KitchenAid AC220V-50Hz Commercial Blender User Guide

: August 6, 2024
: KitchenAid

Table of Contents

KitchenAid AC220V-50Hz Commercial Blender
Specifications
Product Usage Instructions
FAQs
GET BLENDING
GET STARTED
CONTACT INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KitchenAid AC220V-50Hz Commercial Blender

Specifications

Brand: KitchenAid Commercial
Model: Blender
Power Source: Electric
Power Cord: Removable
Power Switch: ON/OFF switch on the back of the blender base
Outlet Requirement: Grounded 3-prong outlet

Product Usage Instructions

Installation:
- Install the back cover onto the rear of the blender base. Ensure proper alignment with the base opening.
- Secure both sides of the back cover over the tabs on either side of the blender base.
- Install thumb screws on both sides of the back cover. Tighten each screw by hand until secure.
- Secure the front cover to the back cover.
Power Connection:
- Warning: Electrical Shock Hazard – Plug into a grounded 3-prong outlet. Do not remove the ground prong. Do not use an adapter or extension cord.
- Attach the removable power cord and plug it into a grounded 3-prong outlet.
- Flip the POWER switch on the back of the blender base to the ON (I) position.
- The blender is now ready to operate. For detailed usage instructions, please refer to the manual provided with the product.

FAQs

Q: Where can I find additional information about the KitchenAid Commercial Blender?
- A: For more detailed information about the KitchenAid Commercial Blender, please refer to your instructions manual or visit www.kitchenaidcommercial.com.

GET BLENDING

DISCOVER MORE

AT KITCHENAIDCOMMERCIAL.COM.

For demo videos, product registration, and more — our quick start page has what you need to help you get the most from your new product.

GET STARTED

QUICK START GUIDE

The KitchenAid Commercial Blender allows you to customize your blending for any recipe you make with the turn of a dial. For complete instructions, go online to www.kitchenaidcommercial.com.

Install the back cover onto the rear of the blender base. Ensure the tab on the base is aligned with the opening on the back cover.
Secure both sides of the back cover over the tabs on either side of the blender base.
Install thumb screws on both sides of the back cover. Tighten each thumb screw clockwise, by hand, until secure.
Secure the front cover to the back cover.
- WARNING: Electrical Shock Hazard
- Plug into a grounded 3-prong outlet.
- Do not remove the ground prong.
- Do not use an adapter.
- Do not use an extension cord.
- Failure to follow these instructions can result in death, fire, or electrical shock.
Attach the removable power cord and plug it into a grounded 3-prong outlet. Flip the POWER switch on the back of the blender base to the ON (I) position. The blender is now ready to operate.
- For more detailed information about the KitchenAid Commercial Blender, please refer to your instructions manual.