Wwinful Large Picture Hanging Strips Heavy Duty Instructions

Table of Contents

Wall Preparation:
- Wipe the wall with rubbing alcohol to keep it dry and clean.
Product Setup:
- Take out the purchased product.
- Take out the hook strips (hook surface) and loop strips (fur surface).
- Fit the hook surface (hook side) and fur surface (loop side) together and pinch them tightly.
- Tear off the smooth-release paper on one backside.
- Attach the strip side without the release paper tightly to the photo frame and press it down for 30 seconds.
- Peel the smooth-release paper on the other back side.
- Apply firm pressure to the frame against the wall for at least 60 seconds to ensure a secure attachment.
Frame Removal Instructions:
- Gently lift the picture frame so that the hook side and the loop side are separate.
- Carefully support the adhesive strip.
- Slowly peel vertically along the wall.
- Tips for Decorating a Photo Wall
- Nine-Grid Photo Wall
- Staircase Photo Wall
- Mirror Reflection Photo Wall
- Spiral Photo Wall
NOTE
- Please do not hang valuable and fragile items, precious souvenirs, or any dangerous items. Do not place hanging items above seats, beds, or any valuable items to avoid falling off due to improper use, causing danger.
- If you paint the wall, please wait at least one month until the paint is dry before using this product. Some latex paint walls may peel off due to their aging. Please check the surface condition carefully before use.

Q: Can I reuse the adhesive strips?
- A: No, for optimal performance, it is recommended to use new adhesive strips each time.
Q: Can I use this product on all wall types?
- A: It is recommended to test a small area before applying to ensure compatibility with your wall surface.

A Multi-Purpose Adhesive Solution for All Types of Walls

Wipe the wall with rubbing alcohol, and keep it dry and clean.
Take out the product you purchased
Take out the hook strips (hook surface)
Take out the loop strips (fur surface)
Two hook strips(hook surface) can not stick to each other
Two loop strips (fur surface) can not stick to each other
Take out one loop strip(fur surface) and one hook strip(hook surface)
Fit the hook surface（hook side) and fur surface(loop side) together and pinch them tightly
Tear off the smooth-release paper on the one backside
Attach the strip side without the release paper tightly to the photo frame and press it down for 30.
Peel the smooth release paper on the other back
Apply firm pressure to the frame against the wall for at least 60 seconds to ensure a secure and sturdy attachment.

Gently lift the picture frame so that the hook side and the loop side are apart from each other
Carefully support the adhesive strip.
Slowly peel vertically along the wall

NOTE

Please do not hang valuable and fragile items, precious souvenirs, or any dangerous items. Do not place hanging items above seats, beds, or any valuable items to avoid falling of due to improper use, causing danger.
If you paint the wall, Please wait at least one month until the paint is dry before using this product. This product applies to surfaces with a temperature of 10°C to 40°C.
Some latex paint walls will peel out due to their aging. Please check the surface condition carefully before use.

Read User Manual Online (PDF format)