BUGANI HVIN-BS12303 Portable Bluetooth Speaker User Manual

August 10, 2024
Bugani

BUGANI HVIN-BS12303 Portable Bluetooth Speaker User Manual

USER MANUAL
REAL JAZZ MUSIC SPEAKER

PRODUCT OVERVIEW

  • Speaker — 1pc
  • USB-C Cable — 1pc
  • AUX IN Cable — 1pc
  • User Manual — 1pc
  • Quick Start Guide — 1pc
  1. Multi-function Button
  2. Knob Actuator
  3. AUX IN
  4. RESET
  5. USB-C

CHARGE THE SPEAKER

Don’t plug the cable in when your speaker and the charging port are not completely dry. Leave your speaker in a dry area with some airflow to let the port air dry naturally.

POWERING ON / OFF

Press and hold the Power button for 2 seconds to power on.
Press and hold the Power button again for 2 seconds to power off.

The speaker switches off when audio has stopped or buttons have not been pressed for 15 minutes.

BLUETOOTH CONNECTION

  • For first time use and turning on, the speaker will automatically enter a waiting mode for connection.
  • If the Bluetooth device is already connected, press ” ” button to disconnect the current connection and connect with other devices.
  • The speaker will automatically enter pairing mode if it is not connected to a Bluetooth device.

When pairing, enable the Bluetooth function of the phone and search for “ BUGANI Brief Pro ” to connect. When the connection is successful, you will hear a prompt tone and the Bluetooth indicator will turn from
blinking to keeping solid.
Note: To avoid any sudden loud sound output from the speaker, turn down the volume of both the Bluetooth device and the speaker or stop music playback.

AUX IN

Connect a device to the AUX IN jack with an audio cable.

TWS (TRUE WIRELESS STEREO) MODE

You can connect two of the same Brief Pro models together in TWS Mode.

  1. Make sure the speakers are not connected to the mobile phone.
  2. Double-click the ” ” button on any speaker. The speakers are automatically paired. After pairing, the main speaker Bluetooth indicator will blink, and the secondary speaker Bluetooth indicator will remain on.
  3. Enable the Bluetooth function on the phone, search for “ BUGANI Brief Pro ” to connect. After the successful connection, you will hear a prompt tone and the main speaker Bluetooth indicator light will become solid. Also, the Bluetooth indicator light on the secondary speaker will remain solid.
  4. Exit TWS mode: Double-click the “ ” button on the main speaker, and the speaker will automatically exit TWS mode.

BUTTON CONTROLS

RESET

Press the reset button once.

CAUTION

  1. It is not recommended to replace the battery privately.
  2. The battery (battery pack or battery pack combination) must not be exposed to sunshine, fire or similar overheated environments.

BUGANI LIMITED WARRANTY

BUGANi Corporation (“BUGANi”) warrants your product against defects in materials and workmanship when purchased directly from BUGANi or a BUGANi authorized reseller. This warranty is extended only to the original end-use purchaser or the person receiving the product as a gift and shall not be extended to any other person or transferee. The warranty is valid from the date of retail purchase for a period of 1 year. BUGANi will provide the Warranty Services in accordance with the relevant laws and regulations of local government.
This warranty does not cover defects or damage arising from improper use or maintenance, normal wear and tear, commercial use, accident or external causes. Unauthorized repair, modification or customization of your product voids this warranty.
For warranty service on covered defects during the warranty period, contact BUGANi using the contact information at worldwide. Prior to providing warranty service, BUGANi may require you to provide proof of purchase details, including but not limited to a receipt or sales invoice.

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received. Including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2BGTK-BS12303

IC CAUTION:

Radio Standards Specification RSS-Gen, issue 5
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

For more information, please visit www.bugani-global.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals