naim HDX Desktop Client Interface User Manual
- August 10, 2024
- naim
Table of Contents
naim HDX Desktop Client Interface
Specifications
- Product Name: Desktop Client Interface
- Version: 2.0.7.1136 and above
- Operating System Compatibility: Windows XP, Windows Vista, Windows 7
Product Information
The Desktop Client Interface allows users to control the HDX system through various user interfaces depending on the installation environment and available equipment.
Product Usage Instructions
Installation:
To install the Desktop Client application, insert the CD included with the HDX into a PC running Windows XP, Vista, or 7. Double-click on the Desktop Client icon and follow the on-screen prompts. Ensure that the HDX is powered on and connected to the network during installation.
Functionality:
The Desktop Client Interface enables control of HDX music playback and provides setup and maintenance functions exclusive to this interface.
Operation:
The Desktop Client interface operates similarly to Windows Explorer, providing a familiar user experience for navigation and control.
Connecting to the HDX:
Upon first run, the Desktop Client application will scan the network to identify connected Naim hard disk players. A window will display a list of found players or servers along with their IP addresses.
Frequently Asked Questions
Q: Which operating systems are compatible with the Desktop Client Interface?
A: The Desktop Client Interface is compatible with Windows XP, Windows Vista, and Windows 7.
Q: How do I install the Desktop Client application?
A: Insert the CD provided with the HDX into a PC running one of the compatible Windows operating systems. Double-click on the Desktop Client icon and follow the installation prompts.
Note: This manual is issue No. 1 and describes the operation of Desktop Client software release version 2.0.7.1136 and above. Earlier software will not operate fully in the manner described in this manual.
Note
To the fullest extent permitted by applicable law, Naim Audio Ltd. disclaims
all liability for any loss or damages whether real, incidental or
consequential that arise from using this product. Naim Audio Limited, its
agents and representatives, cannot be held responsible for the loss of any
data or content from a Naim/NaimNet server, however caused.
Introduction
Unlike a conventional item of hi-fi equipment, the HDX can be operated in a
number of different ways using a variety of user interfaces. The user
interface you use to control your HDX will depend on the type of system in
which it is installed and the ancillary equipment available.
If the HDX is installed in a home network that includes a personal computer
running Windows XP, Windows Vista or Windows 7, it can be operated via the
Desktop Client Interface. The Desktop Client application provides the most
comprehensive operational and search functionality. The Desktop Client is
covered in the following pages.
The Desktop Client Interface
-
The HDX Desktop Client is an application that can be installed on a PC running Microsoft Windows XP or Windows Vista or Windows 7. The PC must be connected to the network that incorporates the HDX. The application and its installer can be found on the CD packed with the HDX.
-
In addition to enabling control of HDX music playback, the Desktop Client interface also provides a variety of HDX setup and maintenance functions that are not available from any other interface.
-
To install the Desktop Client application insert the CD into the PC’s CD drive, double click on the Desktop Client icon and follow the on-screen prompts. Ensure that the HDX
is switched on and connected to the network when the Desktop Client application is run. -
The format of the Desktop Client interface and its operation will be familiar to those with experience of the Windows Explorer file browser application.
Connecting to The HDX
When first run, the Desktop Client application will scan the network to
identify any connected Naim hard disk players. A window will open, illustrated
below, listing the player or servers found and their IP addresses. Each player
“name” listed is a shortened form of the MAC address printed on its rear
panel.
If the Desktop Client has been previously connected to other network items (or
to items with variable IP addresses) these may also be listed. Use the
shortened MAC address shown in the name column to identify the HDX.
If the HDX is not immediately listed, check that it is connected to the
network and switched on, and click on Scan for hard disk players.
Note: It can take as long as a minute for the HDX to “boot-up” and become
visible to the Desktop Client.
Select the Name that refers to the appropriate hard disk player by clicking on
it, and click OK. The selected hard disk player will now be connected to the
Desktop Client.
