Paxton10 CORE Series Mini Dome Camera Owner’s Manual

Table of Contents

Specifications

Video Streams: Main – 2560 x 1440 @ 20fps, Medium – 1080p @ 20fps, Low – 720p @ 15fps, Substream – 360p @ 10fps
Max bit rate: High Resolution – 4096Kbps, Medium Resolution – 3072kbps, Low Resolution – 2048kbps
Video compression: H264
Day/Night mode: Auto
Power consumption: Not specified
Operating voltage: 12VDC or PoE (af)
Dimensions (W x H x D): Not specified
Weight: Not specified
SD Card: 64GB included, Class 10, U1, 95MB/s Read speed, 24 MB/s Write speed, 1-year warranty
Operating temperature: Not specified
IP Rating: IP67
IK Rating: IK10

Installation
To install the Paxton10 Mini-Dome Camera from the CORE series, follow these steps:

Choose a suitable location for mounting on either a wall or ceiling.
Ensure the mounting surface can support the weight and is secure.
Connect the camera to a power source using either the 12VDC or PoE (af) option.
Adjust the camera angle using the 3-axis manual adjustment feature for optimal viewing.

Storage Setup
The camera comes with a pre-installed 64GB SD card for storing video footage. To access the stored footage:

If using the SD card, remove it from the camera and insert it into a compatible device to view or transfer recordings.
If storing footage on a network location, configure the camera settings to send video data to the desired network location.

Motion Detection
The camera features intelligent motion detection. To set up motion detection:

Access the camera settings through the Paxton10 system interface or web portal.
Select the motion detection option and adjust the sensitivity levels as needed.
Define specific areas within the camera’s view for motion detection if required.

Q: Can I use a different SD card with the camera?

A: Yes, you can use an SD card with specifications that match or exceed the recommended Class and capacity. Ensure compatibility before use.

Q: What is the warranty period for the Paxton10 Mini-Dome Camera?

A: The camera comes with Paxton's 5-year no-quibble warranty for added peace of mind.

Q: Is it possible to mount the camera outdoors?

A: Yes, the camera has an IP67 rating, making it suitable for outdoor use. Ensure proper installation for long-lasting performance.

The Paxton10 camera range is designed specifically to work with the Paxton10 system. As such they offer the most simple, secure, and flexible installation possible. No NVR or other hardware is required as video is processed on the camera and can be stored either on the pre-installed 64GB SD card or sent directly to any network location.
The Paxton10 core camera range features stunning low-light performance, inbuilt IR, QHD resolution, and intelligent motion. All cameras come with Paxton’s 5-year no-quibble warranty.

System

Video Streams – Main – Defaults

High
- Resolution 2560 x 1440
- Frames per second 20fps
- Max bit rate 4096Kbps
Medium
- Resolution 1080p
- Frames per second 20fps
- Max bit rate 3072kbps
Low
- Resolution 720p
- Frames per second 15fps
- Max bit rate 2048kbps
Substream
- Resolution 360p
- Frames per second 10fps
- Max bit rate 512kbps
- Video compression H264
- Day/Night mode Auto

Electrical

Communication

Hardware

Dimensions (W x H x D) Ø 121.4mm × 92.2mm
Weight 580g
SD Card 256GB Max (64GB included)
Video format PAL/NTSC
Image Sensor 1/3″ Progressive Scan CMOS
Focal Length 2.8mm
Aperture F1.4
FOV
- Horizontal field of view: 103°
- Vertical field of view: 55°
3-Axis Adjustment (manual)
- Diagonal field of view: 123°
- Pan: 0 to 355°, tilt: 0 to 75°,
- rotation: 0 to 355°
Material
- Body: Metal
- Dome: Plastic
Warranty Paxton 5 year