav from person’s body.
Compli anci withF<:Cr,iquir” ml’ nt 15.407(c) Data transmission is always
initial<ld by software, which is p;,SSli’d down lhrou,;,h the MAC, l hrou,;,h
the dig itil andanalogbas..band, andfinaltytoth· RFch ip. S, vua l
sl>”cialpacQtsa,., inilialtd bylh, MAC Thes«artth., ontywayslht digrta l
bastbandportionwillturnonthtRFtransmitter,whichil l henlurns off at the ” nd o
f the p;,cktt. Th4 ” fo”‘, !ht tran$mil!Er will la on onty whilt on, of th,
afor,im· nliorwd p;,cketsit laingtr.onsmitted.lnotherwords,thitun it
shallautoma ticaltydisconlinut lransrnissionin ca… of eitht rabsenc, ofin
forma tion to transmitoro1>”ralion1>l failu”‘
Frequencylolerance : ~20ppm
For customers in Canada
This unitcontiinsli<ence-ex, rnpttransmitter(s)Jreceiver(s) that
comptywithlnna.atlon.S< “‘ nce and : :~:::~’.”‘v,i lopnwnt Canada ‘s lic,i
nce~xl’ mpt RSS(s). Operation iswbject to thl> following two
(1) This.un ilmaynot,auS<1 intl’ rfer1mcQ;and (2)
Thisunitmustacceptanyinl<lrfirence ,
indudin,;,interferencilhatmaycauseundesiredop,;, ration oflh,un it
This unit compl ies with ISEO radilllion , xpo5u”‘ limits st ! forth for an
uncontrollo,d environm, nt and meetsRSS·102ollhelSEOradiofrequency lRFI Exposu
re n.ales.Thisunit shouldbeinstalledand ~””t” d lc.t plng th” radiator at
l.ast 20 cm or mo,. away from l)<lr5on’s body.
S1.0 MHz-5350MHzbandis restrictedto indoor o !>” rationsonty
Oata transmission is always initiat·d by soflwa,., which is passed down
through the MAC, through th· d i,;,italandanalo,;,baseband,
andfinallytothiRFchip.Sivera l sp,;,cialpackitsa,einitiaW d bylheMAC . The st
artth., ontywaysth, dig rta l ba”bandportionwillturnonth·RFtransmitter,
wtiichil t~nturns off attheendof th4packet . The,_fo,., lht
tr..nsmrtt,,rwillbeonontywhilt ont oftht afor,ime nlio,wd packets is bein11
t.,,n,mltted. In other words, this un it shlll l automa tically discontinu·
t””nsmission in ca… of eithtra bsenc· ofin forma tion to
trMsmitoro1>”ration11l fai lu,-
Mounting the Speakers on a Wall
Note · Mace sure to u-.e th, supplied wall moun ti ng brackets when mount ing
the speakers on a wall, and
do not mount the s~akers on a wallO i, ectly. The tem!>”ratu”‘ inside th, ~
akers ri~ s consid..,abty. anditmaycau,;., dam”‘,l” ormalfunction · Prepa
r«screws (notsupplied] thata risuitibleforthi!wallmaterialandstability.
~p,;,ndingonthe wall material, tho wall may be dama11·d · Fastenth e sc rli’
wss,icu,., tyint hl> wallbeam ·
lnstillthewanmountin,;,brackethorizontiltyonlhirli’inforcidwall. · Hav.,
th4installationdon· byaSonydol· rorlk”nstdcontractorandpayspecial
atlenliontosafety dufing l ~ inst,il lalion · Sor;yshallnot be h· klru por,s
ibl, foraccidentsordamagtcaustdbyimproperirr..tilla tion,
insufficientwallst,ibility, imprope,scr.,wlnst,illa tion.n.oturald isaste rs,t
tc · Do not pt.,”‘ th· s,>1a~ rs righ t below th· “‘ilint;1 so M not to block
the sound output from the top ofthesp,,akers · Donotpl.1c, meta l
objectsnearth, sp,,a kers. Wi,elessfunclionsmayt>ecome unstab”‘ · Donotplace
anyobstaclebet.wen thespeakef$
1 Prepare16«rtws (notsuppl ie d ) thata,. suitibltfortht holes otth,
wallmounlin11bracket
~ 4 m m (3/16in] ~ Mo re thlln30mm (13/16in)
2. Rli’mo,,ith,i co,eronthi! rearofthli’ speak,i r. First, op,m the cover
downwa rds. Nl<XL rimo,« thi screw with a screwdrivir and then the cover
Kee p th, cove r lhathast>eenrema.e0instep2foru~ whenyou0onolmountth e
speakeron a wall
4. ConnectthiACpow.rrcord (ma insl<.ad ) for thespeaker (suppliid )
tolhisp,iakir. Fix the pow”cordconn· ctedtothe$p,,akerinthe cablt holde r
ont~bottomofthe s!>”aker
~ ·:,: ~,..,,, S. ln-.ertthepinsofthe wallbracket (L) and (R)(supplied) inthe holesofthe commonba-.e (supplied] to ass,,mbll’ th” wall mounting b@cket w,,,,,~,,, 1, 1
~ ommooM~
Pins
~liJ
6. Oecide the wal l moun li n11po5ilionoftt-.. speake r andinsta ll the wa ll mounlingbracket lha t had be,i nass.>mbl1i’Oinst,ip5inthat pos ition lnstallthewallmount ingbrackithorizonta ltyonthiwall. Usethe4scr«ws lnotsuppl ied ) thathavi laen pr’1pa r~ in st,ip 1 to install. Whtn you insta ll the wall mounti”II bracke hold it down to avoid droppin11thewallbrackit.
7. Confirmthetype ofthe speakers Checkthe lab,, l onth , bottomof th,
sp@akerlomake su,., itm.. tcheslh~ instil llr tionpOSilion · FRONTL: Frontleft
: ~~~ItR!:’~f~,;, ht · REAAR: Rearright
8. Ha”lllh· sP<1akuon th·wallmountin11 bracket Ha”lllh, wallhookon th·
rta,oflh· sl>” ak<lronth·braclc.t
9. Alignt he pos ilionsofthe screwholesonthe bottornofth,sf”‘a kerandholn
ofthe wa ll mounling
brack,it, then fix m., sl}llaker to thle bracl<.-t t,y faswning tlw scr,iw;
($upplil’d )s.,,u,.,ty.
Wall moun li “llbracke t
~
10. Connec:t tht AC powu cord (main · lt ad ) conn@Ctid with th, ‘
Licenses · Dolby, Dolby Vision , Oolt,y Atmos, and the doub.,·O ~ymbol a”‘
register,,d trad emarks of Do lby
LaboratonesUcensingCo,poralion Manufactu~d under licen-.e from Dolby la
borato,., s. Confid entilll unpublished works Copyright 0
2012-20Z1Dolbylabo@tories. All rightsr,i sli’ r’IIQd ·
For0lSpatents,seehttp://patenl$.dts.com. Manufactu”d under li”‘nst from OTS,
Inc. OTS, OTS:X. and 11,. OTS:X logo a”‘ ,.,giste”‘d trademarksor
tradli’marksofOTS, lnc . inthiUnitedStal<lsandoth«rcoun tries.0 20ZlOTS, lnc.
All RIGHTS RESERVED. · Thisproductconta inssoflwall!th.a t Sonyusts undt
ralict nsinga9ret m” ntwith theowntrof its (opyright. W· ar. obligated to
announc· th” rontents ofth” agru m· nt to customer$ undu :i~;;:!:t:~
rc~~:pyrigh t for th· sottwa,. Pio”” acct ss th, following URL and
https://rd1 .sony.nel/help/hl/sl/23c/ · Thesoftwareinc
ludedinthisproductcontainscopyrighledsoftwar’1thatislicen~dunderthe
GPULGPL and othe r licen-.es which may require l><<“SS lo sou rce code. You
may find a copy of ~’;:Lrelevantsource codeasrequiredunder the GPL/LGP.
(andother licen-.es) atthefollowi”II
You may obta in the sourc,i cod” as r,equi red by th,;, GPl/ LGPL on a phvskal
medium from us for aperiodof thrie y~arsaflerour
lastshipmentolUlisproductbyapplyir,,;,throUlhlhiformat the following URL
Thisofferisvalidtoanyonein receiptofthis infofmatlon.
https://oss.sonv.nel/Producl$/Uno.u./ :~a~::: that Sony cannot answer or
r’1SPOnd to any inquiri”‘ r’1gardin11 the content of this
· The SpotifySoflwafl:liS:;ubjecttothirdpartyli<· n~ sfoundh, ,.. httpt
://www.spotify.com/con n,ct/third·party·lict nsts
Disclaimer regarding services offered by third parties · s,
,..icesof~redt,ythirdparties may la changed,suSl>”nd, d, orterminatedwithou
tprior
nolict. Sonyd~ s notlaarany responsibility lnthtst sortsofs itu.alions
Precautions
· 8etore0pi ratin11 theuni1.check lhatttwoperatingvo ltag«is id entica l toyourbca l powersuppty.
Th, operali”ll voltlgtisindicai.donthe nam, pl.1t~onlh· bottornofth, unit
· Th t supli
., dACa
a ptorisd
ts ign · d ” XdU$iv
lyfor
l hi s unit.lshod
la ustdincorb<a
withanyolh”‘ d”vices
· Thtsuppli.,dACpowe r cord lmains l.,ad ) isdu igntd exdu,;ivt lyfor lhisunit.ltshouldnotbtused
incombinationwithar;yothtrd.,vk” s.
· Completetydisconnect theACadaptorfromthe ACoutlet (mains) ilitisnotgoingtot>eu-.e dfor’!ln
extended l>” riod oflim e. When unplllJ,;iing tt-.. AC adaptor. t,,, su re lo ,;,rasp ii by its adaptor ~ection
not by i15cord
· Completely disconnect the AC po_ , cord (mains lead] from the Af:. ouU, t (mains) ifil is not 11oin11 to
bl,, !M’d for an ext<1 nd<1d period o f tim.,. When unplug11ing thle AC pow., rcord (mains ll’ad]. alwavs
g ripthl>plug.Nevli’ r pullth” cord i15<1lf.
· ACpowercord (mainslead ) mustbechan11«donlyataqualifieds« rvkeshop
On p lacement
· Shouldar;ysolidobjectorl,qu
idfallintotheunit.unplugtheunitandhaveitcheckedt,yqual ifted f”‘ r5onnel
t>efo~ ope, atingitanyfurther
· ~ ~ ~ ~: ~:nit nur hleat sources or in a placl’ subj,ict todir<1 ct sunl
ight, ,ixc,issiv<1 du,;t. or
· : ~, ~n:ka”,~i°f this unit are not ofm agn.,tical lysh l<. ld,id type . Do
not placli’ magmatic cards on the
· Do not pli,c· metal obj”‘ts other than a TV a,ound the unit. Wire”‘ss
functions may t,,, unstabl· · Althoughtht unith,al$upduringoperation,thisis
notamalfunction · Pilrce tht unit ina locationwithad, quat~v, nti
lalie,ntop,..vent heat buildupandprolong th, life of
the unit · Ust cautionwht nplacingth, unitonasurfac” thathas la”nspecialtytr”
at” d (withw.>:..Oil,polish,
o:. ]. asstiining ordiscolorationoflhtsurfa”‘mayrtsult
Howtocarefort heunit · Ckeanlhiun itwilhasoftd,vcloth.Donotusi
ar;ytypeofabrasivepad,scouringpowder,o, solvent
suchasalcoholorlanzin· O n BLUETOOTH8 communications · Microwavis«rnitting
from a 8LUETOOTH div ice may affect Ihle op,;,ration of i lectronic medical
:~:~:~d;~;:n off this unit ar>d ot!ier BLUETDOTH d i vic” s in the following
locations, as it mav caus<1
– in ho:.pitils,niarpriorityseating
intrains,bcationswherllinllammabl<.gasispresintnear automaticdoors,
orn.,arfi,. alarms
Notes on transferr ing/disposing · ~sureto resetlhe unitd el, ting private
informalionand -.ettin11 informaliont>efor, trans~ rrin11 /
diw<><ing lftheunitistransterr,dordispo5edw ithou l
ri<eltin11,prival<linformationmayt,,,,insp,;,ctidbya third!>”rsonandabus, d
fordeti ilsofthe re»tli ngmethod,refertoH,lpGuid,.
Other notes · Di1abl ing the (Au to Standby I function mav incr,eaS<1 thle
powli’ rconsumption be<:auw the product
wil lno tturnoffautorna ticaltywh,innotbe ingused. · Whlen connecting Ihle
unit to the lnl<lrr1′>1. us« !hi router IAOS L modem or Optica l line term
ination
dli’vk,i withthe rou t,i rfunctlonsuppll<;,dw~hthe lnternetprovider, orWi·
Fiacces5poin1]. lf you connictto ttwlntem«twithoutus in,;,Ulerouter.
asecurityproblemmayoccur. ll youarinotsu,. th atth·walloutietforthe nttwork
lin., hasth., rou t·r function, askyollfmanag” rofth., apartm, nt houstor
lnl<lrnetprovider. · lfyouhavt anyqu.slionsorprobi..msconcuni”ll l
hisunitthatar’1notca.t red,nthismanUlll, plostconsult yourn,a rtst Sonydta l·
r
Trademarks
· LOACandlOAClogoa”tr..dema,ksotSonyG,oupCorpor..tior,oril$affiliatt s. · Th,
8LUETOOTH · word ma rk and lolOS are re11 istu,d t””dt marks own· d t,y 8 Iue
tooth SIG, Inc. and
anyu,;eof:;uchmartsbySor;yGroup(orporalionandit!;subsidiaries isunderlicense ·
The terms HOMITM. HOMI High-0,.,finition Multimed ia Interface. HOMI Trade
dress and th, HOMI
lo,;,os a,., trad,imarks or regist<1 r,ed trademarks of HD Ml Lk,insing Adm
inistrator, Inc · Wi-Fi·. Wi-Fi Protected Access· and Wi-Fi Allian<“· arf reg
istered trademarks of Wi·A Alliance · Wi-Fi aRTlf’IEO TM. WPA'” . WPA2 TM. and
WPA3 TMa~ trademarks ofWi-Fi Alliance · SpotifyandSpotifylogosa,.,
,egisrnredtrademarksofSpotifyAB.·
· Spotifys«rvic,i may not bi availabl<. in Wmi countries/re,;,ions . Pleas«
visit support.spotify.com for more in formation
All otholr t,ad«marks and ri,;iisl<lred trademarks are trad«marks or
registered tradema rks ofth«ir rtSP”ctivt hold· r$.lnthismanual, TMand ·
marksa”‘ notsl>”cifi· d
Specifications
Speakers (YY2080C2/YY2080C3/YY2080C4/ YY2080CS)
The followi”lld” scriptionsa rethe speciflcations perspeaker
Amplifiersl!’Ction U.S.models POWER OUTPUT ANO TOTAL HARMONIC DISTORTION
Topspeaker With 6 ohms lo..cls. both chann elsdrN, n. from 600 Hz· 20 kHz:
rated 20 WI>”· channel min imum RM$ power in ste”‘o modf . with no more than
1% total ha rmon ic di~torlion from 250 mW lo rate d output Tweeter: With 6
ohms loads, both chann,ilsdriven, from g kHz· 20 kHz; ratli’d 20 W per
channli’ I minimum RMS power in stereo modi , with no mori than 1% total ha
rmonic distortion from 250 mW to rate-d output Mid rang, speaktr With 6 ohrm
lo..cls, both chann., lsdrNen, from 4SO Hz· 1 kHl ; rated 20 W I>” ‘ chann,I
minimum RMS power in ste,.,o modt , with no more than 1% total ha rmonic
distortion from 250 mW to rated
~ : ~ 1·.
With Sohms loa ds, both channels driven, from 1S0 Hz · 450 Hz ; rated 2S W pe
r channel minimum RM$ powu in stereo mod·. with no more than 1% totil ha
rmonic distortion from 250 mW to rated
1 Can~~?~ mod, ls POWEROUTPUT (rated )
Topspeaker:2SW (at6ohm$,lkHz,1%THO I Tw,;, <1ter:2SW lat6ohms,10kHz, 1% THO)
Mid rangesp,;,al<er: 25W (at6ohms, 1 kHz. 1%THO) Woofer:2SW latSohms,100Hz,1
%THO I POWEROUTPUT (rete,, nc” I Topsp.ak., 3lSW (at6ohm<.1kHz ) Tw,etu:31 .SW
(at 6ohms, 10kHz) Mid rang, speaktr: 31.SW (at&oh ms, lkHz ) Woot..r:31 .SW
(atSohms,100Hz)
F>,;:,mrrequirimin!S 120VAC, 60Hz
f>,;:,~~:c;:mplion
~:~~:o;~; :~10~;;;~ss · Whenyoup,..ssandholdthe LI NK fo r
2secondsormoreandthenrelea-.eyourfinger, the
Sf”‘ aker shifts to the po- roff mode and th, powe r indkator is turn ed off.
Pr, ss the LINK to u ~ th, ~akeraga in Oimensions· (approx. J(w/h/d ) Speaker
289 mm x27Smmx S5 mm l111/2in x107/8 inx 21/4 in ) Speakirwilhthetablestand:
289 mm x 306mm x129 mm 1111/2 inx121/8in x S1/8 inl Speakerwithlhtwall
mountin,;,b,aclc.t: 289 mm x279 mm x 73 mm l111/2inx11 inx2 7/8 in) · Not inc
ludingproj4ctionportion Mass (approK ) Speaker· 2.4k11 (S lbSoz l
S!>”alc.rwiththetabl” stand 2.6kg (S lb12oz) $peakerwithth e wal l moun lin
11bracket 2.7kg(Slb16oz)
Control Box (YY2080C1)
HDMJ section Connector
Tv!>” A (111pin)
LAN section
L A ~ g : t·t ~ ; t ; ~ r m i n a l
Wireless LAN section Commun icationsyStem
IHE802 11a/b/g/n/ac Frt qu.ncyband
2.4GH,. SGH,
BLUETOOTH section Commun icationsvswm
8LUETOOTHSpecification v.ir$iOn5.2 F”‘q u. ncyband
2.4GHzband l2.4000GHz ·2.483SGHz)
f>,;:,wli’ rrequirli’ ments OC12V (using th«supp liedACadaptorconnect~d
toM:.120V60 Hz power supply)
f>,;:,werconsumption On : 13W (Network/8IwtoothStandt,y]iss«ttoON : 2.8Wor
l«ss (Network/BIU<:”toolhStindt,y]is settoOFF : O.SWorless’ ‘ When iStandt,y
Through]is s..ttoOFF, or (Stondbylhrough ) itsetto[Auto) whilt the conntcttd
TViStumffioff.
Oimtnsions· (..pprox. )(w/h/d ) 160 mm x S6 mm x160 mm (6 3/8 in x 21/4 in x 6
3/8 in) · Notinc ludingp,oje ctionportion
Mass (approx ) 770g (1Ib12oz)
Wireless Transmitter/Receiver Section
Communication system Wir,i l<;,ssSoundSpec ificationv” f$ion4 .0
Fr~qu«ncy band SGHz
Included Items
Controlbox (1) SP”ak4’r IFRONTLl(1) SP<laker lFRONTR)(1) Speak4’r IREARL )(1I
Spe aker lREARR)(1] RemoteContro1 (1I R03 (size AAA) batt.. ry (2) Commonbase
l4 I Table stand .,g )BI Tab., standsc rew lBI Wa llbrackl’1(L)(4I Wa
llbracket (R)(4 ) Wa llhook (4I Screw (BJ HOMlcable(4K,
8Ktransm;ssionsuppo;ted](1) TV center s,>1 ak<lrmodt cabltl1) Docum,nts (1sel)
ACad..ptor (AC·Ml21SUC )(1) ACpoW<t rcord [mainsl·ad] forlh· speaku (4 )
Oesignand sp,,cifications are subjecttochang,withoutnotice
dtsx
COMPATIBLE WITH
H Dolby Vision
!LDACI H Dolby Atmos
@!) ( espotify 1
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Model: YY2080C
Install the application on your smartphone and follow the directions on the
application to set up the speaker system
To use the speaker system with all the available functions and improved
performance, update the software of the speaker system and the “Sony | BRAVIA
Connect” app to the latest versions. HT-A9M2
How to Use/Parts and Controls About the App Required to Use the Speaker System
Devices That Are Connected to the Speaker System About the Help Guide
Description Parts and Controls
1
Control Box Speakers Supplied Remote Control Remote Control Screen on the App
Initial Setup Installing the Speaker System
Installing the Control Box and Speakers Installing the Speakers on a TV Stand
and Shelves Mounting the Speakers on a Wall
Connecting to a TV If Your TV Has the S-CENTER SPEAKER IN Jack Connecting an
AV Device Connecting to an AC Outlet (Mains) Performing Initial Setup with the
“Sony | BRAVIA Connect” App If the Speakers Are Not Connected Correctly
Listening to Music/Sound Listening to TV Sound Playing the Connected AV Device
Adjusting Sound Quality Listening to Music/Sound with the BLUETOOTH® Function
Listening to Music by Pairing the BLUETOOTH Device that is Connected for the
First Time Listening to Music from the Paired BLUETOOTH Device
Setting the Wireless Function to On or Off Enjoying 360 Reality Audio
About 360 Reality Audio Playing 360 Reality Audio Content from the Connected
AV Device
Enjoying Music on a Network Using Spotify Using AirPlay
2
Using the Speaker System by Interlocking with a TV Operating the Speaker
System by Interlocking with a TV (Control for HDMI Function) Operating the
Speaker System by Interlocking with a TV Compatible with the “BRAVIA Sync”
Function Changing the Settings with the App [Wireless Speaker Settings] [Sound
Settings] [HDMI Settings] [Bluetooth Settings] [System Settings] [Network
Settings] [Easy Initial Setup] [Software update] Saving Power in Standby Mode
Troubleshooting Troubleshooting Resetting the Speaker System Additional
Information Specifications Supported Audio Formats Supported HDMI Video
Formats Trademarks Licenses Notes on Use Customer Support Website
5-049-832-11(2) Copyright 2024 Sony Corporation
3
Help Guide
Home Theatre System
BRAVIA Theatre Quad
About the App Required to Use the Speaker System
Use a smartphone with the “Sony | BRAVIA Connect” app installed to perform
initial setup and operations as well as configure the settings on the speaker
system. Install the “Sony | BRAVIA Connect” app on your smartphone.
An Internet connection is required to use the speaker system. To use the
speaker system, connect the smartphone on which the app is installed to the
same network as the speaker system.
The app allows you to perform the following operations and setup.
Initial setup of the speaker system, including network connection, surround
sound optimization, etc. Operations such as volume adjustment, input
selection, etc. Change the settings of the speaker system to the desired
settings Connect the supplied speakers and optional subwoofer and perform
initial setup Update the software of the speaker system to the latest version
Check the support information and latest update information
The supplied remote control can only be used to perform operations and change
settings that are frequently used when you view content.
Note
An account and sign-in are required to use the app.
If you do not use the app or the speaker system for more than 30 days, you may
need to re-register the speaker system on the app.
Related Topic Supplied Remote Control Remote Control Screen on the App
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001053982
4
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Devices That Are Connected to the Speaker System
The speaker system supports object-based audio formats such as Dolby Atmos and
DTS:X.
Wireless LAN router Internet TV The speaker system can be used to play TV
sound by connecting the control box and TV using an HDMI cable. Listening to
TV Sound AV device (Blu-ray DiscTM player, set-top box, cable box, satellite
box, gaming console, etc.) The speaker system can be used to play AV device
sound by connecting the control box and AV device using an HDMI cable. The
speaker system can also play the sound of an AV device that is connected to
the TV. Playing the Connected AV Device Control box Connect a TV or AV device
to enjoy sound through the speakers that are connected wirelessly. Supplied
speakers Connect wirelessly to the control box to play the speaker system
sound. Optional subwoofer By using the app, optional subwoofers can be
connected with the speaker system and configured. For the supported optional
subwoofers, see the Sony website. Mobile device
5
The speaker system can be used to play mobile device sound by connecting the speaker system and mobile device using the BLUETOOTH function. The speaker system can also be used to stream music by connecting a mobile device to the same network as the speaker system. Listening to Music by Pairing the BLUETOOTH Device that is Connected for the First Time
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001053981
6
Help Guide
Home Theatre System
BRAVIA Theatre Quad
About the Help Guide Description
About the description of operations
This Help Guide explains operations based on the following assumptions. Both
the speaker system and the “Sony | BRAVIA Connect” app have the latest version
of software. The speaker system is connected to a TV that is compatible with
eARC or ARC using an HDMI cable, and the Control for HDMI functions of the
speaker system and TV are enabled. The setup of the speaker system and TV(*)
has been completed on following the “Sony | BRAVIA Connect” app screen.
- If you are using an app-compatible BRAVIA, both the speaker system and BRAVIA can be controlled with the remote control screen on the app. If you are using other TVs, only the speaker system can be controlled with the remote control screen on the app.
About the wording displayed on the app
The letters in [ ] (brackets) indicate the wording that appears on the “Sony | BRAVIA Connect” app screen.
TP1001669358 5-049-832-11(2) Copyright 2024 Sony Corporation
7
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Control Box
Front
1. Status LED
Indicates the speaker system status. Flashing in blue: Registering the speaker
system. Flashing slowly in white: Initial setup is not complete or the speaker
system is not connected to a network. Turned off: Initial setup is complete
and the speaker system is connected to a network.
2. Remote control sensor
Use the supplied remote control while pointing it at the remote control sensor
on the control box to operate the speaker system.
3. Front panel display Rear
1. S-CENTER OUT jack 2. (Power)
Turns on the speaker system. If you press this button when the speaker system
is turned on, the speaker system is set to standby mode. Press and hold this
button for more than 10 seconds to reset the control box.
3. LAN(100) jack 4. HDMI OUT (TV eARC/ARC) jack
8
Use an HDMI cable to connect a TV that has an HDMI input jack. The speaker
system is compatible with eARC and ARC. ARC is a feature that sends TV sound
from the HDMI jack on the TV to an AV device such as the speaker system via an
HDMI cable. eARC is an advanced version of ARC that enables transmission of
object-based audio and multi-channel LPCM content that cannot be transmitted
with ARC.
5. HDMI IN jack
6. DC IN terminal
Related Topic Connecting to a TV If Your TV Has the S-CENTER SPEAKER IN Jack
Connecting an AV Device Connecting to an AC Outlet (Mains) Resetting the
Speaker System
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001053980
9
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Speakers
Front
1. Power indicator
Indicates the speaker’s connection status with the control box and whether the
speaker is on and off. Green Lit up: The speaker is connected to the control
box. Flashing slowly: The speaker is attempting to connect to the control box.
Flashing twice repeatedly: The speaker is attempting to connect to the control
box after LINK was pressed. Follow the instructions on the app. Red Lit up:
The speaker is in network standby mode(*).
- The speaker maintains a connection with the control box and can be activated by interlocking with the control box.
Amber Flashing/lit up: The speaker is updating its software.
Turned off The speaker is turned off.
2. AC inlet 3. Cable holder 4. LINK
When the speaker is turned on:
10
Press: Press this button when the control box and speakers do not connect
properly with the “Sony | BRAVIA Connect” app. Follow the instructions on the
app. Press and hold for 2 seconds: Turns off the speaker. Press and hold for
more than 10 seconds: Resets the speaker.
When the speaker is turned off:
Press: Turns on the speaker.
5. Speaker fixing hole
Rear
1. Hole for wall hook attachment/hole for the general speaker stand
Note
Remove the hole cover to use the hole. Keep the hole cover and the screw
behind the cover for use when you do not mount the speaker on a wall or stand.
Sony shall not be held responsible for accidents or damage caused by improper
installation, lack of installation strength, misuse, or natural disaster.
Related Topic Connecting to an AC Outlet (Mains) Resetting the Speaker System
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174823
11
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Supplied Remote Control
1. INPUT (Input)
Used to select the input for playback on the speaker system. Press the button
to display the currently selected input. Press the button again to select the
input. The input is switched each time you press this button.
2. (Power)
Switches between power on and standby on the speaker system.
3. SOUND FIELD (Sound field)
Turns on/off the surround sound effect on the speaker system.
4. VOICE (Voice mode)
Turns on/off the voice mode on the speaker system. When a Sony TV compatible
with the linkage function of the speaker system is connected, the voice zoom
is turned on/off instead of the voice mode by selecting TV input on the
speaker system.
(Volume) +(*)/
Used to adjust the volume of the speaker system.
6. NIGHT (Night mode)
Turns on/off the night mode on the speaker system.
7. (Muting)
Temporarily turns off the sound on the speaker system.
8. BASS (Bass level) +/
Used to adjust the volume of the bass sound or optional subwoofer.
(Volume) + has a tactile dot. Use it as a guide during operation.
12
About the replacement of batteries for the supplied remote control
If the speaker system does not respond when operating with the supplied remote
control, replace the two batteries with new batteries. Use R03 or LR03 (size
AAA) batteries for replacement.
If the remote control does not work properly
Point the remote control at the remote control sensor on the control box.
Remove any obstructions between the remote control and the control box. Check
that the + and – of the battery are in the correct orientation. Replace both
batteries in the remote control with new ones if they are older batteries.
Check that the correct button on the remote control is being pressed.
Related Topic Adjusting Sound Quality
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001053979
13
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Remote Control Screen on the App
There are two types of remote control screens on the app.
Remote control screen that can only operate the speaker system
This screen is displayed when a TV that is not compatible with the app is
connected using the HDMI cable.
Remote control screen that can operate the speaker system and BRAVIA
This screen is displayed when an app-compatible BRAVIA is connected using the
HDMI cable. The following items that can be used to operate the speaker system
are displayed in [Remote], [Picture & Sound], [Audio output], and [Settings].
If the TV is not turned on, a remote control screen that can only operate the
speaker system will appear.
Items on the remote control screen on the app
Playback information/input switching area The currently selected input, etc.
appears on the upper part of the screen. The following information and
operations are displayed by tapping this area.
Playback meta information: Name, artist, album, length, etc. of the song that
is currently playing. Stream Info: Input signal frequency, etc. Audio format:
Audio format of input signal (Dolby Atmos, DTS, etc.), number of channels,
etc. Name of the BLUETOOTH device connected to the speaker system Playback
controls for the BLUETOOTH device Input selection(*)
- When a TV compatible with the app is connected to the speaker system using an HDMI cable, TV input can also be selected.
[ (Power) ] Sets the speaker system to standby mode when this is tapped while the speaker system is turned on.
[Night mode] Turns on/off the night mode on the speaker system.
[Sound field] Turns on/off the surround sound effect on the speaker system.
[Voice mode] Turns on/off the voice mode on the speaker system.
[Voice Zoom] This function is enabled when a Sony TV compatible with the linkage function of the speaker system is connected. When TV input is selected on the speaker system, the voice zoom works instead of the voice mode.
[Volume] Used to adjust the volume of the speaker system.
[Rear level] Used to adjust the volume of the rear speakers.
[Bass level] Used to adjust the volume of the bass sound or optional subwoofer.
14
[Audio] When a dual audio (dual mono) signal is input to the speaker system,
the audio you want to hear can be selected.
[Viewing Position] The sound field can be optimized according to the viewing
position. This function cannot be used if the viewing position is not measured
accurately by the initial setup or Sound Field Optimization.
- Displayed by tapping [Settings] – [Sound Settings] – [Sound Field Optimization] on the remote control screen on the app.
[Settings] Used to configure the settings of the speaker system.
Note
If the control response is poor, check the Wi-Fi connection between the smartphone and the speaker system.
Related Topic Adjusting Sound Quality
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001669359
15
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Installing the Control Box and Speakers
1 Choose an installation method for the control box and speakers. They can be
installed on a TV stand or shelves, etc. or mounted on the wall. Example of
speakers installed on a TV stand and shelves:
Example of speakers mounted on the wall:
Note
Do not install the speakers in a cabinet or directly under the ceiling. Doing
so may obstruct the sound output from the top of the speaker. Do not place
metal objects near the speaker system. Wireless functions may become unstable.
16
2 Choose an installation position.
1. Install the control box on or in a shelf where the front panel display is
not covered. 2. Determine the installation position of the 4 speakers by
checking the labels on the bottom of the speakers.
For better surround sound, install the 4 speakers to surround your listening
position and install the front speakers on the left and right sides of the TV.
Control box Bottom of the speaker Front left speaker Front right speaker Rear
left speaker Rear right speaker
Note
Before connecting the speaker system, disconnect the AC power cords (mains
leads) of the TV and AV devices from the AC outlets (mains). Reconnect the AC
power cords (mains leads) to the AC outlets (mains) after connecting the
speaker system to the TV or AV devices. If the installation position of the
speakers or the arrangement of the room has changed, reoptimize the sound
field by accessing [Settings] – [Sound Settings] – [Sound Field Optimization]
on the remote control screen on the app.
If the sound from the speakers skips
This may be improved by changing the installation positions or settings of the
speakers.
If you feel that the TV screen is out of alignment with the position from
which you hear dialog, etc.
If there is a large difference in the distance between the TV and the front
left speaker and the TV and the front right speaker, accessing [Settings] –
[Sound Settings] and performing [Sound Field Optimization] on the remote
control screen on the app may improve this issue.
Using with an optional subwoofer
If you have not yet started setting up the speaker system, use the “Sony |
BRAVIA Connect” app to start the setup. During the setup process, the app will
guide you in connecting an optional subwoofer. No sound is output from the
subwoofer if the setup is not completed on the app. If you have already
completed the setup of the speaker system, check [Settings] – [Wireless
Speaker Settings] [Wireless Speaker Connection] on the remote control screen
on the app.
17
If the sound from the optional subwoofer skips, this may be improved by changing the subwoofer installation position or settings.
Note
A software update may be required when using an optional subwoofer.
If changing the installation method or position of the speaker system or
optional subwoofer
Perform Sound Field Optimization on the app in the following cases.
Changing the position and installation method of the speaker system as well as
the optional subwoofer When changing your daily viewing position When changing
the viewing environment, such as changing the layout of furniture
- Displayed by tapping [Settings] – [Sound Settings] – [Sound Field Optimization] on the remote control screen on the app.
Related Topic [Sound Settings]
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174824
18
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Installing the Speakers on a TV Stand and Shelves
Note
Do not install the speakers in a cabinet or directly under the ceiling. Doing
so may obstruct the sound output from the top of the speaker. Do not install
speakers near metal objects. Wireless functions may become unstable. Do not
place any obstacles between the speakers.
1 Assemble the table stand by fitting the table stand legs (supplied) into the
common base (supplied).
Table stand legs Common base 2 Connect the AC power cord (mains lead) for the
speaker (supplied) to the speaker. Fix the AC power cord (mains lead) that is
connected to the speaker to the cable holder on the bottom of the speaker.
Cable holder 3 Place the table stand assembled in step 1 onto the bottom of
the speaker and secure it with the table stand
screws (supplied).
19
Table stand Table stand screw
4 Check the intended installation positions of the speakers and install the
speakers.
Check the label on the bottom of the speaker to make sure it matches the
speaker’s installation position.
: Front left speaker : Front right speaker : Rear left speaker : Rear right
speaker
5 Connect the AC power cord (mains lead) for the speaker that is connected to
the speaker to an AC outlet (mains).
Related Topic Connecting to an AC Outlet (Mains)
20
TP1001174825
5-049-832-11(2) Copyright 2024 Sony Corporation 21
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Mounting the Speakers on a Wall
Note
Make sure to use the supplied wall mounting brackets when mounting the
speakers on a wall. Do not mount the speakers directly onto a wall. Doing so
can cause the temperature inside the speaker to rise considerably, and this
may cause damage to the speaker or malfunction. Prepare screws (not supplied)
that are suitable for the wall material and stability. The screw may damage
the wall depending on the wall material. Fasten the screws securely in the
wall beam. Hang the wall mounting brackets flat against the reinforced wall.
Ask a Sony dealer or licensed contractor to install the speakers securely with
full consideration of safety. Sony shall not be held responsible for accidents
or damage caused by improper installation, lack of installation strength,
misuse, or natural disaster. Do not install the speakers directly under the
ceiling. Doing so may obstruct the sound output from the top of the speaker.
Do not install speakers near metal objects. Wireless functions may become
unstable. Do not place any obstacles between the speakers.
1 Prepare 16 screws (not supplied) that are suitable for the holes on the wall
mounting brackets. 4 screws are required for each speaker.
(a) 4 mm (3/16 in) (b) Longer than 30 mm (1 3/16 in)
2 Remove the cover on the rear of the speaker. Flip the cover open downwards,
remove the screw with a screwdriver, and remove the cover.
Cover Screw
22
3 Attach the wall hook (supplied) to the speaker. Use the screw that was
removed in step 2.
Screw Wall hook 4 Connect the AC power cord (mains lead) for the speaker
(supplied) to the speaker. Fix the AC power cord (mains lead) that is
connected to the speaker to the cable holder on the bottom of the speaker.
Cable holder 5 Insert the pins of the wall bracket (L) and (R) (supplied) into
the holes of the common base (supplied) to
assemble the wall mounting bracket.
Wall bracket (L) Wall bracket (R) Common base Pins 6 Decide on the wall
mounting position for the speaker and install the wall mounting bracket that
was assembled in step 5 for that position. Install the wall mounting bracket
flat against the wall. Secure the 4 locations indicated with the 4 screws (not
supplied) that were prepared in step 1.
23
To avoid dropping the wall bracket, hold down the wall mounting bracket while
installing.
Screws (not supplied) 7 Confirm the speaker types.
Check the label on the bottom of the speaker to make sure it matches the
speaker’s installation position. : Front left speaker : Front right speaker :
Rear left speaker : Rear right speaker
8 Hang the speaker on the wall mounting bracket. Hang the wall hook on the
rear of the speaker on the wall mounting bracket.
9 Align the positions of the screw holes on the bottom of the speaker with the
holes on the wall mounting bracket, then fix the speaker to the wall mounting
bracket by fastening the screws (supplied) securely.
24
Wall mounting bracket Screw
10 Connect the AC power cord (mains lead) for the speaker that is connected to
the speaker to an AC outlet (mains).
Note
Keep the cover that is removed in step 2 for covering the screw hole when you
do not mount the speaker on a wall.
Related Topic Connecting to an AC Outlet (Mains)
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001053976
25
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Connecting to a TV
1 Connect an HDMI IN jack compatible with ARC/eARC on the TV and the HDMI OUT
(TV ARC/eARC) jack on the speaker system using the HDMI cable (supplied).
HDMI cable (supplied) TV 2 Change the TV settings so that TV sound can be
output from the speaker system. Depending on your TV, this may be set
automatically when the speaker system is connected. For details, refer to the
operating instructions of your TV. 3 Enable eARC on both the speaker system
and the TV. If the TV that is connected to the speaker system is compatible
with eARC/ARC, the eARC function is available. To enjoy higher quality audio
formats such as Dolby Atmos played on an external device connected to the TV,
check that the eARC setting is enabled on the speaker system and TV. eARC
setting for the TV: Refer to the operating instructions of your TV. eARC
setting for the speaker system: The setting is enabled by default.
Note
Check that the connectors are firmly inserted. 26
Enable the Control for HDMI function on the TV. If the Control for HDMI
function on the TV is not enabled, the speaker system does not output TV
sound.
By enabling the eARC function on the TV, some features on the TV may become
limited. For instance, system sounds and voice response may not be output. For
details, refer to the operating instructions of your TV.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174826
27
Help Guide
Home Theatre System
BRAVIA Theatre Quad
If Your TV Has the S-CENTER SPEAKER IN Jack
The TV can output the center part of the speaker system sound if the speaker
system is connected to the TV using the following method.
1 Connect the speaker system and TV using the HDMI cable (supplied). 2 Connect
the S-CENTER SPEAKER IN jack on the TV and the S-CENTER OUT jack on the
speaker system
using the TV center speaker mode cable (supplied).
TV center speaker mode cable (supplied) TV
Note
Check that the connectors are firmly inserted.
Hint
If the TV center speaker mode cable is not long enough, use a commercially
available stereo mini cable.
To output sound from the TV
Access [Settings] – [Sound Settings] and enable [Acoustic Center Sync] on the
remote control screen on the app.
28
Depending on the input, audio signal, or sound field settings, sound may not
be output from the TV. For details, refer to the table below.
: Sound is output from both the speaker system and TV. : No sound is output
from the TV. Sound is output from the speaker system only.
Setting
TV, HDMI input: 2-channel content
TV, HDMI input: Multi-channel
content
Sound field: On and Sound Field Setting: [360 Spatial Sound Mapping] Sound field: On and [Sound Field
Setting](**): [Dolby Speaker Virtualizer],
[DTS Neural:X] Sound field: Off
BLUETOOTH input, music service, AirPlay
- Displayed on the remote control screen on the app. ** Displayed by tapping [Settings] – [Sound Settings] – [Sound Field Setting] on the remote control screen on the app.
Related Topic Connecting to a TV Adjusting Sound Quality [Sound Settings]
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174827
29
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Connecting an AV Device
8K video and high-quality audio such as Dolby Atmos, Dolby TrueHD, DTS:X, etc.
can be played by connecting an AV device (Blu-ray Disc player, set-top box,
cable box, satellite box, gaming console, etc.) in the following way.
1 Connect the HDMI OUT jack on the AV device and HDMI IN jack on the TV using
an HDMI cable (not supplied).
2 Connect the speaker system and TV using the HDMI cable (supplied).
TV HDMI cable (supplied) HDMI cable (not supplied) AV device (Blu-ray Disc
player, set-top box, cable box, satellite box, gaming console, etc.)
The AV device can be connected to the speaker system directly
30
To play 360 Reality Audio content on an AV device, connect the AV device
directly to the speaker system. By connecting an AV device directly to the
speaker system, higher quality audio formats such as Dolby Atmos that are
played on the AV device can also be output from the speaker system, even if
the TV is not compatible with eARC.
1. Connect the speaker system and TV using the HDMI cable (supplied). 2.
Remove the sticker from the HDMI IN jack on the speaker system. 3. Connect the
HDMI IN jack on the speaker system and HDMI OUT jack on the AV device using an
HDMI cable
(not supplied).
TV HDMI cable (supplied) HDMI cable (not supplied) AV device (Blu-ray Disc
player, set-top box, cable box, satellite box, gaming console, etc.)
Note
Check that the connectors are firmly inserted. To view 8K content, the TV and
HDMI cable need to be compatible with 8K. For details, refer to the operating
instructions of the TV. Some TV controls may become limited. For instance,
system sounds and voice response may not be output. Refer to the operating
instructions of your TV. The types and number of devices that can be
controlled by the Control for HDMI function are limited by the HDMI CEC
standard as follows.
Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): Up to 3 devices
Playback devices (Blu-ray Disc player, DVD player, etc.): Up to 3 devices
Tuner-related devices: Up to 4 devices Audio system (receiver/headphones): Up
to 1 device (used by this speaker system)
31
Hint
Use an HDMI cable that is compatible with the video format of the device being
connected, and select the HDMI signal format by accessing [Settings] – [HDMI
Settings] – [HDMI Signal Format] on the remote control screen on the app.
For the supported audio formats, refer to “Related Topic.”
Related Topic Connecting to a TV Playing 360 Reality Audio Content from the
Connected AV Device Supported Audio Formats Supported HDMI Video Formats
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174828
32
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Connecting to an AC Outlet (Mains)
1 Connect the AC adaptor (supplied) and AC power cord (mains lead)
(supplied)(*) to the DC IN terminal on the control box, then connect them to
an AC outlet (mains).
- Except for North American models
For North American models
For other models
AC adaptor (supplied) AC power cord (mains lead) (supplied) 2 Connect the AC power cords (mains leads) for the speakers (supplied) to the AC inlets on the 4 speakers, then connect the AC power cords (mains leads) to AC outlets (mains).
33
AC power cord (mains lead) for the speaker (supplied)
When the AC power cord (mains lead) for the speaker is connected to an AC
outlet (mains), the speaker turns on and the power indicator on the speaker
flashes in green.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001053974
34
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Performing Initial Setup with the “Sony | BRAVIA Connect” App
To set up the speaker system, use the “Sony | BRAVIA Connect” app. 1 Check
that the control box and TV are connected and that the control box and
speakers are connected to a power source.
2 Download and install the “Sony | BRAVIA Connect” app on your smartphone.
3 Open the app and follow the instructions on the screen to complete the
setup.
After the control box is turned on, it is automatically connected to the
speakers and the power indicators on the speakers light up in green. If the
speaker is not connected to the control box, the power indicator on the
speaker lights up in red. Refer to ” If the Speakers Are Not Connected
Correctly ” for how to connect the speaker to the control box.
Related Topic Connecting to a TV If Your TV Has the S-CENTER SPEAKER IN Jack
Connecting an AV Device Connecting to an AC Outlet (Mains)
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001053973
35
Help Guide
Home Theatre System
BRAVIA Theatre Quad
If the Speakers Are Not Connected Correctly
If the speaker is not connected to the control box, the power indicator on the
speaker lights up in red and the instructions for connecting the speaker
appear on the app screen. Connect the speaker to the control box by following
these instructions on the app.
Power indicator
Hint
Check the speaker connection status in [Settings] – [Wireless Speaker
Settings] on the remote control screen on the app.
Related Topic Performing Initial Setup with the “Sony | BRAVIA Connect” App [Easy Initial Setup] [Wireless Speaker Settings] 5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174829
36
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Listening to TV Sound
Operate the remote control screen on the app as follows.
1 Tap the playback information/input switching area on the upper part of the
screen to switch the input to [TV]. If the remote control screen on the app
that can operate the speaker system and BRAVIA is displayed, there is no need
to operate the input switching of the speaker system. The audio input on the
speaker system switches in conjunction with the content being viewed on the
TV.
2 Adjust the volume.
To operate using the supplied remote control 1. Press INPUT (Input) to display
[TV] in the front panel display on the control box. 2. Adjust the volume.
Note
If there is no picture when TV (eARC/ARC) input is selected, select the
preferred TV channel by using the TV remote control. Depending on whether you
turn on the TV or the speaker system first, the speaker system may be muted
and cause [MUTING] to appear in the front panel display on the control box. In
this case, turn on the TV before turning on the speaker system.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054252
37
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Playing the Connected AV Device
Operate the remote control screen on the app as follows.
1 Tap the playback information/input switching area on the upper part of the
screen to switch the input to [HDMI]. If the remote control screen on the app
that can operate the speaker system and BRAVIA is displayed, there is no need
to operate the input switching of the speaker system. The audio input on the
speaker system switches in conjunction with the content being viewed on the
TV.
2 Adjust the volume.
To operate using the supplied remote control 1. Press INPUT (Input) to display
[HDMI] in the front panel display on the control box. 2. Adjust the volume.
Note
If there is no picture from the device connected to the HDMI IN jack on the
speaker system, press the playback button on the connected device.
When there is no picture from the connected device or the picture from the
connected device is not output correctly, access [Settings] – [HDMI Settings]
and change the [HDMI Signal Format] settings on the remote control screen on
the app.
Check that the speaker system is connected to a device that is HDCP (High-
bandwidth Digital Content Protection) compliant. For details, refer to the
operating instructions supplied with the connected device.
If HDR content cannot be shown in high dynamic range, check that the settings
of the TV or device connected to the speaker system. For details, refer to the
operating instructions supplied with the TV or connected device.
Depending on the [HDMI Signal Format] setting, an AV device may not be able to
output HDR content in the HDR format. Access [Settings] – [HDMI Settings] and
change the [HDMI Signal Format] settings on the remote control screen on the
app to accommodate the video format that is supported by the AV device.
If the picture and sound of the device that is connected to the speaker system
are not output from the TV while the speaker system is turned off, access
[Settings] – [HDMI Settings] – [Standby Through] and set this to [Auto] or
[On] on the remote control screen on the app.
Related Topic [HDMI Settings]
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174830
38
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Adjusting Sound Quality
The following sound quality adjustments can be performed on the remote control
screen on the app or on the supplied remote control.
Operating using the remote control screen on the app
When an app-compatible BRAVIA is connected to the speaker system using an HDMI
cable, select [Picture & Sound].
[Sound field] Outputs sound with the surround sound effect. This setting can
be used to experience surround sound with a sense of presence.
[Voice mode] Emphasizes dialog and makes it easier to hear.
[Voice Zoom] This function is enabled when a Sony TV compatible with the
linkage function of the speaker system is connected. When TV input is selected
on the speaker system, the voice zoom works instead of the voice mode. The
voice zoom can adjust only the volume of the human voice without changing the
overall volume. The voice volume of the newscaster can be adjusted to be
louder to make it easier to hear, and the voice volume can be adjusted to be
quieter for live sports broadcasts or other situations where the commentary or
play-by-play commentary is too loud.
[Night mode] Outputs clear sound even at a low volume for late night use and
features clear dialog and minimum loss of fidelity.
Operating using the supplied remote control
Each time you press a button on the supplied remote control, the setting
changes and the setting appears in the front panel display on the control box.
SOUND FIELD (Sound field) Outputs sound with the surround sound effect. This
setting can be used to experience surround sound with a sense of presence.
[SF.ON]: The sound field is set to on. [SF.OFF]: The sound field is set to
off.
VOICE (Voice mode) Emphasizes dialog and makes it easier to hear. The voice
zoom works to adjust the volume of human voices when a TV compatible with the
linkage function of the speaker system is connected. When voice zoom is turned
on, the last adjusted value in the TV menu or remote control screen on the app
will be applied. [Vo.ON]: The voice mode is set to on. [Vo.OFF]: The voice
mode is set to off.
NIGHT (Night mode) Outputs clear sound even at a low volume for late night use
and features clear dialog and minimum loss of fidelity. [N.ON]: The night mode
is set to on. [N.OFF]: The night mode is set to off.
Note
39
The sound field is not available during test tone output.
If [Sound Field Setting] is set to [Dolby Speaker Virtualizer] and the sound
field is set to on, the voice mode is disabled. ()
Depending on the combination of the sound field setting() and content, the
Sound Field Optimization effect may not be applied.
The sense of presence that can be achieved by the surround sound processing
may vary depending on the playback content.
When playing multi-channel audio, check the digital audio output setting on
the device that is connected to the speaker system. For details, refer to the
operating instructions supplied with the connected device.
Some speakers may not output sound depending on the content or sound field
setting(*).
The night mode automatically turns off when the speaker system is turned off.
Check the URL below for TVs that are compatible with the linkage function of
the speaker system. https://www.sony.net/hav_faq
Depending on the TV setting or content, the voice zoom may not work.
- On/off setting of the sound field and the setting displayed after you tap [Settings] – [Sound Settings] – [Sound Field Setting] on the remote control screen on the app.
** Displayed when you tap [Settings] – [Sound Settings] – [Sound Field Optimization] on the remote control screen on the app.
Related Topic [Sound Settings]
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054316
40
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Listening to Music by Pairing the BLUETOOTH Device that is Connected for the
First Time
To use the BLUETOOTH function, the speaker system and BLUETOOTH device need to
be paired in advance. Pairing is the process of registering devices with each
other in advance.
1 Turn on the BLUETOOTH device.
2 Switch the input to [Bluetooth] on the remote control screen on the app. If
another BLUETOOTH device is already connected to the speaker system, select
[Connect to other devices]. The speaker system enters the pairing mode and
[PAIRING] appears in the front panel display on the control box by switching
to the [Bluetooth] input.
3 Look for the speaker system on the BLUETOOTH device by performing the
pairing operation. The list of the BLUETOOTH devices detected by the BLUETOOTH
device appears on the screen of the BLUETOOTH device. For how to perform
pairing with the BLUETOOTH device, refer to the operating instructions of the
BLUETOOTH device.
4 Select the speaker system(*) from the list of devices that is displayed on
the screen of the BLUETOOTH device and register the speaker system and
BLUETOOTH device with each other. If a passkey is requested, enter “0000.”
- BRAVIA Theatre Quad or the device name that is set in [Unit Name].
5 Confirm on the remote control screen on the app that the speaker system and the BLUETOOTH device are connected via the BLUETOOTH function. The name of the connected BLUETOOTH device appears in the front panel display on the control box.
6 Start audio playback with the music app on the connected BLUETOOTH device. Sound is output from the speaker system.
7 Adjust the volume. Adjust the speaker system volume using the remote control screen on the app, music playback app, or (Volume) +/ on the supplied remote control. Play or pause content by tapping the playback operation icon on the remote control screen on the app.
Note
If pairing fails, try performing the following on the BLUETOOTH device. Accept pairing request. If the maximum number of paired devices on the BLUETOOTH device has been reached, remove any unneeded devices.
41
If the speaker system has been reset, delete the pairing information for the
speaker system from the BLUETOOTH device and perform pairing again.
Hint
If there is no BLUETOOTH device paired (when using the speaker system
immediately after purchase, etc.), the speaker system enters the pairing mode
when the input is simply changed to [Bluetooth]. Perform pairing for a second
or subsequent BLUETOOTH device.
Related Topic Setting the Wireless Function to On or Off Resetting the Speaker
System
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054655
42
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Listening to Music from the Paired BLUETOOTH Device
1 Turn on the BLUETOOTH function on the BLUETOOTH device.
2 Switch the input to [Bluetooth] on the remote control screen on the app. The
speaker system automatically reconnects to the BLUETOOTH device that was most
recently connected to the speaker system. If another BLUETOOTH device is
already connected to the speaker system, select [Connect to other devices].
Then, use the BLUETOOTH device that you want to connect to the speaker system
to select the speaker system as the device being connected to for the
BLUETOOTH function.
3 Start audio playback with the music app on the connected BLUETOOTH device.
Sound is output from the speaker system.
4 Adjust the volume. Adjust the speaker system volume from the remote control
screen on the app or music playback app. Play or pause the content by tapping
the playback operation icon on the remote control screen on the app.
To operate using the supplied remote control 1. Turn on the BLUETOOTH function
on the BLUETOOTH device. 2. Press INPUT to select the BLUETOOTH input.
The speaker system automatically reconnects to the BLUETOOTH device that was
most recently connected to the speaker system.
If you cannot connect to the BLUETOOTH device that you used in step 1, select
[Connect to other devices] on the remote control screen on the app. Then, use
the BLUETOOTH device that you used in step 1 to select the speaker system as
the device being connected to for the BLUETOOTH function.
3. Start audio playback with the music app on the connected BLUETOOTH device.
4. Adjust the volume.
Hint
If a BLUETOOTH connection is not established between the speaker system and
BLUETOOTH device, select the speaker system on the BLUETOOTH device. If sound
delay occurs, it may be improved by accessing [Settings] – [Bluetooth
Settings] – [Bluetooth Connection Quality] and set this to [Priority on Stable
Connection] on the remote control screen on the app.
To disconnect the BLUETOOTH device
Use one of the following methods to disconnect.
Turn off the BLUETOOTH function on the BLUETOOTH device. Turn off the speaker
system or BLUETOOTH device.
43
Related Topic Setting the Wireless Function to On or Off
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054654
44
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Setting the Wireless Function to On or Off
The wireless function is set to on by default.
Press INPUT (Input),
(Volume) , and (Muting) on the supplied remote control in this order to turn off the
BLUETOOTH and Wireless LAN function. [RFOFF] appears in the front panel display on the control box.
Press INPUT (Input),
(Volume) , and (Muting) on the supplied remote control in this order again to turn on
the BLUETOOTH and Wireless LAN function. [RF ON] appears in the front panel display on the control box.
Note
The following operations cannot be performed when the wireless function is set
to off: Pairing and/or connecting with a BLUETOOTH device. Using “Sony |
BRAVIA Connect.” Playing music on the network via wireless LAN.
If the wireless function is set to off, [Network/Bluetooth Standby] is
automatically set to off. (European models only)
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054652
45
Help Guide
Home Theatre System
BRAVIA Theatre Quad
About 360 Reality Audio
The speaker system is compatible with 360 Reality Audio. 360 Reality Audio is
a new music experience that uses Sony’s object-based spatial acoustic
technology to create a highly realistic sound field that makes you feel as if
you have entered the space where an artist is performing live. For details,
refer to the following URL. https://www.sony.net/360RA/
Related Topic Playing 360 Reality Audio Content from the Connected AV Device
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001273838
46
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Playing 360 Reality Audio Content from the Connected AV Device
360 Reality Audio content can be played on the speaker system by connecting an
AV device that is compatible with 360 Reality Audio to the speaker system.
1 Connect an AV device that is compatible with 360 Reality Audio to the HDMI
IN jack on the speaker system.
2 Tap the playback information/input switching area on the upper part of the
remote control screen on the app to switch the input to [HDMI].
3 Play 360 Reality Audio compatible content by operating the connected AV
device.
To operate using the supplied remote control 1. Connect an AV device that is
compatible with 360 Reality Audio to the HDMI IN jack on the speaker system.
2. Press INPUT (Input) to display [HDMI] in the front panel display on the
control box. 3. Play 360 Reality Audio compatible content by operating the
connected AV device.
Hint
For details about AV devices that are compatible with 360 Reality Audio, refer
to the following URL. https://www.sony.net/360RA/#speakers
Related Topic Connecting an AV Device
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001273837
47
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Using Spotify
Select music on the Spotify app and play it on the speaker system.
Playing music on the speaker system by using the “Spotify Connect” function
Use your phone, tablet or computer as a remote control for Spotify. Go to
spotify.com/connect to learn how.
Hint
If [Settings] – [System Settings] – [Network/Bluetooth Standby] is set to
[Off] on the remote control screen on the app, playback cannot be started
while the speaker system is in standby mode. If set to [On], the speaker
system starts up from standby mode and plays music.
Resuming music that was being played on a mobile device
1 Press INPUT (Input) to display [SPOTIFY] in the front panel display on the
control box. If you were playing music on Spotify with the speaker system, the
music that was being played on Spotify is resumed.
Note
The Spotify app may not be available in some countries/regions.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174832
48
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Using AirPlay
The speaker system is compatible with AirPlay. Music content can be selected
on an iOS device such as an iPhone, iPad, or iPod touch and stream it to the
speaker system.
1 Connect the iOS device via Wi-Fi to the same network as that of the speaker
system.
2 Play the music that you want to stream on the iOS device.
3 Display the AirPlay icon ( ) on the iOS device and tap it.
4 Select the speaker system as the speaker to stream to on the iOS device. The
music is played on the speaker system.
Hint
Music can be streamed to multiple speakers by selecting other speakers
together with the speaker system. If [Settings] – [System Settings] –
[Network/Bluetooth Standby] is set to [Off] on the remote control screen on
the app, playback cannot be started while the speaker system is in standby
mode. If set to [On], the speaker system starts up from standby mode and plays
music.
Streaming music on the speaker system by talking to Siri
If you add the speaker system to the Home app on the iOS device, you can
stream music to the speaker system by talking to Siri.
Note
Because the speaker system does not have a microphone, you cannot talk to the
speaker system to operate it. Not all Siri features are available on the
speaker system.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174833
49
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Operating the Speaker System by Interlocking with a TV (Control for HDMI
Function)
Speaker system controls such as power on/off or volume adjustment can be
interlocked with a TV’s controls by using an HDMI cable to connect the speaker
system with a TV that is compatible with the Control for HDMI function.
About the Control for HDMI function
The Control for HDMI function is a function that interlocks devices that are
connected using an HDMI (High-Definition Multimedia Interface) cable so that
these devices can be operated together. Although this function is supported by
devices that are compatible with the Control for HDMI function, it may not
work if devices other than those manufactured by Sony are connected.
Preparing to operate the speaker system by interlocking it with a TV
Enable the Control for HDMI function settings on the TV that is connected to
the speaker system using an HDMI cable. The Control for HDMI function setting
on the speaker system is enabled by default.
Note
The TV needs to be compatible with the Control for HDMI function. For details,
refer to the operating instructions of the TV. Check the speaker settings on
the TV. The speaker system power becomes synced with the speaker settings on
the TV. For details, refer to the operating instructions of the TV. Depending
on the TV, if sound was previously output from the speakers on the TV, the
speaker system may not turn on through interlocking with the TV power controls
even when the TV is turned on.
Hint
If a device such as a Blu-ray Disc player is connected to a TV using an HDMI
cable, enable the Control for HDMI function on the device. For how to enable
the Control for HDMI function on a TV or Blu-ray Disc player, refer to its
operating instructions. If the Control for HDMI (“BRAVIA Sync”) function is
enabled on a TV manufactured by Sony, the Control for HDMI function on the
speaker system is also automatically enabled. The Control for HDMI function
setting on the speaker system can be changed by accessing [Settings] – [HDMI
Settings] – [Control for HDMI] on the remote control screen on the app.
Performing power operation or volume adjustment by a TV remote control
When the TV is turned on/off or the volume is adjusted with the TV remote
control, the speaker system power operation or volume adjustment is
interlocked.
50
TV TV remote control
Power interlocking
When the TV is turned on, the speaker system turns on automatically. When the
TV is turned off, the speaker system turns off automatically.
Note
If the speaker system is turned off before the TV is turned off, the speaker
system may not turn on automatically even when the TV is turned on next. If
this occurs, perform the following operation.
Select the speaker system as the sound output device in the TV menu. If a Sony
TV is being used, turn on the speaker system while the TV is turned on.
Volume adjustment
The sound of the TV that you are watching is output from the speaker system
automatically. The speaker system volume can be adjusted with the TV remote
control.
One-touch play function
The speaker system and TV automatically turn on when content is played on a
Blu-ray Disc player connected to the speaker system or when an operation such
as the pressing of the PS button on a PlayStation®5 controller is performed.
Note
Depending on the TV, if [Settings] – [HDMI Settings] – [Standby Through] is
set to [Auto] or [On] on the remote control screen on the app and the TV sound
was last output from the speakers on the TV, the speaker system may not turn
on and sound and picture may be output on the TV only even if device content
is played.
Related Topic [HDMI Settings]
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054651
51
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Operating the Speaker System by Interlocking with a TV Compatible with the
“BRAVIA Sync” Function
“BRAVIA Sync” is an extended function that is developed by Sony based on the
Control for HDMI function. By using an HDMI cable to connect “BRAVIA
Sync”-compatible devices such as a TV or a Blu-ray Disc player, the devices
can be interlocked with each other and controlled.
To use “BRAVIA Sync”
Enable the Control for HDMI function on the Sony device to enable “BRAVIA
Sync.”
What you can do with “BRAVIA Sync”
Control for HDMI function
Power interlocking Volume adjustment One-touch play function
Related Topic Operating the Speaker System by Interlocking with a TV (Control for HDMI Function) [HDMI Settings] 5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054650
52
Help Guide
Home Theatre System
BRAVIA Theatre Quad
[Wireless Speaker Settings] These are the settings for the connection of the
supplied speakers or the optional subwoofer. The following setting items
appear by tapping [Settings] – [Wireless Speaker Settings] on the remote
control screen on the app.
Wireless speaker status check
Used to check the connection status of the speakers connected to the speaker
system on the app screen.
[Wireless Speaker Connection] Used to configure the connection settings for an
optional subwoofer. This can also be used to replace a connected subwoofer
with a new subwoofer. [Wireless Channel] Normally set to [Auto] (the best
channel for wireless communication is automatically selected). If sound
dropping occurs, this may be improved by fixing the channel. [Wireless
Playback Quality] Used to set the wireless playback quality for the 4 supplied
speakers and optional subwoofer.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054644
53
Help Guide
Home Theatre System
BRAVIA Theatre Quad
[Sound Settings] These are the settings for audio output. The following
setting items appear by tapping [Settings] – [Sound Settings] on the remote
control screen on the app.
[Sound Field Optimization] Optimizes the sound field effect. Follow the
instructions on the screen.
[Sound Field Setting] Used to select the type of surround sound effect. To
enjoy the effect of the selected sound field, turn on the sound field function
on the supplied remote control or the remote control screen on the app.
[Height of Sound Field] Adjusts the height of the entire sound field to
improve the sense of unity between picture and sound.
[Acoustic Center Sync] Outputs the center speaker portion of the speaker
system sound from the TV by connecting the speaker system and TV using the
supplied HDMI cable and the supplied TV center speaker mode cable. Set
[Control for HDMI] to [On].
[Sound output check] Used to check the sound output of the current settings
and see whether sound is being output consistently from each speaker.
[DSEE Ultimate] Plays compressed music accurately upscaled with AI technology.
[Audio DRC] Compresses the dynamic range (range between the loudest and
quietest parts) of the audio signal to make it easier to hear softer sounds.
[DTS Dialog Control] The volume of dialog is adjusted while content that is
compatible with the DTS:X dialog control function is being played.
[A/V Sync] Adjusts the delay between the picture and sound.
[Automatically adjust volume] 54
Reduces volume changes caused by the input signal. This function is effective when the volume of a TV commercial is louder than that of the TV program.
Related Topic Supplied Remote Control Remote Control Screen on the App If Your TV Has the S-CENTER SPEAKER IN Jack [HDMI Settings] 5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054648
55
Help Guide
Home Theatre System
BRAVIA Theatre Quad
[HDMI Settings] These are the settings for HDMI. The following setting items
appear by tapping [Settings] – [HDMI Settings] on the remote control screen on
the app.
[Control for HDMI] When the Control for HDMI function is enabled, devices that
are connected using an HDMI cable are operated with each other and receive ARC
audio from the TV.
[TV Power Off Link] When the TV is turned off, the speaker system is also
turned off by interlocking with the TV power. Set [Control for HDMI] to [On].
[Standby Through] Sends the HDMI signal to the TV even when the speaker system
is turned off.
[eARC] When a TV that is compatible with eARC is connected, enable this
setting to enable the eARC function. When a TV that is compatible with ARC
(but not compatible with eARC) is connected, the ARC function works regardless
of how this function is set. When eARC is enabled, check the eARC setting on
the TV. For details, refer to the operating instructions of the TV.
[HDMI Signal Format] Used to set the video format that can be received. If the
picture and sound from a device that is connected to the speaker system are
not being output correctly, change this setting.
Note
If the video format selected for this setting is not output, the video signal
specifications and settings of your TV may not match those of the speaker
system. Check the video input specifications and settings of your TV. For TV
specifications and settings, refer to the operating instructions of your TV.
If the picture and sound are not output when [Enhanced format (4K120, 8K)] is
set, set to [Enhanced format] or [Standard format]. If the picture and sound
are not output when [Enhanced format] is set, set to [Standard format]. For
details on the video formats that can be received and the type of HDMI cable
that can be used, refer to “Supported HDMI Video Formats.” The VRR/ALLM/SBTM
function is linked to this setting and enabled when [Enhanced format (4K120,
8K)] (the default setting) is set.
[Video output for PIP/PBP-displayed TV] 56
Outputs the picture from the HDMI input on the speaker system to the TV when TV input is selected on the speaker system. Turn this setting on when you want to display two windows on a TV, including the picture from the HDMI input on the speaker system.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054647
57
Help Guide
Home Theatre System
BRAVIA Theatre Quad
[Bluetooth Settings] This is the advanced setting for the BLUETOOTH function.
The following setting item appears by tapping [Settings] – [Bluetooth
Settings] on the remote control screen on the app.
[Bluetooth Connection Quality] Used to set the BLUETOOTH connection quality
when playing audio from a mobile device on the speaker system.