The Interface Screen
All Desktop Client functions are controlled via one main window. The window comprises a number of separate areas and tools distinguished by their application and context. The windows and tools are identified in Diagram 1.3 and described in the following paragraphs.
Interface Windows and Elements
Transport Controls
As well as providing stop, play/pause, fast forward, fast reverse, step
forward and step reverse, the transport controls also include shuffle, repeat
and rip mode buttons. The rip mode button switches the HDX between Rip and
Playback modes. In Rip mode the HDX will automatically rip a CD inserted in
its drawer. In Playback mode the HDX will automatically play a CD inserted in
its drawer through its local audio outputs.
The shuffle function is applied to the current playlist while the repeat
function can be applied to either single tracks or the current playlist. For
more on creating and managing playlists see Section 1.13.
Application Menus
The application menus comprising File, Edit, Action, View and Help provide a variety of tools and functions. They are described in the following paragraphs.
-
The File Menu
The File Menu provides network Connect and Disconnect commands, and application Exit command. -
The Edit Menu
The Edit Menu provides file utilities (rename, etc.), copy and paste functions, select functions and access to file properties. -
The Actions Menu
The Actions Menu provides alternative access to play, queue and random play functions. -
The View Menu
The View Menu enables selection of alternative interface
views:
Player Mode view in which only the Transport Controls, Currently Playing Data and Application Menus are displayed.
Maintenance Mode view in which only the Music Library data and Music Library detail windows are displayed.
Interrogation of the maintenance screens does not affect the track or playlist currently playing.
Player and Maintenance view in which both modes are displayed. Diagram 1.3 shows the Player and Maintenance view. -
The Help Menu
The Help Menu provides Desktop Client Application installation and version information.
Now Playing
The Now Playing field displays the artist, album, title and genre of the track currently playing.
Interface Tabs
The Interface Tabs serve to select one of three interface maintenance pages: Music Library, Tools and Now Playing.
-
The Music Library Tab
The Music Library tab selects the page illustrated in Diagram 1.3. The external storage hardware items to which the interface is connected (if any, beyond the HDX’s internal storage) are listed in the left hand window. They can be selected and their contents expanded by clicking on their associated + graphics. The display in the right hand window will then show the detail of music files stored on each hardware item. Clicking on the column headings will re-order the list of items sorted by the heading criteria. -
The Tools Tab
The Tools tab selects the interface page illustrated in Diagram 1.8. It provides a set of hard disk player maintenance and setup utilities, listed in the left hand window, that can be selected and their contents expanded by clicking on their associated + graphics. Selecting a utility will open a dialogue box in the right hand window that either provides information, or can be used to specify a variety of hard disk player and network setup parameters.
Diagram 1.8 illustrates the Tools tab with the utilities in the left hand window and displays the Ripping Monitor utility in the right hand window. The full list of tools and utilities is described in Section 1.18.
**Interface Tabs – Tools
Interface Tabs – Now Playing
**
- The Now Playing Tab
The Now Playing tab selects the interface page illustrated in Diagram 1.9. The page displays the track currently playing, its associated information and the playlist in which it is included.
The page also includes a text entry field for naming playlists and buttons for saving, shuffling (randomising) and clearing playlists. For more about creating and managing playlists see Section 1.13.
Simple and Advanced Search
- The search tools of the Music Library page enable music files to be located for immediate playback or for addition to a playlist.
- The Search tools illustrated in Diagram 1.11 enables searches to be carried out of either albums and artists or individual tracks. It is not necessary to type a full name or title in the search entry field although the more detail that is entered, the more fruitful a search is likely to be.
- After entering the search text in the entry field and selecting either Albums/Artists or Tracks Only click on the Go button to initiate the search. The search results will be listed in the right hand Music Library page window. Double click on an item to play it immediately.
- The Advanced Search tool enables a finely targeted search of music files to be performed.
- To begin an advanced search click on the Advanced Search button. A text entry window will open as illustrated in Diagram 1.12.
- The advanced search text entry window enables two sets of search rules that can be configured to search for an album, artist, track, genre, composer, performer or conductor.
- Each rule can also be constrained to contain, begin with, match exactly, not contain or not match exactly the search text.
- A search can also be constrained to match all or any of the search rules and carefully configuring the search rules should enable any specific music file to be found quickly.
- For example, if a music library contained numerous Beethoven symphonies, but only versions conducted by Leonard Bernstein were required for playback, a search set up as illustrated in Diagram 1.12 would quickly find the appropriate music.
Simple Search
Advanced Search
Playlists
A playlist is a list of tracks arranged in a queue for playback. A playlist
may be defined by the running order of an album, by selecting specific tracks
or albums or be created by selecting tracks with the same, artist, genre,
composer, conductor or performer. Playlists can be named and saved for later
use.
To create, name and save a track playlist proceed as follows:
-
Click on the Music Library Interface Tab and then on the + graphic adjacent to the Albums thumbnail to expand the list of albums available to the server.
-
Select the album on which the first track required in the playlist resides and then select that track in the right-hand window. Go to the application Actions menu and select Queue. Alternatively “right click” on the album and select Queue in the pop-up list.
-
Repeat the selection and queuing of tracks until the desired playlist is complete.
-
Click on the Now Playing Interface Tab. The queue of selected tracks will be displayed in the main window. To save the playlist, name it in the text entry field and click on Save. The playlist can be shuffled (randomised) or cleared by clicking on the appropriate buttons. Diagram 1.14 illustrates saving a playlist.
Note: Clearing the current playlist does not delete tracks from the music library, it just removes them from the queue. -
Once saved, the playlist can be recalled from the Music Library Interface Tab. Click on the + graphic adjacent to the Playlists thumbnail to expand the list of saved playlists then select the desired one. To play the playlist go to the application Actions menu and select Play.
Save Playlis
Album Properties
The Desktop Client Application holds more information about specific albums than is displayed in the Player Mode or Maintenance Mode views. The information can be displayed by selecting the album’s properties. To access an album’s properties first right-click on the album name. A pop-up window will display as illustrated in Diagram 1.16.
Note: As well as providing access to properties the right-click pop-up menu
also provides access to a variety of other functions.
Clicking on properties displays the additional information for the album
concerned as illustrated in Diagram 1.17.
Displaying Album Properties
Tools and Utilities
The Tools tab provides a set of hard disk player maintenance and setup utilities that can be selected and their contents expanded by clicking on their associated + graphics. Selecting a utility will open a dialogue box in the right hand window that either provides information, or can be used to specify a variety of hard disk player and network setup parameters. The purpose and use of each tool and utility is described in the following paragraphs. Diagram 1.19 illustrates the full list of tools and utilities.
-
Ripping Monitor
Display real-time progress of CD ripping. -
Ripping Alerts
Displays the server’s ripping log including any alerts. -
Zone Maintenance
Enables network zone definition and maintenance. -
Move Album Monitor
Displays real-time progress of album move operations between storage locations. -
Backup Monitor
Displays backup statistics and enables backup settings to be defined. -
Backup Scheduler
Enables manual backups to be initiated and automatic backups to be programmed. -
System Status
Displays various system status reports. -
System Messages
Displays any system messages. -
Lookup Messages
Displays any CD data lookup messages. -
System Settings
Displays and enables editing of various system settings.
Note: The HDX internal clock and calender can be adjusted here. -
System Functions
Provides image purge, database rebuild functions and version info. Only use if instructed to do so by Naim Technical Support. -
Recycle Bin
Enables items within the recycle bin to be either purged or restored to the library -
USB Devices
Displays a list of current or previously connected USB devices. -
Scanable Network Shares
Displays a list of current or previously connected network devices. -
Stores For Ripped Music
Displays a list of currently enabled Music Stores and their order of priority.
Tools and Utilities
Naim Audio Limited, Southampton Road, Salisbury, England SP1 2LN
Tel: +44 (0)1722 426600 Fax: + 44 (0)871 2301012 W:
www.naimaudio.com
Part No. 12-001-0096 Iss. 1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>