QWERT 8 in 1 Electronic Digital Multifunction LCD Compass Altimeter User Manual

QWERT 8 in 1 Electronic Digital Multifunction LCD Compass Altimeter

Specifications:

• Features: Digital altimeter, digital barometer, digital compass, weather forecast, clock, calendar, thermometer
• Technology: Electronic bearing sensor and air pressure sensor
• Power Source: Two AAA batteries

Product Usage Instructions

Calibration for Digital Compass:

1. Place two AAA batteries in the battery compartment.
2. Press and hold the [COMPASS/-] button to enter calibration mode.
3. Rotate the device 12 circles while keeping the air bubble in the spirit level inside the circle.
4. Press the [COMPASS/-] button to complete the calibration process.

Setting:

1. Press and hold the [SET] button for 2 seconds to enter setting mode.
2. Adjust settings for time format, hour, minute, year, month, date, temperature unit, barometer unit, and altitude unit using the respective buttons.
3. Press the [HISTORY] button to confirm and exit the setting.

Altimeter:
The displayed height value represents sea level at the current location. Press [SET] and [ALTI/+] simultaneously to adjust the altitude reference value.

Barometer:
The displayed air pressure value represents the air pressure at the current location. Use the [ALTI/+] button to switch between altimeter and barometer functions.

Weather Forecast:
The barometer helps forecast weather for the next 12 to 24 hours based on air pressure changes within the range of 30-50km. Please note that the forecast may be affected by external weather phenomena.

Frequently Asked Questions (FAQ):

Q: Do I need to calibrate the compass every time I use the device?
A: No, compass calibration is only needed for the first-time use or if inaccurate readings occur due to prolonged use or magnetic interference.

Q: How can I switch between altitude and barometer functions?
A: Use the [ALTI/+] button to toggle between altitude and barometer modes on the device.

Digital Altimeter, with digital barometer, digital compass, weather forecast, clock, calendar, thermometer. The device is based on the technology of electronic bearing sensor and air pressure sensor.
The digital altimeter is designed for outdoor use, the detachable string makes the digital compass to a perfect hand-carry device for various outdoor activities.
It will give you backlight when you press any button in any time.

OVERVIEW

Two AAA batteries in the battery compartment

Calibration for digital compass

1. Once batteries are placed, the LCD will full display, press [COMPASS/-] button, it will show a wrong direction degree on the LCD.
2. Press and hold [COMPASS/-] button for 2 seconds, it will show ‘CAL’ on the LCD, turn the device 12 circles, press [Compass/-] button, the correct direction angles show on the screen, the calibration process completed. (Note: For more accurate results, the air bubble in the spirit level should be kept inside the circle during the calibration procedure.)
3. At compass mode, it will exit compas s function, if you press [ALTI/+] button.

Note: the device only needs to adjust the compass function when it is used for the first time. After that, there is no need to made adjustment steps. It will need to be re-calibrated unless it is used for a long time or if the compass data is inaccurate due to strong magnetic field interference.

Setting step

1. Press and hold [SET] button for 2 seconds, 24Hr will flash on the top left corner, press [ALTI/+] button to select 24Hr or 12Hr;
2. Press [SET], hour flash, press [+] or [-] to set hour;
3. Press [SET], minute flash, press [+] or [-] to set minute;
4. Press [SET], year flash, press [+] or [-] to set year；
5. Press [SET], month flash, press[+] or [-] to set month；
6. Press [SET], date flash, press [+] or [-] to set date；
7. Press [SET], temperature unit ℃ flash, press [ALTI/+] button to select ℃ or ℉;
8. Press [SET] , barometer unit HPA flash, press [ALTI/+] button to select HPA, inHg or mmHg;
9. Press [SET], altitude unit M flash, press [ALTI/+] to select M or FEET;
10. Press [HISTORY] button to confirm and exit the setting, press [SET] to switch display mode (clock or calendar).

Altimeter

The height value displayed on the screen is the sea level of the current location.
press [SET] and [ALTI/+] at one time, The altitude value will flash, press [ALTI/+] to increase the reference altitude value, or press [COMPASS/-] to decrease it.

At setting process, it will exit setting automatically if you press [HISTORY] button or don’t operate it in ten seconds.

Relative Altitude
You can use this device to monitor the ascending or descending altitude from one certain location or the relative altitude for any mountain or object etc.
In the altimeter mode, press and hold [ALTI/+] button for 2 seconds to clear the altitude value to 0M, then to ascend or descend, the relative altitude from that location where you clear will display in the lower row of the screen. The negative value means that the current altitude is lower than the previous relative altitude; The positive value means the current altitude is higher than the previous relative altitude.
Press [ALTI/+] button to switch the use of altimeter and barometer.

Barometer
The air pressure value displayed on the screen is the air pressure at the current location.
Press [ALTI/+] button to switch the use of altimeter and barometer.

Weather Forecast
Apart from detecting the altitude, barometer also helps to forecast the weather for the forthcoming 12 to 24 hours basing on air pressure changes. The effective range is 30-50km.

1. The weather forecast could be affected by oceanic or continental weather phenomenon, It is not responsible for any inconvenience caused by an Inaccurate forecast.So, please refer to the weather forecast from the local weather station.
2. The weather forecast is meant for the next 12 to 24 hours. It will not reflect the current forecast.

History Altitude Record
Press [HISTORY] button, you can view record of history altitude and air pressure record. It will display the most previous record in this mode, then you can press [ALTI/+] or [COMPASS/-] button to forwards or backwards view history record. It can save most 256pcs records, the records’ distance is five minutes, and you can change the distance time from 1-60 minutes if you press and hold [HISTORY] button for 2 seconds.

Save power design
When you don’t want to use the device, you press and hold [SET] button for 5 seconds, the device will stop all display enter into dormancy mode. And then you press any button, it will resume previous display.

Low battery Warning

When the battery voltage is low, a battery symbol will flash on the screen of the device, indicating that the battery needs to be replaced.

Backlight
In any mode, it can give you backlight for 5 seconds that you press any button; and if the backlight is opened, you press any button, it can extend the backlight time for 5 seconds.

Default Value

1. Default clock：0：00； default display: 24 hours system
2. Default date：2018-1-1，display order is : date-month-year from left to right
3. Default temperature unit：℃
4. Default barometer unit：HPA
5. Default altitude unit：M
6. Default history record distance：five minutes

References

• The domain name forecast.so is for sale

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>