Related Topic Setting the Wireless Function to On or Off
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054646
58
Help Guide
Home Theatre System
BRAVIA Theatre Quad
[System Settings] These are the settings for the speaker system. The following
setting items appear by tapping [Settings] – [System Settings] on the remote
control screen on the app.
[Auto Standby] When the speaker system is not being operated and there is no
signal input for about 20 minutes, the speaker system automatically enters the
network standby mode or standby mode. [Network/Bluetooth Standby] The speaker
system can be turned on via the network or BLUETOOTH function. The speaker
system can also be turned on from the app. On: After activating the [Auto
Standby] function, the speaker system enters the network standby mode. Off:
After activating the [Auto Standby] function, the speaker system enters the
standby mode. [Auto Update] Used to set whether network updates are performed
automatically. [Dimmer] Used to adjust the brightness of the front panel
display and indicators. The brightness of the indicators for an optional
subwoofer can also be adjusted. [Unit Name] Used to change the name of the
speaker system that is displayed when a function such as the BLUETOOTH
function is being used. [System Information] Displays speaker system
information such as the software version. [Software License Information]
Displays the software license information.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054645
59
Help Guide
Home Theatre System
BRAVIA Theatre Quad
[Network Settings] These are the settings for the network. The following
setting items appear by tapping [Settings] – [Network Settings] on the remote
control screen on the app.
[Network Connect Status] Used to check the network settings on the speaker
system.
[Account Management] Used to check the list of users currently using the
speaker system or used to cancel user registration. Up to 20 user accounts can
be registered.
[External Control] Used to enable or disable the control of the speaker system
from an external control device. This setting item is for custom installers
only. Normally, disable this setting item.
[Privacy Setting] The speaker system collects information on your device
usage. Check the privacy policy that is displayed during setup, and set your
approval or disapproval for the data collection.
Hint
Once you have given your approval, you can stop the collection of information
by withdrawing your consent or resetting the speaker system to its original
settings.
Related Topic Resetting the Speaker System
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174834
60
Help Guide
Home Theatre System
BRAVIA Theatre Quad
[Easy Initial Setup] The basic settings, speaker settings, and surround sound
optimization for the speaker system can be easily performed. Tap [Settings] –
[Easy Initial Setup] on the remote control screen on the app.
TP1001054649 5-049-832-11(2) Copyright 2024 Sony Corporation
61
Help Guide
Home Theatre System
BRAVIA Theatre Quad
[Software update] Used to update the software of the control box, 4 supplied
speakers, or optional subwoofer. Tap [Settings] – [Software update] on the
remote control screen on the app.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174835
62
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Saving Power in Standby Mode
To reduce power consumption in standby mode, configure the settings as
follows.
Access [Settings] – [HDMI Settings] – [Standby Through] and set this to [Off]
on the remote control screen on the app. Access [Settings] – [System Settings]
– [Network/Bluetooth Standby] and set this to [Off] on the remote control
screen on the app.
Note
When [Network/Bluetooth Standby] is set to [Off], it may take longer for audio
to be output from the speakers.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174836
63
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Troubleshooting
If you have any problems, please follow the process below. 1. Check that the
other devices connected to the speaker system and TV are connected to the
correct jacks with the correct cables, and that they are firmly inserted all
the way to the back.
2. Check that the ventilation holes of the speaker system are not blocked.
3. Disconnect the AC adaptor(*) and AC power cords (mains leads) from the
wall outlet (mains) to turn off, and then wait several minutes before
reconnecting them.
- North American models only
4. Access the Sony support site from the menu of the “Sony | BRAVIA Connect” app to look up the cause and solution of the issue, or check the support website below. https://www.sony.net/support/HT-A9M2/
5. Reset the speaker system. All the speaker system settings are returned to their initial state.
6. If the speaker system still does not work properly, consult your nearest
Sony dealer.
Related Topic Resetting the Speaker System
5-049-832-11(2) Copyright 2024 Sony Corporation 64
TP1001054643
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Resetting the Speaker System
If the speaker system still does not operate properly with “Troubleshooting,”
reset the speaker system.
Resetting the control box
Press and hold (power) on the control box for more than 10 seconds.
Resetting the speakers
Press and hold LINK on the bottom of the speaker for more than 10 seconds. The
power indicator on the speaker flashes slowly in red and the reset starts. The
power indicator on the speaker flashes in green and amber alternately when the
reset is completed. After the reset is completed, disconnect the AC power cord
(mains lead) for the speaker from the AC outlet (mains), then reconnect the AC
power cord (mains lead) for the speaker after the power indicator on the
speaker turns off.
Note
When the speaker system is reset, delete the pairing information for the
speaker system (name of the speaker system (*), LE_name of the speaker
system) from the BLUETOOTH setting on the smartphone(), etc. connected to the
speaker system.
- Smartphones with the app installed, audio devices compatible with BLUETOOTH, etc. ** BRAVIA Theatre Quad or the device name that is set in [Unit Name].
If you reset the control box or speakers, perform the initial setup on the app.
When [External Control] is enabled, this reset operation alone will not delete some of the setting information. Perform the following
procedure before resetting.
Procedure: Press and hold down NIGHT (Night mode) on the supplied remote control for 5 seconds, then press
(Volume)
+,
(Volume) , and (Muting) in this order.
Related Topic Performing Initial Setup with the “Sony | BRAVIA Connect” App [Wireless Speaker Settings] 5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054642
65
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Specifications
Speakers (YY2080C2/YY2080C3/YY2080C4/YY2080C5)
The following descriptions are the specifications per speaker.
Front speaker section
Woofer 85 mm × 85 mm (3 3/8 in × 3 3/8 in) Cone type Midrange speaker 60 mm (2
3/8 in) Cone type Tweeter 19 mm (3/4 in) Soft dome type Speaker system 3way
speaker system bass reflex type
Top speaker section
Speaker 36 mm × 79 mm (1 7/16 in × 3 1/8 in) Cone type Speaker system Full
range speaker system acoustic suspension type
General
Power consumption On: 20 W Network standby mode (power indicator is lit in
red): 1.1 W or less Turned off (power indicator is off): 0.5 W or less*
- When you press and hold the LINK for 2 seconds or more and then release your finger, the speaker shifts to the power off mode and the power indicator is turned off. Press the LINK to use the speaker again.
When the [Auto Standby] function is enabled, if the speaker system is not being operated and there is no signal input for about 20 minutes, the speakers automatically enter the network standby mode. Disabling the [Auto Standby] function will increase the power consumption of this speaker system.
Dimensions* (approx.) (w/h/d) Speaker: 289 mm × 275 mm × 55 mm (11 1/2 in × 10 7/8 in × 2 1/4 in) Speaker with the table stand: 289 mm × 306 mm × 129 mm (11 1/2 in × 12 1/8 in × 5 1/8 in) Speaker with the wall mounting bracket: 289 mm × 279 mm × 73 mm (11 1/2 in × 11 in × 2 7/8 in) - Not including projection portion
Mass (approx.) Speaker: 2.4 kg (5 lb 5 oz) Speaker with the table stand: 2.6 kg (5 lb 12 oz) Speaker with the wall mounting bracket: 2.7 kg (5 lb 16 oz)
66
Control Box (YY2080C1)
HDMI section
Connector Type A (19pin)
LAN section
LAN(100) terminal 100BASE-TX Terminal
Wireless LAN section
Communication system IEEE 802.11 a/b/g/n/ac Frequency band 2.4 GHz, 5 GHz
BLUETOOTH section
Communication system BLUETOOTH Specification version 5.2 Output BLUETOOTH
Specification Power Class 2 Maximum communication range Line of sight approx.
30 m (98.4 ft) 1 Maximum number of devices to be registered 9 devices:
BLUETOOTH Low Energy (Connection with Sony | BRAVIA Connect) 9 devices:
BLUETOOTH Classic (A2DP) Frequency band 2.4 GHz band (2.400 0 GHz – 2.483 5
GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible
BLUETOOTH profiles2 A2DP (Advanced Audio Distribution Profile) AVRCP (Audio
Video Remote Control Profile) Supported Codecs3 SBC (Subband Codec) AAC
(Advanced Audio Coding) LDACTM4 Transmission range (A2DP) 20 Hz – 40 000 Hz
(LDAC sampling frequency 96 kHz with 990 kbps transmission) 20 Hz – 20 000 Hz
(Sampling frequency 44.1 kHz)
1 The actual range will vary depending on factors such as obstacles between
devices, magnetic fields around a microwave oven, static electricity, cordless
phone use, reception sensitivity, the operating system, software applications,
etc.
2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication
between devices. 3 Codec: Audio signal compression and conversion format 4
LDAC is an audio coding technology developed by Sony that enables the
transmission of High-Resolution (Hi-Res) Audio content, even over a
BLUETOOTH connection.
General
Input HDMI IN Outputs HDMI OUT (TV eARC/ARC) S-CENTER OUT
- HDMI IN and HDMI OUT (TV eARC/ARC) jacks support HDCP2.2 and HDCP2.3 protocols. HDCP2.2 and HDCP2.3 are newly enhanced copyright protection technology that is used to protect content such as 4K movies.
Power consumption
67
On: 13 W Network standby mode ([Network/Bluetooth Standby] is set to ON): 2.8 W or less Standby mode ([Network/Bluetooth Standby] is set to OFF): 0.5 W or less*
- When [Standby Through] is set to OFF, or [Standby Through] is set to [Auto] while the connected TV is turned off.
When the [Auto Standby] function is enabled, if the speaker system is not being operated and there is no signal input for about 20 minutes, the control box automatically enters the network standby mode or standby mode. Disabling the [Auto Standby] function will increase the power consumption of this speaker system.
Dimensions* (approx.) (w/h/d) 160 mm × 56 mm × 160 mm (6 3/8 in × 2 1/4 in × 6 3/8 in) - Not including projection portion
Mass (approx.) 770 g (1 lb 12 oz)
Wireless Transmitter/Receiver Section
Communication system Wireless Sound Specification version 4.0 Frequency band 5 GHz Modulation method OFDM
Note
Design and specifications are subject to change without notice.
Refer to the Reference Guide included with your product, which may contain specification information not listed above.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054641
68
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Supported Audio Formats
The supported audio formats differ depending on the input. ” an unsupported
audio format in the table below.
” indicates a supported audio format and “” indicates
Format
HDMI input TV input (eARC) TV input (ARC)
LPCM 2ch
LPCM 5.1ch
LPCM 7.1ch
Dolby Digital
Dolby TrueHD
Dolby Digital Plus
Dolby Atmos
Dolby Atmos – Dolby TrueHD
Dolby Atmos – Dolby Digital Plus
DTS
DTS-ES Discrete 6.1, DTS-ES Matrix 6.1
DTS 96/24
DTS-HD High Resolution Audio
DTS-HD Master Audio
DTS:X
360 Reality Audio
Note
HDMI IN does not support audio formats that contain copy protections, such as
Super Audio CD or DVD-Audio.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054639
69
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Supported HDMI Video Formats
The speaker system supports the following video formats. 8K 24/25/30/50/60 Hz
4K 24/25/30/50/60/100/120 Hz 1440p 120 Hz 1080p 24/30/50/60/100/120 Hz 1080i
50/60 Hz 720p 24/30/50/60 Hz 576p 50 Hz 480p 60 Hz
About the [HDMI Signal Format] setting
When [Settings] – [HDMI Settings] – [HDMI Signal Format] is set to [Enhanced
format (4K120, 8K)] on the remote control screen on the app, all the video
formats that are supported by the speaker system can be input. When [HDMI
Signal Format] is set to [Enhanced format], the video formats are limited to
4K 60 Hz 4:4:4, 4:2:2, etc. When [HDMI Signal Format] is set to [Standard
format], the video formats are limited to 4K 60 Hz 4:2:0, 4K 24 Hz, etc.
About the HDMI cable to use
Use an HDMI-authorized cable. Use the supplied HDMI cable to connect to a TV.
An Ultra High Speed HDMI Cable capable 48 Gbps supports all the video formats
that are supported by the speaker system. A Premium High Speed HDMI Cable with
Ethernet capable 18 Gbps supports video formats up to 4K 60 Hz 4:4:4, 4:2:2,
etc.
About the 3D signal
The following video format is compatible with a 3D signal in the Side-by-Side
(Half) format.
1080i 50/60 Hz
The following video formats are compatible with a 3D signal in the Frame
packing and Over-Under (Top-and Bottom) format.
1080p 24 Hz 720p 50/60 Hz
About HDMI connection
The speaker system supports “TRILUMINOS.” The HDMI jack on the speaker system
supports video signals up to 4K 120p/8K, HDR (High Dynamic Range)(1),
VRR(2), ALLM(3), SBTM(4), HDCP2.3(5), and a wide color gamut in compliance
with the ITU-R BT.2020 standard(6).
Hint
When the low latency mode is enabled by the ALLM function, some types of sound
processing will not be performed to reduce audio delay.
*1 HDR is a video standard that provides vivid images and is capable of representing a wider range of luminance (bright and dark). The speaker system supports HDR10, HLG (Hybrid Log-Gamma), and Dolby Vision. 70
2 VRR (Variable Refresh Rate) is a method of video transmission that can reduce video stuttering and display images smoothly by adjusting the
refresh rate on the display to match the frame rate in video games, etc. 3
ALLM (Auto Low Latency Mode) is a function that automatically switches to low
latency mode in conjunction with the output of video games, etc. 4 SBTM
(Source-Based Tone Mapping) is a function that allows an AV device to produce
and display HDR images that are optimized for the
characteristics of a TV. 5 HDCP2.3 is a copy protection technology that
protects content such as 4K and 8K video content. *6 BT.2020 is a wide color
gamut standard that is established for Super Hi-Vision TVs.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001174837
71
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Trademarks
LDAC and LDAC logo are trademarks of Sony Group Corporation or its affiliates.
The BLUETOOTH® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation and
its subsidiaries is under license.
The terms HDMITM, HDMI High-Definition Multimedia Interface, HDMI Trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Apple, AirPlay, iPad, iPhone, iPod touch and Siri are trademarks of Apple
Inc., registered in the U.S. and other countries and regions.
“BRAVIA” and “BRAVIA Sync” are a registered trademark or a trademark of Sony
Group Corporation or its affiliates.
Wi-Fi®, Wi-Fi Protected Access® and Wi-Fi Alliance® are registered trademarks
of Wi-Fi Alliance. Wi-Fi CERTIFIEDTM, WPATM, WPA2TM, and WPA3TM are trademarks
of Wi-Fi Alliance.
“PlayStation” is a registered trademark or trademark of Sony Interactive
Entertainment Inc.
“TRILUMINOS” and “TRILUMINOS” logo are a registered trademark of Sony Group
Corporation or its affiliates.
Spotify and Spotify logos are registered trademarks of Spotify AB. Spotify
service may not be available in some countries/regions. Please visit
support.spotify.com for more information.
All other trademarks and registered trademarks are trademarks or registered
trademarks of their respective holders. In this manual, TM and ® marks are not
specified.
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054638
72
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Licenses
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered
trademarks of Dolby Laboratories Licensing Corporation. Manufactured under
license from Dolby Laboratories. Confidential unpublished works. Copyright ©
2012 2021 Dolby Laboratories. All rights reserved. For DTS patents, see
http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, DTS:X,
and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the
United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED. Use
of the Works with Apple AirPlay badge means that an accessory has been
designed to work specifically with the technology identified in the badge and
has been certified by the developer to meet Apple performance standards. This
product contains software that Sony uses under a licensing agreement with the
owner of its copyright. We are obligated to announce the contents of the
agreement to customers under requirement by the owner of copyright for the
software. Please access the following URL and read the contents of the
license. https://rd1.sony.net/help/ht/sl/23c/ The software included in this
product contains copyrighted software that is licensed under the GPL/LGPL and
other licenses which may require access to source code. You may find a copy of
the relevant source code as required under the GPL/LGPL (and other licenses)
at the following URL. You may obtain the source code as required by the
GPL/LGPL on a physical medium from us for a period of three years after our
last shipment of this product by applying through the form at the following
URL. This offer is valid to anyone in receipt of this information.
https://oss.sony.net/Products/Linux/ Please note that Sony cannot answer or
respond to any inquiries regarding the content of this source code. The
Spotify Software is subject to third party licenses found here:
https://www.spotify.com/connect/third-party-licenses. Disclaimer regarding
services offered by third parties Services offered by third parties may be
changed, suspended, or terminated without prior notice. Sony does not bear any
responsibility in these sorts of situations.
TP1001054637
5-049-832-11(2) Copyright 2024 Sony Corporation
73
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Notes on Use
Precautions
Before using the speaker system, check that the operating voltage matches your
local supply voltage. The operating voltage is indicated on the nameplate
attached to the bottom of the speaker system. The supplied AC adaptor is
designed exclusively for this speaker system. It should not be used with any
other device. The supplied AC power cord (mains lead) is designed exclusively
for this speaker system. It should not be used with any other device. Unplug
the AC adaptor() and AC power cords (mains leads) from the AC outlets (mains)
when the speaker system is not being used for long periods of time. When
unplugging the AC adaptor() and AC power cords (mains leads) from the AC
outlets (mains), always unplug them by holding the plug. Never pull the cord
itself. AC adaptor(*) and AC power cord (mains lead) must only be changed at a
qualified service shop.
- North American models only
On placement
If a foreign object or water gets into the speaker system, unplug the speaker system from the AC outlet (mains), and have it checked by qualified personnel before continuing use. Do not place the speaker system near heat sources or in a location subject to direct sunlight, excessive dust, or mechanical shock. These conditions may cause malfunction. The speakers of the speaker system are not the magnetically shielded type. Do not place magnetic cards on the speaker system or near it. Do not place metal objects other than a TV around the speaker system. Wireless functions may become unstable. When the speaker system is used with a tuner, TV, or VCR, noise or distorted images may be produced. In this case, install the speaker system away from these devices. Do not place the speaker system near objects that emit a strong magnetic field, such as microwave ovens or large speakers. The temperature of the speaker system may rise during use. This is not a malfunction. If the ventilation holes on the speaker system are blocked, the temperature inside the speaker system will rise considerably. This may cause malfunction. Ensure that the ventilation holes are never blocked. Placing the speaker system on a floor that is coated with special paint, wax, grease, or solvent, etc. may result in discoloration or stains on the floor.
How to care for the speaker system
Clean the speaker system with a soft cloth lightly dampened with neutral detergent. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.
On BLUETOOTH communications
BLUETOOTH wireless technology is a short-range wireless technology that enables communication between digital devices such as smartphones and computers. The maximum communication range may vary depending on the presence of obstacles (people, metal objects, walls, etc.) or the electromagnetic environment. Microwaves that are generated by a BLUETOOTH device may affect the operation of electronic medical devices. Turn off the speaker system and other BLUETOOTH devices in the following locations, as it may cause an accident:
In hospitals, near priority seating on trains, locations where inflammable gas is present, near automatic doors, or near fire alarms.
The speaker system supports security functions that comply with the BLUETOOTH security standard during communication using BLUETOOTH wireless technology. However, depending on the configured settings and other
74
factors, this security may be insufficient. Be careful when using BLUETOOTH
communication. Sony shall assume no responsibility for any damages or loss
resulting from data leaks that may occur when using BLUETOOTH communications.
BLUETOOTH connection is not guaranteed to work with all BLUETOOTH devices.
BLUETOOTH devices being connected with the speaker system must comply with the
BLUETOOTH standard prescribed by Bluetooth SIG, Inc. and must be certified as
compliant. Even when a connected device complies with the above BLUETOOTH
standard, depending on the characteristics and specifications of the device,
it may not be able to connect, or the operation method, display, or operation
may differ.
Noise may occur or the audio may cut out depending on the BLUETOOTH device
that is connected with the speaker system, the communications environment, or
surrounding conditions. Depending on the connected device, it may take some
time for communications to start.
Other notes
When connecting the speaker system to the Internet, connect it via a router(*)
with the appropriate security settings. If there is a security issue, the
speaker system may be subject to malware (malicious software) attacks, etc.
over the internet. Your information and digital assets may be exposed to
threats such as extraction and falsification. The speaker system may also
damage other network services without your knowledge.
- A router is a device that relays between the internet and a local network line. There are the following types of routers: Wired router ADSL modem with router function Optical network unit (ONU) with router function Wi-Fi access point with router function (wireless LAN router) Wall socket (wall outlet) device with network line ()
If you are uncertain whether a wall socket (wall outlet) device with a network line has a router function, check with the manager of the housing complex or the internet provider.
LAN terminal in the wall LAN cable Router LAN cable or Wireless LAN
Note
Check that the router is turned on. Check the network connection and network settings. When a wireless LAN router is being used, the communication range may become shorter depending on the usage environment (including the wall material), radio wave reception conditions, or obstacles between the speaker system and wireless LAN router. Move the speaker system and wireless LAN router closer to each other. Devices that use a 2.4 GHz frequency band, such as microwaves, BLUETOOTH devices, or digital cordless devices, may interrupt communication. Move the speaker system away from such devices or turn them off. A wireless LAN connection may become unstable depending on the usage environment, especially while the BLUETOOTH function is being used on the speaker system. Try to improve your wireless LAN usage environment.
If you have any questions or problems concerning this speaker system, please consult your nearest Sony dealer.
TP1001054636
75
5-049-832-11(2) Copyright 2024 Sony Corporation 76
Help Guide
Home Theatre System
BRAVIA Theatre Quad
Customer Support Website
Visit the customer support website in your country or region in the following
situations. When you have a question about the speaker system. When you have
an issue with the speaker system. When you want information on compatible
items.
For customers in the USA, Canada and Latin America:
https://www.sony.com/am/support
For customers in Europe:
https://www.sony.eu/support/
For customers in Mainland China:
https://service.sony.com.cn/
For customers in Asia-Pacific, Oceania, the Middle East and Africa:
https://www.sony-asia.com/support
5-049-832-11(2) Copyright 2024 Sony Corporation
TP1001054635
77
References
- DTS
- Patents - DTS
- Page not found - Spotify
- Spotify - Connect
- Support - Spotify
- oss.sony.net/Products/Linux/
- Help Guide | Top
- 索尼官网- 索尼服务与支持网站首页_索尼售后_Sony售后首页
- Select your country or region | Sony AP
- Select your country or region | Sony USA
- Sony Support Europe
- Sony Corporation - Home
- Sony 360 Reality Audio | So Immersive. So Real.
- 360 Reality Audio | So immersive. So real. | Sony Australia
- Which Sony audio products support exclusive BRAVIA TV features? | Sony USA
- Search Results | Support | Sony USA
- Third Party Licenses | Spotify for Developers