AirDown HT-196A Electric Air Pump User Manual

User Manual

MAN 14001-2

1. DEFLATION PORT
2. DC PLUG
3. NOZZLE
4. SWITCH
5. INFLATION PORT

1. IMPORTANT

– Power supply must be automobile cigarette lighter 12 volt DC. Do not use this
– product with a power station DC -socket with less than 100W of allowable power.
– The power station may be damaged.
This pump is intended to inflate/deflate items, such as inflatable boat, air mattress, etc. It is not designed for continuous use. Extended operation over 20 minutes can overheat and damage the pump.
– Keep the air pump out of the reach of children.
– Do not obstruct the inflation/deflation port and keep them ventilated all the time.
– For fast inflation and shorten the motor’s working time, always use the suitable adapter according to the size of valve of inflatable item.

2. WARNING

– To reduce the risk, contact qualified electrician to repair or replace the damaged cord immediately.
– Carefully follow the instructions on inflatable item when inflating. Never exceed recommended pressure, otherwise, serious injury might be caused by the bursting item.
– Never leave pump unattended while the pump is in use.
– Do not keep/use the pump in wet condition.
– Never allow sands, small rocks, etc, to be sucked into inflation/deflation port when using the pump.
– Never look inside or point the inflation/deflation port towards your eyes when the pump is working.
– Never attempt to put hand or fingers into the inflation/deflation port at any time.

3. TO INFLATION ITEMS

– Connect cigarette plug to automobile cigarette lighter 12 volt DC,
– Join nozzle to inflation port through the connector.
– Then hold pump against valve of inflatable item and switch on for inflation/switch off for stop. (the symbol “-” on the switch means “ON”, “O” means “OFF”).
– The valve of inflatable item should not be obstructed, otherwise, it could overheat and damage the pump.
– Never use the deflation vent when inflating the item.
– On large items like inflatable boat, king-size air mattress, the pump should fit directly to the valve of inflatable item for fast inflation. Use the appropriate nozzle for small valve, such as single-size air mattress, etc.
– Do not run the pump continuously more than 20 minutes when using the smallest nozzle.

4. TO DEFLATION ITEMS

– Open the valve of inflatable item.
– Join nozzle to deflation port through the deflation vent, then insert it in the valve and switch on for deflation/switch off for stop. (the symbol “-” on the switch means “ON”, “O” means “OFF”). The valve of inflatable item should not be obstructed, otherwise, it could overheat and damage the pump.
– For small valve of inflatable item, it may be pinched with your fingers to open the flapper of valve and allow the air to escape.
– For quickly inflating the item with screw valve, unscrew the safe bolt, then inflate directly with the pump. When finishing, screw the safe bolt, then remove the top of the safe bolt for inflating
– the item fully; For deflation, unscrew the safe bolt to deflate directly.

Specification

Warranty

For 1 year from the date of purchase, iKamper will repair or replace (at our option) defective parts at no cost to the customer.
Our warranty does not cover all issues, such as the ones below:
– Normal wear and tear, or cosmetic blemishes occurring as a result of use.
– Damage caused by the customer (misuse, accident, abuse, storm damage, etc.)
– Aesthetic changes that do not affect the general operation.

This warranty applies only to customers who purchased directly from iKamper or an authorized dealer and does not cover second-hand purchases. While the warranty does cover products sold through authorized dealers, customers who purchased their iKamper products from a dealer must submit any After Service Requests through the dealer they purchased from.

www.ikamper.ca

References

• iKamper Canada

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>