BUGANI E8 Lightweight Wireless Bluetooth Headset User Manual

June 6, 2024
Bugani

BUGANI Logo

BUGANI E8

WIRELESS HEADPHONE

USER MANUAL
DIAGRA M OF CONTROLS

BUGANI E8 Lightweight Wireless Bluetooth DIAGRAM OF
CONTROLS

  1. Volume plus button, previous track
  2. Multi-function button (MFB) (start/play/pause/turn off…)
  3. Volume down button, next track
  4. USB-C charging port
  5. AUX audio interface
  6. Indicator light
JACK

BUGANI E8 Lightweight Wireless Bluetooth JACK

USB-C charging port

Before first using BUGANI E8, Please keep the headphone was fully charged.

PRODUCT FEATURES
  • High comfort ear cushions and adjustable headband
  • Captivating Sound with 40mm Drivers
  • Up to 20 hours playtime
  • Truly Wireless 5.0
  • Foldable design for easy travel
  • Lightweight And Comfortable Design
TECHNOLOGY SPECIFICATION
  • Model No.: BH21006
  • FCC ID: 2AOQO-BH21006
  • Wireless version:5.0
  • Wireless profile:HFP A2DP AVCTP AVRCP AVDTP GAVDP
  • Battery: 300mAh
  • Speaker:40mm
  • Music time:20H
  • Charging input criteria:Type-c USB DC-5V/210mA
  • Charging time:2-3H
WHAT’S INCLUDED
  • BUGANI E8 Wireless headphone –– 1pc
  • User manual –– 1pc
  • USB-C charger cable –– 1pc
  • Audio line cable –– 1pc
WIRELESS PARING

In the shutdown state, press and hold the MFB button for 3 seconds, the white indicator light flashes quickly, and there is a “beep beep” prompt sound. For a new device connection, please open the device Bluetooth search and click the Bluetooth name “BUGANI E8 ” to connect. Pairing, you will hear a beep when the pairing is successful.

Note:

  1. If the Wireless headphone is in low power or weak state, sometimes it may not be connected to the phone, PC, IPAD or other devices. please charge immediately before using.
  2. If your computer does not have a Wireless receiver, you will need an additional wireless receiver to pair with BUGANI E8 headphone.
  3. When the mobile phone device is connected, if it is exceed the connection distance over 10M, the signal will be disconnected. But it will automatically connect when the phone is close to the headphone.
GUIDANCE
  • Please read the usual manual before using.
  • Please give the headphone fully charged before using.
  • If the unit is leave unused over 2 weeks , please charge it again, Please choose the certificated power adapter for input charging.
CARE AND MAINTENANCE

Long press 2 seconds to turn off the device, to make sure that it is properly protected.
Avoid high temperatures (above 40 degrees Celsius), for example, in hot cars or direct sunlight (High temperature will be damage the surface and reduce battery life).IPX5 Water resistant is daily life water resistant, Please do not put the speaker into the water / heavy rainy/ liquid or expose under the thunder.

LIMITED WARRANTY

BUGANI products that it will furnish a replacement or repair any part which proves (upon inspection by BUGANI) to be defective under normal use within 12 months of the original purchase date.

This warranty does not apply to appearance items, accessories in the human damage caused by leaking batteries. It also does not apply to the product, or to any part thereof, that has been damaged through misuse or negligence, improper installation and operation.

Furthermore, this warranty will become invalid, in the judgment of BUGANI products or any parts has been installed incorrectly, repaired or altered by other than BUGANI Service department.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.For Service, Warranty, or Product Information,

Please contact BUGANI INTELLIGENT TECH CO., LTD

FCC Warning statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals