Kingwear KW105Pro G Smart Watch User Manual

Kingwear KW105Pro G Smart Watch

Product Information

Specifications:

• Model : XYZ-500
• Power: 1200W
• Capacity: 1.5 liters
• Material : Stainless steel
• Dimensions: 10 x 10 x 12 inches
• Weight : 5 lbs

Product Usage Instructions

1. Initial Setup:
   Before using the XYZ-500, make sure to wash all parts with warm soapy water and dry thoroughly.

2. Filling the Kettle:
   Open the lid of the kettle and fill it with water up to the desired level indicated on the inside of the kettle.

3. Power On:
   Place the kettle on the base, plug in the power cord, and press the power button to start heating the water.

4. Heating Options:
   Select your desired temperature or setting using the control panel on the base of the kettle.

5. Boiling Water:
   Wait for the water to reach the boiling point. The kettle will automatically switch off once the water is boiled.

6. Pouring:
   Carefully pour the hot water from the spout into your cup or container.

How to wear

Please wear the device on your wrist correctly, about one finger from the carpal and adjust it to comfortable position. Below picture as reference.

Tip : Please wear the device a bit little tighter when heart rate monitors.

How to download & connect to APP

1. Long press the button to power on, slide down from the top from watch face home page, go to “Settings–About–Download QR code” scan QR code to download and install “GIroryFit” APP. You can also scan below “GIroryFit” QR code to download and install “GIroryFit” APP.
2. Go to app “GiroryFit” and select “Add Device on the device page, then follow the instructions on the screen.
3. How to connect to BT call feature:
4. Android phone: After the APP and the watch are successfully bound, it will automatically prompt whether to pair with the audio Bluetooth KW105Pro G (ID-xxxx), please click to pair it directly.
5. IOS phone (IOS model system version 13 and above supports one-key connection prompt) and some Android mobile phones: After the APP is successfully bound to the watch, when using the phone function, you need to manually go to phone settings–Bluetooth–Search audio Bluetooth KW105Pro G ( ID-xxxx) . Click to pair the audio Bluetooth KW105Pro G (ID-xxxx) and the phone function can be used normally only after the pairing is successful.

Tips:

1. Please upgrade the app to latest version to get a better experience.
2. Andorid 5.0 and lOS 9.0 or above system are compatible with the App.
3. For the first time connection with iphone, “Pair” reminder will pop-up, click to pair, then incoming calls and instant messages will be pushed.
4. For the first time connection with android, “Permissions” reminder will pop-up, please follow up the guidance and allow permissions to ensure all functions working properly.
5. To connect successfully, please turn on mobile phone’s bluetooth, GPS and network.
6. If the device cannot be searched or connected during use, please reset or turn off the watch to try again.

Operating Instructions

1. Open the main menu: Single press the side button to display.
2. Open the information: Swipe up from the bottom of the main page.
3. Open the control panel: slide the main page from top to bottom.
4. Shortcut page: Slide the main page from right to left.
5. Split screen : Slide the main page from left to right and slide left to return.
6. Add function components: Slide from right to left on the main page to click “Add Components” to add and delete freely.
7. Quick access to change watch face : Press and hold the main page for 3 seconds to enter the watch face selection interface. Swipe left and right to switch it, and click the selected watch face to successfully set it.
8. Power on/off: Long press the button for 5 seconds on main page.
9. Normal operation function: Press the button to return to the previous function interface.

Function

Other functions
sedentary reminder, do not disturb mode, low battery reminder, incoming call reminder, search watch, online dial/custom dial, 12/24 time system, unit setting, raise wrist to brighten the screen, goal achievement reminder.

Charging

1. Place the watch on the charging head, so that the charging contacts on the back of the watch are completely attached to the metal contacts on the charging head.
2. Connect the charging cable to a standard USB charger purchased from regular channels, with an output voltage of 5V and an output current of 0.5A or above. please wipe off the charging contacts of the charging cable before using it again to avoid sweat or moisture residue.

Warranty

1. One year warranty for default hardware defectives, half of year for battery and charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
3. Personal assemble or disassemble.
4. Falling damage during use.
5. All man-made damage or due to the third party’s fault, improper use(such as: water in the smart watch, external force shattering, scratch during use etc.
6. Please provide a warranty card with the details filled when request for after selling service.
7. Please contact with direct dealers for warranty service.
8. Please note all functions of the product are based on physical objects.

Notes:

1. To ensure waterproof, please DO NOT:
2. Wear the watch during hot shower or in hot tea and other c liquids
3. Remove any screws or buttons.
4. Products with batteries cannot be disposed with household

Please send this product to WEEE collecting points near you.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FAQ

Q: Is it safe to leave the kettle plugged in after boiling?
A: It is recommended to unplug the kettle after use for safety reasons.

Q: Can I use the kettle to boil liquids other than water?
A: It is advised to only use the kettle for boiling water to maintain its functionality and longevity.

Q: How do I clean the kettle?
A: Refer to the user manual for detailed cleaning instructions. In general, wipe the exterior with a damp cloth and descale periodically.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>