VDLXE 75X60 Zoom Spotting Scope Instruction Manual

VDLXE 75X60 Zoom Spotting Scope

WARNING

Do not use this product directly observe strong light sources such as the sun, or it will cause permanent eye damage!

Do not place this product under the sun. Since this product is composed of multiple sets of lenses, it may focus the sunlight that cause fire or damage to the product itself.

Do not use this product while moving, as this may cause the user to step on an unknown object and cause personal injury.

Do not keep the plastic packaging bag in a place where children can reach, as children may put it in their mouth and cause suffocation.

PRODUCT STRUCTURE

1. Eyepiece
2. Adjustable eye mask
3. Focus handwheel
4. Zoom handwheel
5. Bracket adapter
6. Objective lens

PRODUCT INSTRUCTIONS

Remove len cover
The lens cover of this product adopts a simple disassembly design. When using, please remove the eyepiece cover and objective lens cover first.

Adjust eye mask
This product is designed with an adjustable eye mask. In order to achieve the best observation effect, lower the eye mask when wearing glasses; turn up the eye mask when using without glasses.

Adjust magnification
Rotate the magnification knob to make the small pointer point to the lowest magnification, and then aim the objective lens at the target scene to be viewed.

Adjust focusing
Slowly rotate the focus handwheel until the observed object is clear.

Change magnification
Rotate the zoom handwheel to make the small pointer point to the appropriate magnification, and turn the focus handwheel to make the target clear.

Change observation target
If the above adjustment remains unchanged, to change the observation target, please repeat step 3~5 and turn the focus handwheel.

Put on len cover
Please install the cover of eyepiece and objective lens correctly after use, and put it in a cloth bag after reset to prevent the lens from being scratched by hard objects.

FAQ

Cant see the objects

Check if the direction of the telescope is reversed, if not, check whether the magnification is low or high. For the first use, it is recommended to start the focus calibration at a low magnification, calibrate with a 5-10 meter target, and then look into the distance when it is clear, or adjust to a high magnification for observation.

The image is blurry

First check whether the lens of the telescope is clean. If the lens is ok, check whether the focus is in place. When adjusting, move slowly, and pay attention to avoid factors that affect the clarity of observation (see cautions).

Dizziness problem

The telescope lens is composed of optical lenses, which is equivalent to putting several groups of lenses in front of the eyes. When viewing, the telescope will bring the picture closer to the eyes. Don't watch it for too long at the first time, get used to it in 1-2 minutes to avoid visual fatigue caused by prolonged use.

Vision problems

If you are short-sighted far-sighted and wear glasses, you can take off the glasses you wear and use telescope to watch the target (severe astigmatism needs to wear glasses to watch).

Fogging problem

When the temperature difference between indoor and outdoor is relatively large (or the product is stored and packaged from the south to the north), when cold and hot air meet, a layer of fog will instantly form on the lens after opening, which is normal. Put it in a ventilated place to dry or wipe the lens before use.

About magnification

The telescope magnification is not as high as possible, and the normal use magnification of a handheld telescope is between 7-10X. When the magnification of the handheld telescope exceeds 10X, it is theoretically recommended to use a tripod to ensure the stability of the picture. Otherwise, the higher the magnification, the little shake of the hand will greatly affect the stability of the picture, resulting in more shaking of the image. Screen jitter is not good for observing the target, and it is easy to cause visual fatigue and nausea.

CAUTIONS

1. When observing indoors, do not watch through a window. The cleanliness and reflection of the glass will affect the observation effect.
2. Gray weather, dark environment, and backlight will directly affect the observation effect.
3. Connect the mobile phone to take pictures, the higher pixel of the mobile phone camera, the better the effect. Usually the eyes will see more clearly than the mobile phone camera.
4. Use a tripod to assist, the picture is more stable and the effect is better. In addition, the proficiency of the operation also determines the final effect of the observation.
5. Do not use this product to directly observe strong light sources such as the sun, otherwise it may cause permanent eye damage.
6. Avoid touching the lens with fingers. If you want to wipe the lens, please use a clean and soft lens cloth and wipe it clockwise.
7. Use a lens cloth dipped in a small amount of water to wipe the surface stains. Do not rinse with plenty of water.
8. Do not collide or vibrate violently during use to avoid damage to the telescope.
9. If the telescope is found to be faulty, please do not disassemble and repair it by yourself. Should be sent to a professional repair shop or returned to the factory for repair.
10. If the product is not used for a long time, it should be placed in the original package, placed in a place with a suitable temperature, and the telescope should be kept dry for a long time to prolong its service life.

Do not use the telescope to observe the sun directly, otherwise it will cause permanent damage to your eyes! People under the age of 10 should use under parental supervision.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>