BRIGHT PACKAGING A03 Pneumatic Multi Product Liquid Filling Machine User Guide
- August 18, 2024
- BRIGHT PACKAGING
Table of Contents
BRIGHT PACKAGING A03 Pneumatic Multi Product Liquid Filling Machine
Brief Introduction
The A03 manual filling machine is specially designed for filling liquid and
cream from 10ml-100ml. The shell of the machine is durable powder-coated and
all the parts inside are made from 304# stainless steeland TEFLON, it is
beneficial for individual factories and those factories of small scale.
laboratory, hospital, or beauty parlor in daily use chemical section.
Technical Parameters
- Filling Range: 10ml – 100ml.
- Capacityofthe Hopper: 10L
- Gross Weight: 13kg
- Overall Dimension: 33x33x78cm
Operational Approach for Model A03 Manual Filler
To setting up the filling volume: pull the handle (Fig 1.23) up at first,
then loosen the locking nut(Fig1.25), circumgyrate the measure nut(Fig1.26)CCW
to increase the filling volume or CW to reduce. Tighten up the locking nut
while you get a right volume. Choose a right nozzle for your bottles, try to
use a thick and short nozzle if possible.
Operational Approach for model A02 pneumatic filler
Connect the machine to an air pump by using a ф8mm pipe, depresses the pedal
switch to work in jog mode, and step on the pedal switch to work
automatically. Use speed controller for inlet and outlet(fig2.2.2.6) to adjust
the filling speed. Then adjust the filling volume as same as model A03 manual
filler.
Attention : This machine is not fit for filling the materials concretionray (such as face cream or beef fat etc.) or any materials with grain.
MAINTENANCE
- Keep the machine body clean in case of erosion to extended service life.
- Please lubricate the abscissa axis (fig1.14) , segment gear (fig1.13) and the rack (fig 1. 11) termly.
- Please unpick and clean the machine before leave it unused for a long time
- hopper
- screwcap
- cone screwcap
- piston ring
- piston rod
- measure cylinder
- fastener
- cylinder base
- sealing ring
- seal receptacle
- gear rack
- cover plate
- sector gear
- crossshaft
- machine base
- sealing ring
- sealing ring
- sealing ring
- valve plug
- spring
- outlet screw cap
- 0-ring
- handel
- nozzle
- upper locking nut
- upper measure nut
- down measure nut
- down locking nut
Warranty Description
- From the date of sale of the company’s products, according to national regulations, three guarantees are implemented, and the contents are as follows:
- After purchasing the machine, the user must read the instruction manual carefully and operate it.
- During the three-guarantee period, the user does not follow the instruction manual for correct operation, use, maintenance, maintenance or unauthorized dismantling
- Damage caused by replacement parts is not covered by the warranty. However, the company still maintains it, and the cost is borne by the user.
- Warranty period The mechanical parts are guaranteed for one year. Electrical components are guaranteed for six months.
- After purchasing the machine, please carefully check the model of the product according to the invoice and warranty card, and whether the machine number is unified. If it is not unified, please contact our company in time to correct it.
- Please keep the purchase invoice and warranty card properly. If you lose it, you will not be able to make up for it. It will be invalid if you alter it without permission. Show a valid warranty card and purchase invoice.
Certificate
Product Name:
Product number:
Inspector:
Production Date:
The product is qualified and allowed to leave the factory
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>