AURIOL 4-LD6584-1 Wall Clock With Temperature and Humidity Instruction Manual
- August 19, 2024
- AURIOL
Table of Contents
- AURIOL 4-LD6584-1 Wall Clock With Temperature and Humidity
- Product Specifications
- Product Usage Instructions
- FAQ
- Introduction
- Intended use
- Package contents
- Technical specifications
- Explanation of signal words
- Explanation of sign
- Important safety instructions
- Service
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AURIOL 4-LD6584-1 Wall Clock With Temperature and Humidity
Product Specifications
- Product Name: Wall Clock with Temperature & Humidity
- Model Number: IAN 459952_2310
- Manufacturer: Inter-Quartz GmbH
- Power Source: Alkaline Battery (included)
- Indoor Use Only
Product Usage Instructions
Introduction:
The wall clock with temperature and humidity features is designed to
display the time along with additional functions such as temperature and
humidity readings. It is intended for indoor use only.
Unpacking and Setup:
Upon unpacking the product, ensure the alkaline battery is included.
Install the battery correctly and handle with care to prevent breakage.
Setting Up:
- Time Setting: Adjust the clock hands to set the correct time.
- Thermometer: Allow some time for the sensor to adjust to its new environment after unpacking.
- Hygrometer: Similar to the thermometer, give time for the sensor to adapt to the surroundings.
Cleaning and Maintenance:
Regularly clean the clock using a soft, dry cloth. Avoid using harsh
chemicals that may damage the surface. Store the clock in a dry place away
from direct sunlight and extreme temperatures.
Disposal:
Follow local regulations for proper disposal of the product at the end of
its life cycle.
FAQ
-
Can the clock be used outdoors?
No, the product is intended for indoor use only. -
How often should I replace the battery?
The alkaline battery included should last a considerable amount of time, but it is advisable to replace it when the clock shows signs of low power. -
What should I do if the temperature or humidity readings seem inaccurate?
Allow some time for the sensors to adjust to the new environment. If issues persist, contact customer support for further assistance.
Introduction
- Congratulations on purchasing your wall clock with thermometer and hygrometer (hereinafter referred to as „device“). In choosing this item, you have opted for a high-quality product. These operating instructions form an integral part of this product. It contains important instructions pertaining to its safety, use and disposal. Please familiarise your-self with all the operating and safety instructions before using this product. Only use this product as described and for the purposes stated.
- If you give this product to anyone else, please be sure to pass on these documents. Please keep the packaging and operating instructions for future reference.
Intended use
- The product is suitable for displaying the time and for using the additional functions described. Any other use or modification of the product is considered improper use.
- The product is only suitable for indoor use.
- The manufacturer is not liable for damage caused by improper use or incorrect operation. The product is not intended for commercial use.
Package contents
Note: Please check the delivery contents after purchase. Check that all parts are present and not defective. If the delivery is incomplete and/or parts are damaged, do not use the product. Contact the service department (see „Processing in the event of a warranty claim“).
- 1 x wall clock
- 1 x battery 1.5 V AA LR6
- 1 x Quick start guide
Technical specifications
- Quartz movement ES368
- Measuring range/temperature : -20 – 50 °C
- Temperature display/tolerance: +/-3 °C
- Measuring range/humidity: 10 % – 100 %
- Humidity display/tolerance: +/-8 %
- Dimensions: approx. Ø 25.4 x 4.0 cm
- Weight: approx.378 g (excl. batteries)
- Battery: 1 x 1.5 V AA R6/LR6
Explanation of signal words
Explanation of sign
Important safety instructions
Safety instructions for the user
WARNING! Danger of death and accidents for toddlers and children!
Children frequently underestimate the risks. Always keep children away from
the product.
- This product may be used by children aged 8 years and older and by persons with reduced physical, sensory or mental capabilities or a lack of experience and knowledge if they are supervised or have been instructed in the safe use of the product and understand the hazards involved. Children are not allowed to play with the product. Cleaning and user maintenance is not to be carried out by children without supervision.
- The packaging material is not a toy. Children can get caught in it and suffocate while playing.
- Do not operate the product if it is damaged.
- Do not expose the product to moisture.
- Only use the product indoors.
- This product does not contain any parts that can be serviced by the consumer.
Battery safety information
WARNING! Danger of death!
- Keep batteries/rechargeable batteries away from children. If swallowed, immediately seek medical attention.
- Ingestion can result in burns, perforation of soft tissue and death. Severe burns can occur within 2 hours after swallowing.
- Do not use rechargeable batteries.
- Never recharge non-rechargeable batteries.
- Do not short-circuit batteries/rechargeable batteries and do not open them. This can result in overheating, fire hazards or explosions.
- Never throw batteries/rechargeable batteries into fire or water.
- Do not subject batteries/rechargeable batteries to mechanical stress.
