BUGANI M90 Waterproof Wireless Speaker User Manual

BUGANI M90 Waterproof Wireless Speaker User Manual

DIAGRAM OF CONTROLS

PRODUCT FEATURES

• Great for shower & outdoor use
• Usable, Rugged, Metal housing design
•  30W powerful sound, stereo pairing function
•  Rechargeable battery, hands free function

WHAT’S INCLUDED

• M90unit                         : 1pc
• User manual                 :1pc
• Aux-in Cable —————————————– :1pc
• charging cable ————————————— :1pc

TE CHNOLOGY SPECIFI CATI ON

• Model No: M90
• Speaker dirver: 40
• Sensitivity: 82±3dB
•  Output Power: 15Wx2
•  Frequency Range: 20Hz-20KHz
• Speaker unit size: 3″x2
•  Wireless receive range: about 1 Om
•  Play Time: about 7-8 hours ( with 50% volume)
•  Charging Time: about 5 hours
•  Product Size: 274 xl 66×100 mm

CHARGING WIRELESS SPEAKER

1. Before using your M90 , pis charge it using the micro USB charging cable included in the package The Bluetooth speaker must be turned off before charging, to avoid making the Bluetooth speaker work abnormal, please do not charge when the unit is power on
2.  Plug the small micro USB pin into the charging port on the rear side of speaker, and the another end of the cable (the standard USB 2_0 plug) into any standard USB port (such as a computer or USB charger)
3.  The red LED will automatically turn on while it’s charging, when the power is full , the LED indicator light will be turn off

WIRELESS MODE

PAIRING

1.  Press and hold “I!>” to turn your speaker on_

2. M90 is ready to pairing , the wireless LED indicator will flash blue. Usually set the steps to enter the
   “Settings”-> “connection” ->”wireless”

3. select” M90 ” in the list.

4. Once paired successfully, the power indicator turns blue and makes a prompt sound_

5.  When there is an Incoming call .press” ►II “button to answer. If you need to hang up .pis press” ►II “again Note:

6.  lf the wireless speaker is in low power or in weak state, sometimes it may not be connected to the phone , PC, IPAD or other devices pis charge it immediately before you using

7.  When the enable audio device is wireless connected , if it is exceeds the connection distance over 1 OM, the signal will be disconnected_ when you dosing the speaker, it will automatically reconnect.

WIRELESS PAIRING DIAGRAM

AUX-IN MODE

If your device is not wireless enabled you can still enjoy your music simply by using the Aux-in audio jack. Connecting the speaker with the audio cable that is included in the package to any device with a 35mm standard audio jack Once connected the speaker can be used as a wired speaker.

CARE AND MAINTENANCE

1. Long press ” I!) ” 2 seconds to turn off the device, to make sure that it is properly protected.

2. To avoid high temperatures (above 40 degrees Celsius), for example, in hot cars or direct sunlight.

High temperature will be damage the surface and reduce battery life.

FCC CAUTION

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference .
2. this device must accept any interference received, including interference that may cause undesired operation.
   Any Changes or modifications not expressly approved by the party responsible for compliance could void the uses authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>