Chaudhry KN Series Ring Eyes Light Instructions
- August 26, 2024
- Chaudhry
Table of Contents
Chaudhry KN Series Ring Eyes Light
Technical dat
| Model | KN –21C |
|---|---|
| Input power | 100V/240V50HZ/60HZ |
| Output power | 50W |
| Adjustment range | Stepless adjustment |
| Color temperature | 3000K”6000K(+200) |
| LED bulbs | 416pcs |
| Flash index | RA>90 |
| Dimension(mm) | Internal diameter 420MM, outer diameter 530MM,Thickness 35MM |
Control the rear panel operation
Front view
Back view
Remote
Operation instruction
- Please get out the light from the bag,insert the power line into the plug and connect AC.
- Turn the left knob,adjust the Power from 0% to 100%.Adjust conversely.Turn to the end counterclockwise,and turn off the light.
- Adjust the right knob,into the model of color temperature,color temperature from 3000K to 6000K.
Attention
▲ Please do not put the light at over-heat and over-moisture place.
▲ Please do not let the device be exposed to rain or moisture, to avoid
circuit problem.
Packing list
| NO | NAME | QTY |
|---|---|---|
| 1 | KN series light body | 1 |
| 2 | Adapter | 1 |
| 3 | Bag | 1 |
| 4 | Instruction | 1 |
| 5 | Mobile phone holder | 1 |
| 6 | Remote | 1 |
After-sale service
Please don’t dismantle and repair this product by yourself,otherwise,you should bear all the responsibility.Please turn off the power,and pull off the power line,please contact with the local distributor.1 year warranty.
*Upgrading the goods,the right of Įnally interpreta on belongs to our company.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.