Risk of battery/rechargeable battery leakage
-
CAUTION! Risk of injury!
Leaking or damaged batteries/rechargeable batteries can cause burns if they come into contact with skin.
Therefore, wear suitable protective gloves in such cases.- Avoid extreme conditions and temperatures that may affect batteries/rechargeable batteries, e.g. radiators/direct sunlight.
- If batteries/rechargeable batteries leak, prevent chemicals from coming into contact with skin, eyes and mucous membranes. Rinse any affected areas immediately with clear water and seek medical attention.
- In case of leakage from the batteries/rechargeable batteries, remove them from the product immediately to avoid damage.
- Remove the batteries/rechargeable batteries if the product will not be used for a prolonged period.
-
ATTENTION: Damage to the product
- Only use the specified type of battery/rechargeable battery.
- Insert batteries according to the polarity markings (+) and (-) into the battery/rechargeable battery and the product.
- Clean the contacts on the battery/rechargeable battery and in the battery compartment with a dry, lint-free cloth or cotton swab before inserting them.
- Remove discharged batteries/rechargeable batteries from the product immediately.
Hanging the product safely on the wall
The product is not designed for use in rooms with high humidity (e.g.,
bathrooms). Before mounting to the wall, make sure that there are no gas,
water or electricity lines at the drilling location. Use suitable screws and
dowels (not included in the package contents). Be mindful of the wall‘s
condition. The manufacturer assumes no liability for damage caused by improper
fastening. Make sure that:
- no direct heat sources (e.g., heaters) affect the product;
- it is not placed in the path of direct sunlight;
- contact with spraying or dripping water is avoided;
- the product is not mounted in the immediate vicinity of magnetic fields (e.g., loudspeakers);
- no foreign bodies can enter the product;
- candles and other open flames must be kept away from this product at all times to prevent the spread of fire.
Setting up the product
Using the correct polarity, insert a 1.5 V AA R6/LR6 battery into the battery compartment on the back of the product.
Setting the time
Use the dial on the back of the product to set the time.
Thermometer
- Your product has an analogue temperature display (TEMPERATURE).
- The measuring range of the temperature is between -20 – 50 °C.
Note: After unpacking your device, it may take some time for the sensor to adapt to the new environment.
Hygrometer
- Your product has an analogue humidity display (HUMIDITY).
- The humidity measuring range is between 10 – 100 %
Note: After unpacking your device, it may take some time for the sensor to adapt to the new environment.
Cleaning instructions
- Improper cleaning can damage the product. Do not immerse the product in water or other liquids. Avoid any aggressive cleaning agents, brushes with metal or nylon bristles, or any sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can damage the surface.
- Clean the product with a soft, dry, lint-free cloth, such as that used for cleaning glasses lenses.
Storage
If the product is not used for a long time, remove the battery, clean and
store the product away from sunlight in a dry, cool place, preferably in the
original packaging.
Disposal
- The product and packaging material are recyclable. Please dispose of them separately for better waste management. To learn options for disposal of the used product, please contact your municipal or city administration.
- Check the labelling on the packaging material when separating waste – they are marked with abbreviations (a) and numbers (b) with the following meaning:
- 1-7: Plastics
- 20–22: paper and cardboard
- 80-98: Composites.
Disposal of the electrical device
The symbol with the crossed-out dustbin means that electrical and electronic
equipment must not be disposed of together with household waste. Consumers are
legally obliged to dispose of electrical and electronic equipment at the end
of their life separately from unsorted municipal waste. This is to ensure
environmentally friendly and resource saving recycling. Batteries and
rechargeable batteries that are not an integral part of the electrical or
electronic device and can be removed without being destroyed, must be
separated from the device before handing it in at a collection point for
designated disposal. The same applies to lightbulbs that can be removed from
the device without being destroying. Owners of electrical and electronic
equipment who are private individuals can hand them in at the collection
points operated by the public waste disposal agencies or at the collection
points set up by manufacturers or distributors. Returning used devices is free
of charge. This free take-back obligation applies both to purchases in shops
and to home deliveries. The place of performance of the obligation to take
back is the same as the place of performance of the delivery. Transport costs
may not be charged for returned equipment. In general, distributors have the
obligation to ensure the free return of used devices by providing suitable
return facilities within a reasonable distance. Consumers have the option to
return an old device free of charge to a distributor who is obliged to take it
back if they purchase an equivalent new device with essentially the same
function. This option is also available for deliveries to a private household.
In the case of distance selling retailers, the option of free collection when
purchasing a new device is limited to heat exchangers, display screen devices,
and large devices that have at least one outer edge with a length of more than
50 cm. The distributor must ask the consumer at the time of concluding the
sales contract about any corresponding intention to return the product. Beyond
this, consumers can hand in up to three old devices of one type free of charge
at a distributor‘s collection point without this being linked to the purchase
of a new device. However, the edge lengths of the respective devices must not
exceed 25 cm. Remove the battery without destroying it before disposal and
dispose of it separately (see Disposal of batteries).
Disposal of batteries
- The accompanying symbol indicates that batteries must not be disposed of with normal household waste. Defective or used batteries must be recycled in accordance with Directive 2006/66/
EU and its amendments. Consumers are legally obliged to hand in all batteries, regardless of whether they contain harmful substances, such as:
Cd = cadmium, Hg = mercury, Pb = lead, Li = lithium or not, to a collection point in their municipality/district or a retail outlet to ensure environmentally friendly disposal and to recover valuable raw materials, such as cobalt, nickel or copper. The return of batteries is free of charge.
WARNING! Environmental damage due to incorrect disposal of batteries!
Some of the possible contents, such as mercury, cadmium and lead, are
poisonous and, if not disposed of properly, endanger the environment. Heavy
metals, for example, can have harmful effects on the health of humans,
animals and plants and accumulate in the environment and in the food chain,
and then enter the body indirectly via food.
WARNING! Risk of explosion!
With used batteries containing lithium (Li = lithium), there is a high risk of
fire. Therefore, special attention must be paid to the proper disposal of used
and rechargeable batteries containing lithium. Incorrect disposal can also
lead to internal and external short circuits due to thermal effects (heat) or
mechanical damage. A short circuit can lead to a fire or an explosion and have
serious consequences for humans and the environment. For this reason, tape off
the poles of lithium-based batteries prior to disposal in order to avoid an
external short circuit. Batteries that are not permanently installed in the
device must be removed and disposed of separately before disposing of the
device. Please return batteries only when fully discharged! Use rechargeable
batteries instead of disposable batteries whenever possible.
Simplified EU declaration of conformity
- Digitech gmbh hereby declares that the wall clock with thermometer and hygrometer 4-LD6584-1, 4-LD6584-2 complies with the RoHS directives 2011/65/EU and 2014/30/EU.
- You can download your operating instructions and declaration of conformity here: www.digi-tech-gmbh.com/downloads
- Then click on the magnifying glass and enter the item number 459952_2310.
The digi-tech gmbh warranty
This device has a 3-year warranty valid from the date of purchase. In the event of defects in this device, you have legal rights against the seller of the device. These statutory rights are not limited by our warranty set out below.
Warranty terms
The warranty period begins on the date of purchase. Please keep the receipt.
This document is required as proof of purchase. If a material or manufacturing
defect occurs within three years of the date of purchase of this device, the
device will be repaired or replaced – at our discretion – by us free of
charge. This warranty requires that the defective device and the purchase
receipt are presented within the three-year period with a briefly written
statement stating the nature of the defect and when it occurred. If the defect
is covered by our warranty, you will receive the repaired or a new device
back. No new warranty period begins with the repair or replacement of the
device.
Warranty period and statutory claims for defects
Statutory warranty rights do not extend the warranty period. This also applies
to replaced and repaired parts. Any damage or defects already present at the
time of purchase must be reported immediately after unpacking. After the
warranty has expired, any repairs are subject to a charge.
Scope of Warranty
The device was carefully manufactured according to strict quality guidelines
and carefully checked before delivery. The warranty applies to material or
manufacturing defects. This warranty does not cover parts of the product that
are subject to normal wear and tear and can therefore be regarded as wear
parts or for damage to fragile parts, e.g. switches, batteries or parts made
of glass. This warranty is void if the unit has been damaged or improperly
used or maintained. For proper use of the device, all instructions given in
the manual must be strictly observed. Uses and actions that are advised
against or warned against in the operating instructions must be avoided at all
costs. The device is designed exclusively for private and not for commercial
use. The warranty expires in the event of abusive or improper handling, the
use of force or repairs that were not carried out by our authorised service
branch.
Processing in the event of a warranty claim
To ensure that your request is processed quickly, please follow the
instructions below:
- For all inquiries, please have the receipt and item number (459952_2310) ready as proof of purchase.
- Please refer to the type plate, engraving, title page of your manual (bottom left) or to the sticker on the back or underside for the item number.
- If functional errors or other defects occur, first contact the following service department by phone or email.
You can download these instructions and many other manuals, product videos and software at www.lidl-service.com.
This QR code will take you directly to the Lidl service page (www.lidl- service.com), where you will be able to access your operating instructions by entering the item number (459952_2310).
Service
Inter-Quartz GmbH, Valterweg 27A, 65817 Eppstein, GERMANY Email: support @inter-quartz.de, Telephone: +49 (0)6198 571825
- 00800 5515 6616
- 8009 4403
- 800 62851
Supplier
Please note that the following address is not a service address. Contact
the Service Office named above first. digi-tech gmbh, Valterweg 27A, 65817
Eppstein, GERMANY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>