CMM OFFROAD RAM Truck Universal Accessory Mount Instructions
- August 9, 2024
- CMM OFFROAD
Table of Contents
CMM OFFROAD RAM Truck Universal Accessory Mount
Product Information
Specifications
- Product Name: CMM RAM Truck Universal Accessory Mount
- Required Tools: 6mm and 9/64 Allen Wrenches, 10mm socket and ratchet
Product Usage Instructions
- Remove the factory plastic cover from the center trim.
- Using a 10mm socket, remove the factory mounting bolt.
- The base for the accessory mount is indexed to fit into the plastic only one way. The fin in the plastic corresponds to the cutout in the mount base.
- Push the Mount Base into the recess and install a 6mm bolt using the 6mm Allen wrench. Firmly snug.
- Mount the riser plate with the 8-32 screws. The angle plate can also be installed in the desired position.
Frequently Asked Questions (FAQ)
-
Q: Can this accessory mount fit on any vehicle?
A: This accessory mount is designed specifically for CMM RAM Trucks. -
Q: Are additional tools required for installation?
A: Yes, you will need 6mm and 9/64 Allen Wrenches, as well as a 10mm socket and ratchet for installation.
“`
CMM RAM Truck Universal Accessory Mount
Thank you for purchasing the CMM RAM Truck Universal
- Accessory Mount You will need
- 6mm and 9/64” Allen Wrenches
-
Remove the factory plastic cover from the center trim.
-
Using a 10mm socket, remove the factory mounting bolt.
-
The base for the accessory mount is indexed to fit into the plastic only one way.
The fin in the plastic corresponds to the cutout in the mount base. -
Push the Mount Base into the recess and install 6mm bolt using the 6mm Allen. Firmly snug.
-
Now you can mount the riser plate with the 8-32 screws. Angle plate can also be installed in the 10mm socket and ratchet desired position.