IKEA DRAGSMARK Clip on Handle Instruction Manual
- August 17, 2024
- Ikea
Table of Contents
IKEA DRAGSMARK Clip on Handle
IKEA
Design and Quality IKEA of Sweden
Assembly Instructions
If you have any questions, please contact IKEA customer service.
Important Information
Do not remove the protective film from the surface.
Step 1
- Attach the component to the edge of the surface as shown in the diagram. Ensure the component is aligned correctly and securely fastened.
Important Information
Do not slide the component up or down. Instead, rotate it into place as
shown in the diagram.
Once the component is in place, ensure it is securely fastened by pressing it
firmly.
© Inter IKEA Systems B.V. 2023
AA-2404108-3
2023-10-26
Specifications
| Component | Description |
|---|---|
| Component 1 | Main attachment piece |
| Component 2 | Protective film |
FAQ
-
Q: What should I do if the component does not fit?
A: Ensure that the component is aligned correctly and try rotating it into place as shown in the diagram. -
Q: Can I remove the protective film?
A: No, do not remove the protective film from the surface. -
Q: Who should I contact if I have questions?
A: Please contact IKEA customer service for any questions or concerns.
DRAGSMARK
Design and Quality IKEA of Sweden
Safety
Assembly Instructions
2023-10- 26
© Inter IKEA Systems B.V. 2023 AA-2404108-3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>