Outsunny 845-171 Garden Shed House Hut Gardening Tool Storage Installation Guide

Outsunny 845-171 Garden Shed House Hut Gardening Tool Storage

Product Specifications

• Model Number: IN230900105V01_GL
• Part Number: IN230900105V01_GL_845-171
• Tools Recommended: 30

ASSEMBLY PREPARATION

Please check local building codes regarding footings, location, and other requirements before beginning construction. Study and understand this owner’s manual of important information and helpful tips for easier and more enjoyable assembly.

Assembly instructions:
Reviewing all instructions and the appropriate information before you begin, make sure to follow the step sequence carefully for successful results.

Flooring base:

• The site must be prepared so that the base of the shed is level all around and checking with a spirit level is required.
• The base can be constructed with treated timber or concrete, to stop the moisture from getting into the shed, The shed is not designed to be built onto the lawn directly. Also, the ground will get muddy during rainy days.
• If a concrete pad is made, it is important that this slopes toward the edges to prevent water ingress. Time must be allowed for any concrete or cement to dry before building the shed on top.
• Bases can also be constructed from bricks, blocks, or mounted on a concrete pad.
• The bricks or blocks should be cemented onto firm and level concrete footings and the greenhouse frame drilled and screwed to the base.

Parts and Parts List

• Before you start. separate and identify all the parts and hardware to be sure that you east the necessary Paris for your building refer to die Parts List Before
• Do not attempt to assemble the building if parts are missing because any building left partially assembled may be seriously damaged by light winds.

Safety must be put in the No. 1 position:

1. Select a dry and calm day for your assembly. Team works ( Two or more people ) are required during the assembly;
2. Wearing safety gloves, eye protection, and long sleeves during the assembly to prevent injury; Pay attention to the sharp edge of some parts;
3. Children and pets are not allowed to enter the construction site;
4. Never concentrate your total weight on the roof of the building. When using a step ladder make sure that it is safe;

Care & Maintenance

1. Keep the shed clean with a soft cloth, use water if necessary;
2. Keep the door tracks clear of dirt and other stuff that prevents them from sliding easily.
3. Clean the snow with the necessary tools to make sure it is safe to enter; Heavy snow may cause collapse, so lease ensure it is safety before entering.
4. The shed is not made for living but for storing stuff.

NOTICE: If there is slight bending on the corners

1. Pls wear gloves and stretch the corners slightly until they are flat
2. Then the sheets will be normal and there is no affection to the assembling

INSTALLATION INSTRUCTION

Tips: Alian the gasket with the hole. and then use the electric drill to drill the S2 into the hole.

MORE INFORMATION

• US: If you have any questions, please contact our customer care center, Our contact details are below:
• 8 001-877-644-9366
• A customerservice@aosom.com
• Imported by Aosom LLC
• 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
• MADE IN CHINA

Frequently Asked Questions

• Q: How many tools are recommended for this product?
  • A: 30 tools are recommended for assembly.
• Q: What is the model number of the product?
  • A: The model number of the product is IN230900105V01_GL.
• Q: How should I proceed if I encounter difficulties during assembly?
  • A: If you face any challenges during assembly, refer to the provided steps and ensure each component is correctly aligned and connected. You can also contact customer support for assistance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>