Focusrite RedNet 6 64 Channel MADI to RedNet Network Convert User Guide
- August 17, 2024
- Focusrite
Table of Contents
Focusrite RedNet 6 64 Channel MADI to RedNet Network Convert
Specifications
- Product: RedNet 6 / RedNet D64R
- Version: 1.0
About this User Guide
This user guide provides information on the setup and usage of RedNet 6/D64R.
Contents of the Box
The package includes the necessary components for RedNet 6/D64R.
Introduction
Thank you for choosing Focusrite RedNet 6/D64R. This product offers high- quality audio performance.
Installation Guide
Connections and Features of RedNet 6/D64R
- Front Panels: Includes AC power switch, power indicators, and MADI input indicators.
- Rear Panels: Features primary network port for Dante connection, Word Clock In for synchronization, and more.
Power Connection
Connect the power cable securely to the designated port. Use the clip to secure the IEC power cable in place.
Physical Characteristics
RedNet 6/D64R has specific power requirements for optimal performance. Ensure the device meets these specifications.
Operating RedNet 6/D64R
For initial setup and firmware updates, use the RedNet Control application. Digital clock settings are crucial for proper functioning.
MADI Modes
Learn about the available MADI modes and configure them as needed for your
setup.
Sample Rate Converters
Note that engaging sample rate converters may increase overall device latency.
FAQs
Q: How do I update the firmware for RedNet 6/D64R?
A: Firmware updates are automatically managed by the RedNet Control
application. Ensure your device is connected to a stable network for updates.
Q: What cables should I use for connecting RedNet 6/D64R to my network?
A: Utilize standard Cat 5e or Cat 6 Ethernet cables to connect RedNet 6/D64R
to a local Ethernet switch for the Dante network connectivity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>