Bradley SMOKER BT Series Smoker Owner’s Manual

: August 10, 2024
: Bradley SMOKER

Table of Contents

Bradley SMOKER BT Series Smoker
Product Information
Usage Instructions
Important Safety Warnings
GENERAL MAINTENANCE
Trouble Shooting
ASSEMBLY INSTRUCTIONS
External Components List
Internal Components List
OPERATION GUIDELINES
ELECTRICAL CONNECTION SET UP
Display Function Guideline
Documents / Resources

Bradley SMOKER BT Series Smoker

Bradley-SMOKER-BT-Series-Smoker-product-image

Specifications:

Brand: Bradley
Models: BTIS1, BTDS76P, BTST02, BTISCE240EU, BTSTCE240EU, BTDS108P, BTDS76CE-EU, BTDS108CE-EU
Voltage Options: 120V, 240V
Manufacturer: Bradley Technologies Canada Inc.

Product Information

The Bradley Smoker is an insulated smoker oven designed for backyard smoking and slow roast cooking. It automatically generates clean smoke and can be used for cooking, roasting, hot smoking, and cold smoking with superior results. The smoker produces smoke that is four times cleaner than traditional burn-box chips and meets North American and European appliance standards.

Usage Instructions

Safety Warnings:

Basic Safety Precautions: – Carefully read the Assembly Instructions before using the smoker. – Check for any damage before each use.
General Maintenance: – Refer to the External Components List & Internal Components List Diagrams for maintenance.
Troubleshooting: – No Power to Smoker: Check plugs and fuses. – Bisquettes will not Advance: Clear wood chips and clean the smoke generator. – Bisquette does not Burn Completely: Ensure dedicated wall circuit and clean burner. – Smoker Oven Not Reaching Temperatures: Preheat oven, monitor temperature, and
adjust damper if necessary.

Assembly Instructions:
Follow the detailed Assembly Instructions provided in the manual to set up the smoker correctly for use.

FAQ:

Q: What should I do if the smoker oven is not reaching the desired temperatures?
A: Allow the smoker oven time to preheat. Once food is put in, the temperature may drop initially but should rise again. Close the Damper slightly, keep the smoker out of the wind, and use a separate thermometer inside to ensure accurate temperature readings.
Q: How do I troubleshoot if bisquettes are not advancing?
A: Check the drive guide and clear any loose wood chips.
Cleaning the smoke generator can prevent bisquette jamming and wear and tear.
Q: How can I ensure the bisquettes burn completely?
A: Make sure the smoker is plugged into its dedicated wall circuit and that the bisquette burner is free of residue build-up.

$Bradley-SMOKER-BT-Series-Smoker-$1$$

Bradley Technologies Canada Inc. 1609 Derwent Way
Delta, BC Canada V3M 6K8
Toll Free Telephone 1‑800‑665‑4188
Tel: 604‑524‑3848
Fax: 604‑524‑3839
Email: info@bradleysmoker.com
www.bradleysmoker.com
Printed in China
2008
Dear Sir or Madam,
“Revolutionary Smoking Technology for Household Chefs”
Welcome to the wonderful experience of backyard smoking and slow roast cooking. The Bradley Smoker is an insulated smoker oven designed to automatically generate a continuous flow of clean smoke. It is an outdoor electrical appliance that enables one to cook, roast, hot smoke, as well as cold smoke food with consistently superior results using minimal effort.
The Bradley Smoker is unique in that it produces smoke which is four times cleaner than traditional burn‑box chips. Because it automatically extinguishes the spent Bisquette, it prevents the formation of high temperature gases and acids. In addition, the Bradley Smoker meets both North American and European appliance standards.
There are nine different woods of the Bradley Flavor Bisquettes that are made especially for your smoker ‑ Alder, Apple, Cherry, Hickory, Maple, Mesquite, Oak, Pecan and Special Blend. There are a number of recipe cards that come packaged with the Bradley Flavor Bisquettes which are also available in the Bradley Recipe Collection, Volume One. Other items of interest are the Flavor Cures, Bradley Jerky Racks, Bradley Original Racks, Weather Guard Covers, Bradley Cooking DVD, Caps, Aprons, and the Bradley Digital Thermometer with meat probe that takes all the guesswork out of roasting and smoking meat.
I wish you great cooking and smoking for the years to come.
Sincerely,
Wade Bradley
Based on studies and tests preformed at The British Columbia Institute of Technology.

Important Safety Warnings

Basic Safety Precautions

Read all instructions.
Do not touch hot surfaces. Use handles or knobs.
To protect against electric shock, do not immerse cord or plugs in water or other liquids.
Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner or in a heated oven.
Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
Always attach plug to appliance first, then plug into the wall outlet. To disconnect, turn all controls to “off”, then remove plug from wall outlet.
Do not use appliance for other than intended use.
Save these instructions.
For household use only.
Be cautious of sharp edges, when assembling and operating your smoker.
Lift and move smoker with care to prevent strains and back injuries.
Use caution when reaching into or around smoker.
It is recommended that a fire extinguisher be placed near the smoker. Refer to your local authority to determine proper size and type of fire extinguisher.
If an extension cord is required, the cord must be an approved 3‑prong (grounded) heavy duty cord not over 6 feet long.
Do not use power cords if they have been damaged.
Do not use any other type of wood other than Bradley Flavor Bisquettes®.
Properly dispose of all packaging.

When in Use

For outdoors use only. Do not operate in an enclosed area.
Do not leave unattended.
Do not plug in the smoker until it is fully assembled.
Do not cover or seal the racks or drip tray with aluminum foil. This can cause severe damage to your smoker
Do not move smoker.
Do not exceed a temperature of 320°F.
Always wear oven mitts or gloves to protect hands from burns.
Do not wear loose clothing or allow hair to hang freely.
Do not use packaging box to cover the smoker.
Use only approved grounded electrical outlet.
Do not allow rainwater to come in contact with smoker at any time.
Do not use during an electrical storm or in windy conditions.
Do not use near gasoline or other flammable liquids, gases, or where flammable vapors may be present.
Place in an area where children and pets cannot access.
Do not immerse in water.
Empty drip bowl every 2 to 3 hours of burnt wood bisquettes and refilll with fresh water.

After Each Use

Unplug smoker when it is not in use.
See Maintenance Procedures.
Place extinguished Bradley Flavor Bisquettes® at a safe distance from all structures and combustible materials.
Store the smoker in a dry covered place out of reach of children.
Clean out any grease. Grease build up may cause fire.

“Carefully read through Assembly Instructions to prepare smoker for use”

GENERAL MAINTENANCE

Refer to the External Components List & Internal Components List Diagrams

Important Safety Precautions

The Bradley Smoker must be maintained and cleaned after each use.
Unplug the Long Power Cord prior to commencement of any maintenance or cleaning.
Do not immerse smoker in water.
Do not spray inside of smoker with any kind of appliance cleaner.
Do not cover or seal the racks or drip tray with aluminum foil. This can cause severe damage to your smoker.
Do not leave unattended when in use.
Do not spray or clean the smoker with excessive amounts of water. Instead use a damp cloth.

Maintenance Procedures

Clean out the Drip Bowl. Dispose of all burnt Bisquettes carefully as they may still be hot.
Wash the Drip Tray, Racks, Bottom Rectangular Tray and Drip Bowl with hot water and dish detergent or put them in the dishwasher.
Remove food particles and grease residue from the smoker. If the inside needs cleaning, wipe it with a damp cloth.

Note: The tower should have smoke or black residue on the inside. The more residue, the better the product will taste.

The Smoke Generator should be kept clean and free of wood chips and grease at all times. If loose wood chips have collected in the Smoke Generator, simply blow or vacuum these particles away. Unplug the Long Power Cord before removing the Smoke Generator from the Smoke Tower. Refer to “Remove Smoke Generator” in “Assembly Instructions”.
The Bisquette Burner should be lightly scraped using a wire brush or scraper to remove any residue that has been left by the burning process.
Clean the Damper (at the top of the Smoker) to ensure it is not stuck.
Wipe the Door Seal with warm water and dish detergent to remove any leftover residues and food particles.

After Cleaning

Replace Racks, Drip Tray, Bottom Rectangular Tray and Drip Bowl into the smoker, making sure all parts are clean and dry.
Insert the Smoke Generator back into the Smoke Tower.
Make sure the Long Power Cord is unplugged.

Trouble Shooting

No Power to Smoker:
Check that all plugs are correctly and firmly inserted into sockets. Check fuse (located on smoke generator). Check to make sure the outlet, Ground Fault Circuit Interrupter (GFCI), has not been tripped.

Bisquettes will not Advance:
Check the drive guide and clear all loose wood chips. By cleaning the smoke generator, bisquette jamming and undue wear and tear can be avoided.

Bisquette does not Burn Completely:
Check to see if other electrical equipment is plugged into the circuit. The smoker should be plugged into its own dedicated wall circuit. Check to make sure the bisquette burner is free of residue build up.

Smoker Oven Not Reaching Temperatures:
Allow smoker oven time to preheat. Remember, once food is put in the oven, the temperature will drop, and slowly rise again. Try closing the Damper slightly and keeping the smoker out of the wind. Next, try using a separate thermometer inside the smoker oven to ensure the temperature is reading correctly.
Note- Normal cooking temperature is between 200° F – 250° F. Keep in mind that the Temperature shown on the Display is for reference only and is not intended to give exact internal temperatures of the food. The internal temperature will be higher closer to the Heat Element.
If these tips don’t work, please call our Customer Service at 1-800-665-4188.

ASSEMBLY INSTRUCTIONS

Original Black Bradley Smoker (Model: BTIS1; BTISCE240EU)
Stainless Steel Bradley Smoker (Model: BTST02; BTSTCE240EU)
For 4 Rack Digital Smoker and 6 Rack Digital Smoker Assembly Instructions See Page 9
Refer to Part Numbers in the Bradley Smoker External Components List and Internal Components List Diagrams

How to Assemble the Bradley Smoker®

Remove smoker from box.
Take all packaged parts out of smoker.
Remove all protective packaging materials from parts.

Install Smoke Generator:

Attach smoke generator (1) to the smoker tower (2).
Aim the bisquette burner (F) toward the tower opening.
Align smoke generator key holes to smoker tower locating supports (3).
Secure the generator by pushing down firmly.
Insert the feeder tube (4) on top of the smoke generator and load it with the desired number of Bradley Flavor Bisquettes®.
Plug the short jumper cord (E-not shown) from the smoke generator into the smoker tower.

Set Up Smoker Tower:

Place Racks (C) onto side supports.
Place Drip Tray (B) “V” facing down beneath the Racks on the brass side pins.
Place the Rectangular Tray (J) on the bottom of the Smoker.
Fill the Drip Bowl (D) half full of water and place in the center of the Rectangular Tray to catch burnt Bisquettes. During a long smoking period, the Drip Bowl will require changing the water. Plug the Long Power Cord (A) for the smoke generator into an approved grounded electrical outlet.

To Remove Smoke Generator:

Unplug short jumper cord (E).
Detach smoke generator from the smoker tower by raising the smoke generator gently upward and pull it outward.

Handling of Packaging
All packaging should be discarded as per the regulations in your area. The box can be used only to store smoker when not in use. The box should not be used as a cover when smoker is in use.

ORIGINAL BRADLEY SMOKER®

External Components List

$Bradley-SMOKER-BT-Series-Smoker-$3$$

External Parts List

Smoke Generator
Smoker Tower
Generator Supports
Feeder Tube
Smoke Generator Indicator Light
Bisquette Advance Button
Damper with handle (not shown)
Door
Thermometer
Temperature Heat Control Switch
Heat Indicator
Generator On/Off Switch
Door Seal
Lower Face Plate
Rubber Feet
Bisquette (not included with smoker)

Internal Components List

$Bradley-SMOKER-BT-Series-Smoker-$4$$

Internal Parts List

A) Long Power Cord
B) Drip Tray
C) Cooking Racks
D) Drip Bowl
E) Short Jumper Cord (not shown) Connects Generator
F) Bisquette Burner
G) 500 Watt Heating Element
H) Flavor Bisquettes® (not included)
I) Drive Guide
J) Bottom Rectangular Tray
K) Door Hinge
L) Porcelain Holder
M) Temperature Heat Control Switch

OPERATION GUIDELINES

Refer to part numbers in the External Components List Diagram
Seasoning & Preparation
For Use
Seasoning the Bradley Smoker® is an ongoing process, the more you use it, the better tasting your foods will be.
Seasoning is mainly to remove the impartial smells from your smoker. The smell of your new Bradley Smoker® is not necessarily how you want your food to taste.

Seasoning Method:

Clean Racks, Drip Tray, Drip Bowl and Rectangular Tray and place in smoker.
Fill the Drip Bowl half full of water.
Load the Feeder Tube with 5 Bisquettes.(note: each Bisquette burns for 20 minutes). The 2 extra Bisquettes are meant to push the final Bisquette onto the Burner. These last 2 Bisquettes will not advance onto the Burner.
Open the damper slightly at the top of the Smoker Tower.
Plug smoker into its own designated outlet.
Turn on the smoke generator by pressing the Generator On/Off Switch (12).
Press Bisquette Advance Button (6) until a bisquette is on the Bisquette Burner (F).
Turn on the smoker by moving the temperature heat control switch (10) to medium. Wait for 10 minutes. The thermometer (9) should read 66°C (150°F). If it is higher, bring down the temperature by adjusting the temperature heat control switch to the left to lower and vice versa when the temperature reads lower than 66°C (150°F).
Smoke the tower continuously at 66°C (150°F) for 1 hour, or until bisquettes are out.
Your Smoker will be seasoned having reached 150º F and smoked in for 1 hour.

Getting Started

After seasoning the smoker, refill the Drip Bowl half full of water.
Turn on the Smoke Generator by pressing the Generator On/Off switch (12).
When the Smoker Generator indicator light (5) is on, this means the Generator has power.
Press the bisquette advance button (6) to push a Bisquette onto the Bisquette burner (F). Note: After the advance button has been pressed, a new cycle will start, (or) in approximately 20 minutes the next bisquette will advance.
Place your food onto the cooking racks and load them into the smoker.
Set the damper at the desired opening. Do not close the damper all the way when the smoke is running.
If heat is required, slowly move the heat switch to the desired temperature, as per the thermometer.

Cold Smoke ‑ use the smoke generator only. Unplug the Short Jumper Cord.
Hot Smoke ‑ the smoke generator and temperature heat control switch will be on.
Note: The thermometer will only read the air temperature inside the tower. To get a more accurate temperature of the food being smoked, use a meat thermometer. Keep in mind that the ambient temperature will affect the cooking temperature of the smoker.

“ Remember to clean your smoker after each use.”

ASSEMBLY INSTRUCTIONS
4 Rack Digital Smoker (Model: BTDS76P; BTDS76CE-EU)
6 Rack Digital Smokers (Model: BTDS108P; BTDS108CE-EU)
For Original Black Smoker and Stainless Steel Smoker Assembly Instructions See Page 5
Refer to Part Numbers in External Components List, Internal Components List and Electrical Connection Set Up

How to Assemble the Bradley Digital Smoker®

Remove smoker from box.
Take all packaged parts out of smoker.
Remove all protective packaging

Install Digital Smoke Generator:

Attach digital smoke generator (1) to the smoker tower (2) by placing the Bisquette Burner (E) through the left side opening of the tower. Align the generator keyholes to the two supports (3) on the side and push down to secure in position.
Insert the feeder tube (4) into the top of the smoke generator. Push down firmly. Load with desired number of Bradley Flavor Bisquettes®.

Electrical Connection Set Up (see page 12)

Plug the Sensor Cable (1) into the back of the Smoke Generator (A) and Smoker (B).
Plug the Short Jumper Cord (2) into the back of the Smoke Generator (D) and then into the back of the Smoke Tower (C).
Plug the Long Power Cord (3) into the power receptacle (E).

Set Up Smoker Tower:

Place Racks, either four or six (B) onto side supports.
Place Drip Tray (A) “V” facing down beneath the Racks on the brass side pins (I).
Place the Rectangular Tray (D) on the bottom of the Smoker.
Fill the Drip Bowl (C) half full with water and place in the center of Rectangular Tray to catch burnt Bisquettes. During a long smoking period, the Drip Bowl will require changing the water.
Plug the Long Power Cord (3) from the Smoke Generator into an approved grounded electrical outlet (4). (see page 12)

To Remove Smoke Generator (see page 12)

Make sure the Smoke Generator has had time to cool down. Unplug Long Power Cord from the wall outlet (4) and from the Smoke Generator (3). Detach Sensor Cable (1) and Short Jumper Cord (2) and then remove Smoke Generator from the Smoker Tower by raising it gently upward and pulling it outward.

BRADLEY DIGITAL SMOKER®
External Components List

Exterior Parts List

Digital Smoke Generator
Smoke Tower
Generator Supports (not shown)
Feeder Tube
Digital Display Panel (see page 13)
Damper
Door
Door Seal
Rubber Feet
Sensor Cable, Short Jumper Cord & Long Power Cord (not shown, see page 12)

BRADLEY DIGITAL SMOKER®
Internal Components List

$Bradley-SMOKER-BT-Series-Smoker-$6$$

Internal Parts List

A) Drip Tray
B) Cooking Racks (4 or 6)
C) Drip Bowl
D) Bottom Rectangular Tray
E) Bisquette Burner
(Bisquettes not included)
F) Heating Element
G) Top Door Hinge
H) Lower Door Hinge
I) Brass Pin
J) Porcelain Insulator
K) Drive Guide

ELECTRICAL CONNECTION SET UP

After mounting Generator on side of Smoker
(IN THIS ORDER)

$Bradley-SMOKER-BT-Series-Smoker-$7$$

1. Sensor Cable
2. Short Jumper Cord
3. Long Power Cord
4. Wall Outlet
A. Sensor Receptacle
B. Sensor Receptacle
C. Male Receptacle
D. Female Receptacle
E. Male Receptacle

Display Function Guideline

Digital Smoke Generator

Smoke Generator operated by left side control buttons.
Press “On/Off Smoker” to turn Smoke Generator on.
Press “>>> Wood” to advance Bisquettes onto Burner.
Press “Smoker Timer Set” and then “v ^” to desired length of smoking time.
Press “Smoker Timer Set” again to start 20 minute automatic advance.
Press “On/Off Smoker” to turn Smoke Generator off.

Smoker Oven

Smoker Oven operated by right side control buttons.
Press “On/Off Oven” to turn Smoker Oven on.
Press “Oven Temp Set” and then use “v ^” buttons to set desired temperature.
Press “Oven Temp Set” again to set the temperature.
Press “Oven Timer Set” and then use “v ^” to reach desired length of cooking time.
Press “Oven Timer Set” again to set cooking time.
Press “On/Off Oven” to turn Smoker Oven off.

$Bradley-SMOKER-BT-Series-Smoker-$8$$

Display Function
Once the “On/Off Smoker” button has been pressed to turn the smoke generator on, the “Smoker Timer” display will flash until the desired time has been set. The “Oven Meat Temp” will start to read the internal temperature right away. Once the “On/Off Oven” button has been pressed to turn the oven on, the “Oven Timer” display will flash until the desired cooking time has been set. The “Temp Setting” will also flash until the desired temperature has been set.
Press the C/F Button to change the setting from Celsius to Fahrenheit.

Operation Guideline
Seasoning & Preparation For Use

Seasoning the Bradley Digital Smoker is an ongoing process, the more you use it, the better tasting the foods will be.
The Seasoning Process is mainly to remove the impartial smells and flavors from your smoker. The smell of your new Bradley Digital Smoker is not necessarily how you want your food to taste.

Seasoning Method

Clean Racks, Drip Tray, Drip Bowl and Rectangular Tray and place in smoker.
Fill the Drip Bowl half full of water.
Load the Feeder Tube with 5 Bisquettes. Note- Each Bisquette burns for 20 minutes. The 2 extra Bisquettes are meant to push the final Bisquette onto the Burner. These last 2 Bisquettes will not advance onto the Burner.
Open the Damper slightly at the top of smoker tower.
Press “On/Off Smoker” to turn on.
Press “>>>Wood”
Set the “Smoker Timer Set” for 1 hour.
Press “On/Off Oven” to turn on.
Set “Oven Temp Set” to 150° F (66° C).
Set the “Oven Timer Set” to 1 hour.

Note: Your smoker will be seasoned having reached 150° F and smoked in for 1 hour.

Getting Started (see “Display Function Guideline”)

After seasoning the smoker, refill the Drip Bowl half full with water.
Load desired amount of Bisquettes into the Feeder Tube.
Press the “On/Off Smoker” to turn the smoke generator on.
Press “>>>Wood”. Allow time for Bisquette to advance. Repeat this step twice to move a Bisquette onto the burner.>>>
Press “Smoker Timer Set” for length of smoking time.
Place your food onto the Racks and load them into the smoker.
Set the Damper to the desired opening. Do not close damper all the way when smoke is running.
Press the “On/Off Oven” to turn smoker oven on.
Press “Oven Temp Set” to set the heat.
Press “Oven Timer Set” to set length of cooking time.
Empty Drip Bowl every 2 to 3 hours of burnt wood Bisquettes and refill with fresh water.
Cold Smoke- Use the generator only. Unplug the Short Jumper Cord (2).
Hot Smoke- Use the generator and the oven together.

Note: The Digital Display will only read the air temperature inside the tower. To get a more accurate temperature of the food being smoked, use a meat thermometer. Keep in mind that the ambient temperature will affect the cooking termperature of the smoker.

“ Remember to clean your smoker after each use.”

Documents / Resources

| Bradley SMOKER BT Series Smoker [pdf] Owner's Manual
BTIS1, BTDS76P, BTST02, BTISCE240EU, BTSTCE240EU, BTDS108P, BTDS76CE-EU, BTDS108CE-EU, Z1079, BT Series Smoker, BT Series, Smoker
---|---
| Bradley SMOKER BT Series Smoker [pdf] Owner's Manual
BTIS1, BTDS76P, BTST02, BTISCE240EU, BTSTCE240EU, BTDS108P, BTDS76CE-EU, BTDS108CE-EU, BT Series Smoker, BT Series, Smoker