NICRON C3 Two Palm Sized Flashlights User Manual
- August 18, 2024
- NICRON
Table of Contents
NICRON C3 Two Palm Sized Flashlights
Specifications:
- Battery Type: 14500 Li-ion Battery
- Charging Type: Type-C
- Brightness Levels: High (1000LM), Med (250LM), Low (10LM)
- Run Time: High (1 hour), Med (3.3 hours), Low (40 hours)
- Beam Distance: 100m
- Intensity: 3000cd
- Drop Resistance: 1.0m
- Water Resistance: IP68
Product Usage Instructions
Device Overview:
The device has red light when charging which turns green when fully
charged. It is compatible with a 14500 Li-ion Battery and features Type-C
Charging. Make sure to remove the insulating sheet before use.
Product Features & Parameter Description:
The product offers different brightness levels and run times based on the
type of battery used. The FL1 STANDARD provides detailed specifications for
each mode.
Operating Instructions:
Refer to the operating map to understand the Regular Mode with AA Battery
and Blink Mode. Make sure to follow the specified run times and brightness
levels for each mode.
Caution:
Pay attention to the safety instructions provided in the manual. In case of
any issues, contact the customer line immediately.
Warranty Conditions:
Read the warranty conditions carefully to understand the coverage and terms
provided with the product.
FAQ:
-
Q: How do I know when the battery is fully charged?
A: The red light indicates charging, and it will turn green when the battery is fully charged. -
Q: What is the water resistance rating of the product?
A: The product has an IP68 water resistance rating, making it resistant to rain and water submersion. -
Q: What is the recommended beam distance for optimal performance?
A: The recommended beam distance for this product is 100 meters for maximum intensity.
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Device Overview
Note: Please remove the insulating sheet.
| High | Med | Low | Beam Distance | Intensity | Drop Resistant | Water Resistant |
|---|---|---|---|---|---|---|
| Brightness: 1000LM | Brightness: 250LM | Brightness: 10LM | 100m | 3000cd | 1.0m |
IP68
Run Time: 1 hour| Run Time: 3.3 hour| Run Time: 40 hour
Operating Map
Regular Mode
- Power Off → Press → Low 10LM → Press → Med 250LM → Press → High 1000 LM → Press (circle) → Low 10LM
- Power Off → Press → Low 10LM → Press → Med 250LM → Press → High 1000 LM → Press → Power Off
AA Battery
-
Power Off → Press → Low 5LM → Press → Med 40LM → Press → High 200 LM
→ Press (circle) → Low 5LM -
Power Off → Press → Low 5LM → Press → Med 40LM → Press → High 200 LM
→ Press → Power Off
Blink Mode
- Any Mode → Triples click in 1 second → Strobe → Press → SOS → Press → Power Off
Product Features & Parameter Description
- Function settings as below:
| FL1 STANDARD | HIGH | MED | LOW | Strobe | SOS |
|---|
14500 Li-ion Battery
Brightness (LM)| 1000| 250| 10| 1000| 1000
Run time (hrs)| 1| 3.3| 40| N/A| N/A
Beam distance| 100 meters
Max intensity| 3000 cd
1*AA Battery
Brightness (LM)| 200| 40| 5| 200| 200
---|---|---|---|---|---
Run time (hrs)| 8| 13.5| 125| N/A| N/A
Beam distance| 50 meters
Max intensity| 650 cd
Drop testing| 1 meter
Water resistance| IP68, raining resistant
Note: Above data tested based on ANSI FL2009 standard with the 14500 Li- ion battery & AA battery at normal temperature in the lab; results may vary depending on different environments.
- Bulb: High power LED
- Dual-Fuel: Using 1pc safety 14500 Li-ion or 1pc AA battery, rechargeable battery with protection system
- Voltage range: 1.0~4.2V
- Standard USB charger: DC 5V 1A
- Material: Aluminium Alloy
- Weight: 35g (excluding battery)
- Size: Length 96mm × Dia 19mm
- Normal usage temperature: -20°C ~ 50°C
- Storage temperature range: -20°C ~ 50°C
Operating Instructions
To switch on/off:
- Press the switch to turn on or off the flashlight.
Regular function:
- 14500 Li-ion battery: low-med-high (3 modes cycle)
- AA battery: low-med-high (3 modes cycle)
Hidden function:
- Triple click within 1.5 seconds to activate Hidden strobe – SOS.
Charging:
- When charging, first take out the battery, connect the USB charger, and insert the Type-C cable into the USB port of the battery. The red indicator light is on when charging, and the green indicator light is on when the battery is fully charged.
Caution
- Do not look directly at the flashlight. Light of high brightness could cause damage to your eyes.
- This product can be used with a 14500 Li-ion battery and AA battery.
- Do not throw the battery into fire or water. Please insert the battery in the correct polarity when charging.
- We recommend charging at least every three months to extend battery life.
- Keep batteries away from children. If swallowed by mistake, please seek medical attention immediately.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other
relevant provisions of EU directives.
WEEE
This product must not be disposed of as normal household waste in accordance
with the EU Directive on Waste Electrical and Electronic Equipment (WEEE –
2012/19 / EU). Instead, it shall be returned to the place of purchase or
handed over to a public collection point for the recyclable waste. By ensuring
this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. Contact
your local authority or the nearest collection point for further details.
Improper disposal of this type of waste may result in fines in accordance with
national regulations.