ALMOST HEAVEN SAUNAS Barrel Sauna Rain Jacket Installation Guide
- August 22, 2024
- ALMOST HEAVEN SAUNAS
Table of Contents
ALMOST HEAVEN SAUNAS Barrel Sauna Rain Jacket
Specifications
- Material: Weather-resistant fabric
- Compatibility: Designed for use with barrel saunas
- Function: Minimizes seepage from the top half of the barrel sauna
Product Usage Instructions
Safety Precautions
Before installing the rain jacket, ensure that the barrel sauna is turned off and cool to the touch to prevent any burns or injuries.
Installation Steps
- Unfold the rain jacket and identify the top half of the barrel sauna.
- Position the rain jacket over the top half of the barrel sauna, ensuring a snug fit.
- Secure the rain jacket in place using the provided straps or fasteners.
- Adjust as necessary to ensure proper coverage and fit.
Maintenance Tips
- Regularly check the rain jacket for any signs of wear or damage.
- Clean the rain jacket as needed with a mild detergent and water to maintain its effectiveness.
Customer Support
If you encounter any issues during installation or have questions about the rain jacket, contact Almost Heaven Saunas at 888-355-3050 or email sales@almostheaven.com for assistance.
FAQ
Q: Is the rain jacket compatible with all barrel saunas?
A: The rain jacket is designed specifically for use with barrel saunas. It may not be compatible with other types of saunas.
Q: How do I know if the rain jacket is installed correctly?
A: Ensure that the rain jacket covers the top half of the barrel sauna securely and that there are no gaps or loose areas that could allow seepage.
IMPORTANT SAFETY INSTRUCTIONS
- DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
- WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
- CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
- NOTICE: Indicates information considered important, but not hazard-related.
- FOLLOW SAFETY INFORMATION IN THIS DOCUMENT TO AVOID SERIOUS INJURY OR DEATH
- REFER TO YOUR LOCAL BUILDING CODES FOR ANY SPECIFIC INSTALLATION REQUIREMENTS
- KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
- REFERENCE SAUNA MANUAL FOR FURTHER SAFETY INFORMATION
RAIN JACKET INSTALLATION
- Seepage and slight leaking in your barrel sauna are normal and harmless. However, if it is a nuisance to the sauna user the rain jacket is an effective and easy way to minimize seepage from the top half of the barrel!
- Unwrap your rain jacket. You should find the canvas with bungies pre-attached and a small baggie of eyelet screws. (image 1) Center the rain jacket over your barrel.
- The jacket should be centered around the circumference of the barrel, as well as the length of the barrel. There should be ~1” of barrel exposed on each end of the jacket. (image 2)
- Once centered, make a mark approximately 4” below the end of each bungee. Install the provided eyelet screws here.
- You may pre-drill these holes if you wish, but this is not necessary due to the soft nature of the lumber. Do this for both sides of the rain jacket. (image 3)
- Attach the bungies on one side of the rain jacket to the eyelet screws. Repeat this process for the other side. (image 4)
- Enjoy your barrel sauna rain jacket!
- If you have any questions, be sure to call Almost Heaven Saunas at888-355-3050, or email us at sales@almostheaven.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>