OLYMP GOsafe 110 Business Systems Instruction Manual

: June 3, 2024
: OLYMP

Table of Contents

Operating instructions
Overview
Safety information regarding handling batteries
Package Contents
Technical data
Warranty
Cleaning
Disposal
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OLYMP GOsafe 110 Business Systems Instruction Manual

Operating instructions

The operating manual represents a component part of the device. It contains important information regarding safety, use and disposal. Familiarize yourself with all the operating and safety information before starting to use the device. Only use the device as described and for the purpose for which it is intended. Hand over all the documents with the device if it is transferred to third parties.

Overview

Bolts
Reset Button
Battery Compartment
Handle
Keypad
Display
Emergency Lock Cover
External power Box

Safety information regarding handling batteries

Warning! Risk of suffocation through batteries.

Keep batteries out of reach of children.
Seek medical attention immediately if one is swallowed.

Caution! There are different risks involved when dealing with batteries.

Never attempt to recharge standard batteries, never short circuit batteries and/or open batteries. Doing so leads to a potential risk of overheating, fire or explosion.
Improper handling of batteries/rechargeable batteries can endanger your health and the environment. Batteries/rechargeable batteries may contain toxic and environmentally harmful heavy metals (Cd = cadmium, Hg = mercury, Pb = lead). Therefore, hand in used batteries at a municipal collection point. Therefore, separate disposal and recycling of spent batteries is essential for the environment and health.
Ensure the connection terminals are not short-circuited.
Never throw batteries into a fire or water.
Never expose batteries to any mechanical loads.
Leaking batteries could cause damage to the device. If a battery should start to leak, remove it from the device immediately to prevent any further damage. Take the utmost care when handling damaged or leaking batteries and always wear protective gloves.
Avoid any contact with the skin, eyes and mucous membranes. Rinse any parts of the body which have come into contact with battery acid with plenty of clean water and contact a doctor immediately. Avoid extreme conditions and temperatures which could affect the batteries, e.g. by placing them on radiators or exposing them to direct sunlight.
Only use batteries of the type specified.
Never use batteries of different types or new and old batteries together.
Ensure batteries are inserted with the correct polarity.
If the device will not be used for a longer period, switch the device off and remove the batteries.
Remove empty batteries from the device and dispose of them according to the applicable directives.
The batteries must be removed from the device before its disposal.
You are legally obliged to dispose of batteries at your dealer or at the collection points provided by the responsible waste disposal authority.

Package Contents

Check the package contents of the safe before you actually use the safe. If anything is missing or damaged, contact our Service Department.

1x Safe
2x Emergency key
1x Emergency power supply
1x Shelf
4x AA LR6 batteries
4x Fixing screws
1x Instruction manual

Open the safe for the first time / Open the safe with the emergency key:

When opening the safe for the first time, it must be opened with the emergency key.

Remove the cover of the emergency lock
Insert the emergency key and turn it anticlockwise.
Do not let go of the key, otherwise it will return to its original position.
Turn the knob clockwise to open the door.

CAUTION: When finished, remove the emergency key and keep it in a safe place. !!!NOT IN THE SAFE!!!

Inserting the batteries

Open the door and remove the battery cover.
Insert 4 x AA LR6 batteries into the battery compartment.

Low battery level

You should replace all batteries when the display shows “LO-BAT”.

ATTENTION: Replace the batteries by arranging them as indicated by the “+” and “-” signs.

Removing the batteries

Follow the steps below to remove the batteries.

Remove the battery compartment cover.

Caution! Danger of short circuit.

Remove batteries only with a non-conductive object, e.g. a wooden or plastic spatula.

Remove the batteries.

Replace the battery compartment cover.

Closing the door

Close the door of the safe
Turn the knob anticlockwise to close the door.

Open door with user code

Press “#” to activate the safe, the display shows ” – “.
Enter your password (1 to 6 digits), each press results in a beep.
Press the “#” button to confirm, the display shows “OPEN”.
Turn the knob clockwise and pull it outwards within 5 seconds, the door will open.

ATTENTION: The preset user code is “1234” and the preset master code is “123456”!

Open door with hidden user code

Press “#” once to activate the safe.
Then press “*” once before entering the password.
As you enter the code, it disappears from the display.

Setting the user code

Variant 1:

Open the door and press the reset button once.
The display shows “-“.
Then enter the new user code (1-6 digits) and press “#” to confirm.
The display shows “IN”, which means that the setting of the new user code was successful.

ATTENTION: Please leave the door open before the test of the new user code is successful!

Variant 2:
• Press “#” to activate the safe.
• The display shows “-“.
• Then enter the previous user code and press “#” to unlock the safe.
• Press “*” once while the display shows “OPEN”.
• The display shows “-“.
• Enter the new user code (1-6 digits) and press “#” to confirm.
• The display shows “IN”, the new user code has been set successfully.
ATTENTION: Please leave the door open before the test of the new user code is successful!
Einstellung des Mastercodes

Variant 1:

Leave the door open.
Press “#” to activate the safe.
Press “0” twice and the reset button once.
The display shows “-“.
Then enter the new master code (1-6 digits) and press “#” to confirm.
The display shows “IN”, which means that the setting of the new master code was successful.

ATTENTION: Please leave the door open before the test of the new master code is successful!

Variant 2:

Press “#” to activate the safe.
The display shows “-“.
Then enter the previous master code and press “#” to unlock the safe.
Press “*” once while the display shows “OPEN”.
Then the display shows “-“.
Enter the new master code (1-6 digits) and press “#” to confirm.
The display shows “IN”, the new master code has been set successfully.

ATTENTION: Please leave the door open before the test of the new master code is successful!

Alarm – Wrong code

If 3 consecutive incorrect entries are made, the warning tone sounds for 20 seconds.
The safe locks itself for 3 minutes and the display shows a countdown of 180 seconds.

CAUTION: The keypad is disabled during the beep. You can only stop the beeps by opening the safe with the emergency key and disconnecting the power supply by removing the battery.

Alarm – Shake alarm

Press “*” while the safe is in sleep mode.
The display shows “ALERT”, which means that the safe is in alarm mode.
The safe will activate the alarm for 20 seconds if it is moved or shaken.
You can stop the alarm by entering the correct password.

Mounting method

Mount the safe in a place that is not easy to move.

Drill the holes for the expansion screws (or clamping screws) in the right place.
Turn the expansion screws anticlockwise to loosen them.
Use the expansion screws (or the clamping screws) to fix the cabinet to the wall.
Make sure the enclosure is fixed in the right place, then tighten all the screws

CAUTION: Use the expansion screws if there is a concrete wall. Use the clamping screws if there is a wooden wall.
Mounting

Technical data

Dimensions (H × W × D): Outside: 250 × 350 × 250 mm / Inside: 247 × 347 × 190 mm
Weight: 8 kg
Lock variant: Code, emergency key
Wall thickness: 4 mm
Body thickness: 1.5 mm
Batteries: 4 × AA LR6 (Mignon)

Warranty

Dear customer,

We are delighted that you have chosen this equipment. In the case of a defect, please return the device together with the receipt and original packing material to the point of sale.

Cleaning

Clean the surface of the housing with a soft, dry, lint-free cloth. Do not use any solvents or cleaning agents

Disposal

Packaging materials must be disposed of according to local regulations.

The device and packaging materials can be recycled; sort them for disposal to simplify waste management. The Triman logo is only relevant for France.

The packaging is made of environmentally friendly materials that you can dispose of at local recycling points. Advice on the options with which to dispose of your old device can be obtained from your municipal or local administration offices.

The adjacent symbol indicates laws dictate that electrical and electronic apparatus no longer required must be disposed of separate from domestic waste. Dispose of your device at a collection point provided by your local public waste authority. Packaging materials must be disposed ofaccording to local regulations.

Defective or empty batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Return batteries and the device via the collection points provided.
Disposal

Observe the identification on the packaging materials during the waste sorting process; they are identified by abbreviations (b) and numbers (a) which have the following significance: 1–7: plastic/20–22: paper and cardboard/80–98: composite materials.

The device and the packaging material can be recycled, so sort them prior to disposal for better waste management. Contact your local authorities for information on the various options available to ensure correct disposal. Observe the following identifications of the packaging materials: (a) numbers, (b) abbreviations and (c) materials which have the following significance: 1–7: plastics / 20–22: paper and cardboard / 80–98: composite materials and (d) type of packaging. The logo is only applicable to Italy.

Find out about the possibilities of taking back old appliances and used batteries free of charge from your dealer.
Disposal

The CE Mark on the device confirms conformity. The Declaration of Conformity can be read online at www.go-europe.com or http://productip.com/?f=1670dd

The full EU Declaration of Conformity is available online by scanning the QR code: