KitchenAid KDTE104KPS Two Rack Dishwasher User Guide
- August 9, 2024
- KitchenAid
Table of Contents
KitchenAid KDTE104KPS Two Rack Dishwasher
Product Information
Specifications:
- Brand: KitchenAid
- Model: [Model Number]
- Capacity: 12 place settings
- Power Supply: [Voltage/Amperage]
- Dimensions: [Dimensions]
Product Usage Instructions
- Product Registration & Owner Information:
To register your product, locate the QR code on the serial tag of your appliance. You can find the KitchenAid Brand Home Appliances Customer eXperience Center addresses in Benton Harbor, MI, and Mississauga, Ontario for registration. Registering allows access to warranty information and important notifications.
Operating Instructions :
-
Warning: Ensure the dishwasher is fully installed before use to prevent hazards. Avoid pushing down on the open door to prevent injuries.
-
Sanitation Cycles:
Prepare and load the dishwasher following the recommended loading pattern for 12 place settings.- Add detergent and rinse aid as needed.
- Select additional options like Hi Temp Wash, Sani Rinse, Heat Dry Extended, etc.
- Check that all arms spin freely before starting the cycle.
- Select the desired cycle from options like ProWash, Tough, Normal, Express Wash, and Rinse Only.
User-Maintenance Instructions:
Filter Cleaning
Filters should be removed and cleaned regularly. To clean, pull out the
lower rack, grasp the Filter Cup, rotate it counterclockwise, and remove it.
Rinse both parts under cold water using a soft brush if needed. Reassemble the
filter components correctly before operating the dishwasher.
FAQ (Frequently Asked Questions):
-
Q: How often should I clean the filters?
A: Filters should be removed and cleaned regularly, ideally after every few wash cycles or if you notice food particles stuck in them. -
Q: Can I use any detergent in the dishwasher?
A: It is recommended to use dishwasher-specific detergents to ensure optimal performance and avoid damaging the appliance.
QUICK START GUIDE KITCHENAID® DISHWASHER
PRODUCT REGISTRATION & OWNER INFORMATION
- YOUR QR CODE UNLOCKS… product registration and warranty information, installation instructions, how-to videos, and additional accessories to get the most out of your product. If you purchased a smart appliance, your QR code will provide instructions on how to download the app and connect. You can access the full Installation, User Maintenance and Operating Instructions, Warranty details, and more by visiting our website at www.kitchenaid.com/owners or www.kitchenaid.ca/owners This may save you the cost of a service call. To receive a free printed copy of the information online, call us at 1–800–422–1230 (U.S.A.) /1-800-807-6777 (Canada) or write to us at:
- KitchenAid Brand Home Appliances Customer eXperience Center 553 Benson Road
- Benton Harbor, MI 49022-2692
- KitchenAid Brand Home Appliances Customer eXperience Center Unit 200-6750 Century Ave. Mississauga,Ontario L5N 0B7
- Register to access warranty information and receive important notifications related to your product. Scan the Photo Registration Card or QR code to register your product.
- WARNING : To reduce the risk of fire, electric shock, or injury to person, read the Important Safety Instructions located in the Safety and Installation Instructions provided before installing or operating this appliance.
OPERATING INSTRUCTIONS
- WARNING
- Tip Over Hazard
- Do not use dishwasher until completely installed.
- Do not push down on open door.
- Doing so can result in serious injury or cuts.
- WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the Installation, User Maintenance and Operating Instructions printed and online before installing or operating this appliance.
SANITATION CYCLES
Sanitized Cycles sanitizes dishes and glassware in accordance with NSF
International NSF/ANSI Standard 184 for Residential Dishwashers. Certified
residential dishwashers are not intended for licensed food establishments.
Only sanitizing cycles have been designed to meet the requirements of the
NSF/ANSI 184 performance standard for soil removal and for sanitization
efficacy. There is no intention, either directly or indirectly, that all
cycles on a NSF/ANSI 184 certified dishwasher meet the NSF/ANSI 184
performance standard for soil removal and for sanitization efficacy.
-
Prepare and Load the Dishwasher (12 Place Setting Recommended Loading Pattern)
-
Add Detergent and Rinse Aid (as needed) to the Dishwasher.
-
Check that All Arms Spin Freely (Items in the rack can block the spray arms.)
-
Select the desired Cycle for your load.
-
Select Additional Options.
-
Start/Resume Cycle. Close the door within 4 seconds for top control models.
Additional Loading tips
- NOTE : Not all cycles, options, and features are available on all models. Appearance may vary.
USER-MAINTENANCE INSTRUCTIONS
- Filter Cleaning
Filters should be removed and cleaned every 1–3 months for best performance. To remove filter, pull out lower rack, grasp Filter Cup and rotate it 1/4 turn counterclockwise. Pull up to remove. Remove the Filter Plate. Rinse both under cold water in sink. A soft brush can be used to remove stuck on food. Replace filter plate. Ensure filter plate is correctly seated under tabs. To install filter cup, push down through opening. Turn clockwise to seat. Filter cup will click in to place when seated properly. Do not operate dishwasher with loose or missing filters.
®/™ ©2024 KitchenAid. All rights reserved. The design of the stand mixer is a
trademark in the U.S. and elsewhere.
Used under license in Canada.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>