Foxwelltech T2000WF TPMS Service Tool Wifi User Guide

Table of Contents

Visit Foxwell website www.foxwelltech.us and press Register icon, or go to the registration page by selecting Support from home page and then click Register.
Enter one of your email addresses as your user ID and click the Send Code button. Find the security code in your mailbox, input the code, create a password and click Free Registration to complete.
Sign in to the Member Center, click New Registration, input the right serial number and click Submit to activate the product. (Password is not required)

To find the serial number:

Enter Update and connect WIFI, then scan the QR code to register.
Scan the QR code and enter your own email address. Click “Send code” to find the verification code in your mailbox.
Create a password and then click “Free registration” to complete.
After logging in successfully, click the Submit button to complete product registration when the serial number shows automatically or input correct serial number manually.

Highlight TPMS from the main menu and select the vehicle model as need.
Select Trigger from the available menu.
Place the tool to the correct position to ensure sensor activation and decode.
Press Activate to test the TPMS. If test passes, TPMS data will be briefly displayed for 3 seconds.

The scanner has a built-in lithium-ion polymer rechargeable battery.
The unit charges on any of the following sources:

Manual Create

Clone by Activation

Highlight TPMS from the main menu and select the vehicle model as need.
Select Programming- Clone by Activation from the available menu.
Place the tool near the original sensor to be copied and press Activate to continue.
After trigger successfully,press Y to continue.
Place a new Foxwell sensor near the TPMS tool (around 0-20 cm).
Press F3 to start the programming when the tool detect the sensor.

Automatic Create (1-16 sensors)

Clone by OBD

Highlight TPMS from the main menu and select the vehicle model as need.
Select Programming– Clone by OBD from the available menu.
Insert the Foxlink with the vehide and turn the ignition on.
Select the sensor ID to be copied after reading ID information successfully and press Y to continue.
Place a new Foxwell sensor near the TPMS tool (around 0-20 cm).
Press F3 to start the programming when the tool detect the sensor.

Before updating, please make sure you have created a Foxwell ID and your network works correctly.

Enter Update and select an available WIFI to connect.
Choose the software you wish to update and click the Update or Select All button to download.
When all are updated, an “All software downloads are successfully installed!” message displays.

Contact Us
For service and support, please contact us.

Website : www.foxwelltech.us
E-mail : support@foxwelltech.com
Service Number: + 86 – 755 – 26697229
Fax : + 86 – 755 – 26897226

Read User Manual Online (PDF format)