RICOTEST Helix WP Tour Boots Tour Master Datasheet
- August 6, 2024
- RICOTEST
Table of Contents
RICOTEST Helix WP Tour Boots Tour Master
Specifications
- Manufacturer: HELMET HOUSE LLC
- Type of PPE: Motorcyclists’ Protective Footwear
- Category of PPE: II (Medium risks)
- Model: HELIX WP TOUR BOOT
- Description: Black protective boot with stiff inserts in polymeric material
- Intended Use: For motorcyclists for normal road activities, mainly for touring purposes
- Size Range: Men’s sizes from 36 to 47
- Technical Standard: EN 13634:2017
Product Usage Instructions
Overview
The HELIX WP TOUR BOOT is designed for motorcyclists engaged in normal road activities, particularly touring.
Features
- Shin insert/padding for front shin bone protection
- External ankle insert/padding for additional protection
- Water-resistant (optional requirement)
Care and Maintenance
Regularly clean the boot with a damp cloth. Avoid using harsh chemicals that may damage the materials. Ensure the boot is dried thoroughly before storage.
Safety Information
Always wear the boots while riding a motorcycle to ensure maximum protection. Do not modify the boot in any way that may compromise its safety features.
FAQ
Can I use these boots for off-road biking?
No, these boots are designed for normal road activities and are best suited for touring purposes.
How should I determine the correct size to order?
Refer to the provided size range (Men’s sizes: from 36 to 47) and choose the size that corresponds to your regular shoe size.
EU Type Examination Certificate
Date: 2024/01/29 n.
722240502/OE
Validity: 2029/01/28
The hereunder described items of Personal Protective Equipment have overcome positively the “EU type examination” (Module B), proving their conformity to the safety and health requirements of the Regulation (EU) 2016/425 (Annex II)
Manufacturer: (Responsible of the PPE)| HELMET HOUSE LLC
26855 Malibu Hills Road, Calabasas, CA 91301, California, USA
Type of PPE:| motorcyclists’ protective footwear
Category of PPE:| II : “medium” risks.
This certificate is based on reference standards listed below: its validity is no longer ensured should new version of the standards come into force.
Model| | “HELIX WP TOUR BOOT”
col. BLACK
Description:
| fastening system : by means of a polymeric zipper closure and metallic slider and a flap with a hook and loop closure;
processing : ago;
outsole : black rubber (FIRHGRS-FS2106-2); midsole : black foam material (FS2106-2);
upper : black coated microfiber (FIRMFS-BK); black PU non-woven Grippy (FIRPUWNG- BK); black fabric matched white material reinforcement (FIRMAT-BK);
collar edging : black PU coated nonwoven material (FIRPUWN-BK); front and rear joint : black TPU matched with white foam;
vamp and rear/quarter lining and bootleg and shinbone : black knitting matched with foam material (FIRPLF) matched with membrane (FIRWPM);
bellow : black PU coated nonwoven material (FIRPUWN-BK); bellow lining : black fabric (FIRTAF-BK).
insole: semi-rigid material covered with the felt material (INSPP);
removable insock (perforated) : grey foam material matched with black fabric (FIRPU+FIRPL);
gearshift lever protective insert : black TPU (FIRTPU).
The boot has stiff inserts in polymeric material inserted into the upper, as follows:
– shin insert/padding : plastic front shin bone protection both sides padded with PU foam (FIRPP);
– external ankle insert/padding : black TPU (FIRTPU).
Technical Standard:| EN 13634:2017| Protective footwear for motorcycle
riders – Requirements and test methods.
Intended use:| use by motorcyclists for normal road activities, mainly for
touring purposes
Size range:| Men’s sizes: from 36 to 47|
Technical File:| DC-17995|
Test report:| RCT n° 4224218/E|
Functions and performance levels:
Requirements according to EN 13634:2017: all mandatory ones, among which:
| Height of the upper: | level 2 |
|---|---|
| Impact abrasion resistance of the upper: | level 2 |
| Impact cut resistance of the upper: | level 2 |
| Transverse rigidity of the whole footwear: | level 2 |
Optional requirements according to EN 13634:2017:
WR = water resistance of the whole footwear.
NOTE: The Technical Standard provides 2 performance levels with level 2
meaning higher performances.
Marking
on stitched labels and displaying the following information:
- CE Marking;
- name and address of the Manufacturer;
- item designation (article name);
- pictogram to indicate the intended use (motorcycling), number and year of the reference Standard, performance levels achieved, optional requirement WR;
- size of the footwear (EU, USA);
- example of date of production (month/year);
- additional information: materials composition.
NOTE: the Technical File contains a more detailed description of the PPE
(material, method of assembly, photographs or drawings), performance data,
safety functions and level of protection, elements of conformity to the basic
and supplementary requirements.
The Technical File is integral part of the present Certification, which has to
be kept available by the applicant to be forwarded – upon request – to the
entitled person (supervising body, Controlling Officer).
RICOTEST Via Tione, 9 – 37010 Pastrengo (VR) tel: +39 045 7170088 fax: +39 045 7110014 email: ce@ricotest.com P.I. 01491930234
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>