MAIXINDA PWC8 15W Wireless Charging Gravity Mount User Manual

MAIXINDA PWC8 15W Wireless Charging Gravity Mount User Manual

Introduction

Thank you for purchasing the 15W Wireless Charging Gravity Mount.

Features

• Compatible with Qi enabled smartphones
• High efficiency 15W charging power
• Telescopic arm extends up to 5″
• Phone snaps into place when it’s placed on the base of mount
• Smart LED Power Indicator turns blue when charging, red when ready to use

Package Contents

1(One) 15W Wireless Charging Gravity Mount

1(One) USB-Ato USB-C Power Cable 3.28ft (100cm)

1(One) User Manual

Specifications

• Input: USB-C 5V/3A 9V/2A
• Output Power: 5W/7.5W/10W/15W (5V1A9V1.12A9V1.66A)
• Wireless Transmission Distance: 0.31inches
• Product Size: 7.5 X 3.75ln. X 4.25In (19Cm. X 9.50m. X 10.70m)
• Charging Cable: 3.28ft (100cm)
• Material: ABS

Getting to Know your Product

Installation Method

• Attach the suction cup to a clean and smooth surface on your car dashboard or windshield.
• Loosen the knob near the extendable arm to extend up to 5″. Adjust the position and angle of the charger mount according to your preference.
• Place your phone in the gravity mount to secure it in place for wireless charging. The arms will automatically close due to gravity.

Operation

Connect the wireless charger to a 5V/3A or 9V/3A adapter using the provided USB-C fast charging cable.
Place your Qi-certified mobile phone within the wireless charging area of the mount to initiate charging.

Note: Requires power via included cable and a USB-C car charger (not Included). For maximum 10W charging, an 18W QC 3.0 or PD USB car charger is required (not included). Please check your respective device’s specification for maximum charging speed capability.

Tips

• Do not place metal debris or magnetic cards on the charging board, as it may cause overheating. Slight heating during charging is normal.
• Keep the charger away from fire sources or corrosive environments. -Avoid obstructing the wireless charging area with metal objects or thick phone cases.
• Do not attempt to disassemble or modify the charger mount
• Keep the charger mount away from water and moisture to prevent damage.
• Use caution when driving and avoid adjusting the charger mount while the vehicle is in motion.

Safety and Care Instructions:

Read all the instructions before using the product and them store them for future reference. Failure to follow these safety instructions, could lead to fire, electrical shock, personal injury, property damage, or damage to the product This product contains a non-replaceable rechargeable lithium-ion battery. When discarding, follow your local/state guidelines.

• Do not expose to rain, moisture, or other liquid. Do use near water such as swimming pools, bathtubs, or sinks. If it becomes wet, immediately unplug the product from a power source.
• Do not handle the unit USB cord or wall charger with wet hands.
• Do not charge, or use, the product if it has been submerged in water, of if water has got inside the product.
• Do not expose to heat sources, the sun, or leave in a hat vehicle
• Do not dispose of in a fire.
• Do not expose the product to extremely high or low temperatures.
• Use this product in a location with a temperature of 32°F-95°F. Prolonged exposure to extreme heat or cold reduces battery longevity. Exposure to fire or temperatures above 170F could cause serious damage and explosion. • Do not dissemble, there are no serviceable parts inside. Do not drop
• Do not use if damaged or modified or if you see any buying, swelling, leakage or other abnormality.
• Never insert objects other than the specified cables into the product.
• Damaged or modified batteries may ohibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not modify or try to use for a non-intended purpose.
• Do not use the power bank more than its output rating. Overload outputs above rating may result in a risk of fire or injury.
• Do not place anywhere where the product would become crushed or punctured.
• Place the charger on a flat sturdy surface during charging Charge in a well-ventilated area and make sure it is not covered with any material. Power banks generate heat when charging, and the power bank may temporarily stop charging if it gets too hot.
• Charge using the correct wall charger, and make sure that the charger is Inserted all the way into the electrical outlet
• Disconnect the charger once the product is fully charged.
• This product is not a toy. Keep out of reach of children or those that require supervision
• Do not use abrasive cleaning solvents to clean the unit.

Note: Lithium-ion batteries will self-discharge over time. To ensure battery life. do not store the product in an uncharged state for a length of time. If left in a discharged state for too long a lithium-ion battery will no longer have the ability to be recharged.

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Distributed By: Jem Accessories, Inc. 32 Brunswick Ave., Edison, N.J. 08817 MADE IN VIETNAM

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>